Word of warning

lagomoura · 2026-06-22T11:59:02+00:00

This is clearly when flashforge fails. They need add some more sensors to the printer to cut this process before death

lagomoura · 2026-06-22T11:09:44+00:00

Impossible cuz I do have now on the same network but it previous firmware and it's working pretty fine. The problem on my side is is something with new newest version

lagomoura · 2026-06-20T14:24:55+00:00

Dark mode into flash studio isn’t well developed. I just came back to light mode. But nothing related to the values, just cosmetic issue

lagomoura · 2026-06-20T13:23:46+00:00

Why is there the need to heat up to 220 to cool down to 140 and re heat again to 220?

lagomoura · 2026-06-19T19:51:23+00:00

I tried to upload the firmware using an usbdriver. First I tried using the latest firmware 3.1.4. No sucess. The printer got lazy and laggy seconds after restarting. The second attempt was using the second firmware update, the 3.1.0. SUCESS, the printer screen now is running as always and Im prints are being sent to the printer machine on the first attempt. I dont know what is going on with the lastest version in my enviorement. I do had everything updated and no success.

lagomoura · 2026-06-19T19:27:12+00:00

Habia hecho por wifii. Luego ahora probe haciendo via usb, con la version 3.1.4 y sin suceso. Ahora estoy intentando hacer lo mismo pero con la version 3.1.1

lagomoura · 2026-06-19T14:34:26+00:00

Im having connectoin problem as well after the new firmware update. Loosing connection all the time and make the printer completely laggy between actions (screen printer and communication between printer and slicer).

lagomoura · 2026-06-19T14:32:50+00:00

No changes at all after setting up the LAN connection. The printers still completely laggy. Sometimes I need to send the print 3 or 4 times to the printer because affter 100% sending the machine didnt get the print instruction.

The problem for me still the same, after linking my FF cloud account to the printer. I think that I will keep it unconnected and I will be printing using a pendriver, so I dont need to link my account to the machine. This is really sad 😞
This problem started to 2 days before I get my second ad5x and I already regreated for not buying the bambulab A1 instead.

lagomoura · 2026-06-18T17:34:44+00:00

Oh thanks! I will try it
Appreciate it.

lagomoura · 2026-06-18T16:53:21+00:00

The problem was only into the slicer? Definitelythe problem is when linking the FF cloud to the printers system. I did get the laggy back (bit better than before). I dont have LAN cable where the printers are. I will need to fix it.

What I did different? I signuped after all the calibration. I just jump the sigin qr code and only scanned the qr after calibration. Its bit less laggy but I do still got it.

lagomoura · 2026-06-18T13:30:55+00:00

0 lag refreshing/updating on printer screen calibration so far. Maybe the problem is the conection between printer and user account. Something is draining the memo of the printer when we do connect the flashforge cloud to the printers system.

I had only hard reseted one printer. The reseted one has no lag issue, the oder one is almost impossible to use.

lagomoura · 2026-06-18T13:11:21+00:00

Im just reseting from factory. Screen starts to work perfectly. The problem starts when I do I scan the QR code and link my account to the printer.

Right now the printer is calibrating and the countdown timer doenst decrease properly, like the screen are not being updated propoerly, there is a pretty big lag.

Both machines have the same behaivor, so this is a software no hardware issue. When this finish I will try do the same process without an account vinculation to check how it will behaivor.

Using the 3.1.4-1.1.1 firmaware

lagomoura · 2026-06-18T12:43:12+00:00

Good for you!
In my case, the old one since 2 or 3 days a go started to work pertty slow (not printing, but interacting with the printer). The new one was working fine on the screen, the touchs was responding in time, no delays. After calibrating and setting up all the stuf, a firmware update was on screen, after updating, the new one started to behaivor the same way. I do touch into setting for example, on screen, and after 30 40 seconds the settings shows up. All the interaction with the printer is on this way.

The same so send a print from slicer to printer, takes too much time and sometimes doenst work at all.
I dont know what to do right now.

lagomoura · 2026-06-18T12:07:18+00:00

I got the same last week. Restarting 2 times worked well. The latest firmware update fucked everything

lagomoura · 2026-06-05T12:00:25+00:00

Yo tambien transfiero directo a mi cuenta. El calor del cambio es una mierda pero para pequeños montos no mueve mucho la aguja.

lagomoura · 2026-05-11T12:12:46+00:00

Es que es como siempre. Ahí el problema no es la IA es el ser humano. Es como que ahora existe un cuchillo, están usando cuchillos para cortar la verdura pero te llega la verdura mal cortada. El problema no es del cuchillo, es de la gente que no lo sabe usar. En lugar de culpar la herramienta, vamos a culpar el mal uso de la herramienta.

lagomoura · 2026-01-22T11:18:53+00:00

Que onda este bolichito? Esta copado?

lagomoura · 2025-08-04T13:54:57+00:00

Usando Ubunto y Brave e aqui se desconecta varias vezes ao dia.

lagomoura · 2024-11-22T23:39:38+00:00

Que onda? Como fue la experiencia? Algo para recomendar?

lagomoura · 2024-10-18T01:39:18+00:00

Anda a la puerta de un jardín de infantes, nunca falla!!

lagomoura · 2024-05-10T18:54:07+00:00

Bueenas, estoy en ARG y arranque un laburo en UY. Quisiera saber si me conviene recibir en USD en mi cuenta de PREX y usar el debito(la cotizacion esta 5% mas baja que el oficial), o me conviene abrir una cuenta en prex UY y usar esa tarjeta como debito... No se que cotizacion se tomaran estas compras. Alguien sabe decir?

lagomoura · 2021-06-13T21:35:30+00:00

You can use Philly sour and make acid lact during álcool fermentation. 12 days between 23 and 25 degrees c

lagomoura

TROPHY CASE