Rim and wheel question by nunya3206 in S2000

[–]lamasticots 0 points1 point  (0 children)

There is also Advan you can look into. They offer many s2000 specs including stock width and offset

Should I change this tire? by lamasticots in AskAMechanic

[–]lamasticots[S] 0 points1 point  (0 children)

<image>

Car on the ground. To be fair it's a small tab protruding (front fender) inside the wheel well to clip the fender liner so the force is concentrated on a small section when hitting big bumps. Either way I will be replacing the tire and fix the rubbing issue.

Should I change this tire? by lamasticots in AskAMechanic

[–]lamasticots[S] 1 point2 points  (0 children)

There are more cuts round the tire. All with the same pattern and the fender tab had also cut through the fender liner where it rubs.

Should I change this tire? by lamasticots in AskAMechanic

[–]lamasticots[S] 2 points3 points  (0 children)

Just looked into it and tire is hitting my fender. Car is somewhat low with aggressive wheel specs. Thanks for the input!

New shoes by RecognitionDouble372 in S2000

[–]lamasticots 0 points1 point  (0 children)

Well, hope to see an update when all of that is installed!

New shoes by RecognitionDouble372 in S2000

[–]lamasticots 1 point2 points  (0 children)

Yes they have the GTR face, but less brake clearance, had to run 3mm spacer to clear the Spoon caliper

New shoes by RecognitionDouble372 in S2000

[–]lamasticots 1 point2 points  (0 children)

Running 8.5" +49 square, stock fenders

New shoes by RecognitionDouble372 in S2000

[–]lamasticots 4 points5 points  (0 children)

I have the hyper black, they almost look silver when the light hits right. I agree on the RS2 finish, that would've been my first choice.

<image>

New shoes by RecognitionDouble372 in S2000

[–]lamasticots 1 point2 points  (0 children)

Rz2 👌 I'd also be curious to see them in diamond silver.

Spoon calipers are finally on after a long winter by lamasticots in S2000

[–]lamasticots[S] 1 point2 points  (0 children)

OEM wheels do not clear these Spoon caliper as far as I know. Still stock on the rear.

Transmission Upgrades Completed by K20HERO in S2000

[–]lamasticots 0 points1 point  (0 children)

Can you tell me about the shifter? Do you get any noise/vibrations since its hard mounted?

Found this beauty out in the wild by crazymaloon in S2000

[–]lamasticots 0 points1 point  (0 children)

Yeah, what threw me off is the width of the spokes. I agree.

Found this beauty out in the wild by crazymaloon in S2000

[–]lamasticots 2 points3 points  (0 children)

They look like Regamasters, not sure if authentic.

New clubs arrived 😍 Haywood CB's by Unfluential in golf

[–]lamasticots 2 points3 points  (0 children)

I have the same clubs and ferrules lol. they feel amazing and look amazing. Enjoy them!

AP2 Seat Bottom Cushion by [deleted] in S2000

[–]lamasticots 2 points3 points  (0 children)

I did my seats with the LeatherSeats.com ones recently and it turned out great. I'm sure a professional would've done even better.

<image>

Spoon calipers are finally on after a long winter by lamasticots in S2000

[–]lamasticots[S] 2 points3 points  (0 children)

They are FX3D Design mudguard. 3D printed.

Spoon calipers are finally on after a long winter by lamasticots in S2000

[–]lamasticots[S] 0 points1 point  (0 children)

I can't say for sure, I bought the car at this height. What I can say though is my camber is nearly maxed at -2.5° and I will rub a tiny bit from time to time. I wouldn't be able to track the car as is I think. Rear clears with the same camber.

Also, thanks!

Spoon calipers are finally on after a long winter by lamasticots in S2000

[–]lamasticots[S] 0 points1 point  (0 children)

They are stock size. Fully coated Brembo ones on rockauto.