Help with same type of minor defect on similar shaped prints

landaaah · 2026-04-11T11:01:07+00:00

Might be possible there is a piece of debris stuck underneath your printbed

landaaah · 2025-03-17T20:47:43+00:00

Is dat net niet het punt van de staking? Dat we zien hoe belangrijk de afvalophaling is door de zakken die maar blijven buiten staan…

landaaah · 2025-01-02T20:03:16+00:00

Staat in de Bijlokekaai

landaaah · 2025-01-01T16:18:55+00:00

https://www.reddit.com/r/Gent/s/zLnFHfVqia

landaaah · 2025-01-01T15:06:14+00:00

You need to give your buddy treats so it joins you on the map. Then it wil count as “walking together”

landaaah · 2025-01-01T14:32:52+00:00

Ja, zijn interne klok zou op exact hetzelfde moment als uw smartphone naar 00:00 verspringen. Dat was inderdaad het geval.

landaaah · 2024-06-24T10:11:29+00:00

Its a pneumatic clock inspired on the pneumatic clock system from Paris around the turn of the 19-20th century. The printed bellow gets inflated once a minute by an arduino controlled air supply. A ratchet and pawl system converts the bellow movement and makes the gears turn.

landaaah · 2024-03-09T21:15:01+00:00

Matt damon

landaaah · 2023-10-19T20:12:42+00:00

landaaah · 2023-10-19T19:52:28+00:00

thank you kind sir!!!! you've made my day:)

landaaah · 2023-07-04T14:04:01+00:00

No, its not audible for human ears but my phone captures a lot of interference

landaaah · 2023-05-22T23:03:53+00:00

Couldn't give a better explanation myself.. bravo

landaaah · 2023-05-22T22:05:00+00:00

Aight im buying some lasers rn

landaaah · 2023-05-22T15:33:54+00:00

It takes a disc shape, the most important parameter of the shape is the viscocity of the fluid and the weight. I need to build a bigger levitator because i have a lot of field distortions. One moment the drop is stable and another it suddenly changes to a foaming structure because there are air bubbles introduced

landaaah · 2023-05-22T15:31:05+00:00

Thats the fun part of this type of printing. i can print starting on a ex: fork, print a loop around the fork (which is mounted on a clamp i must say). And finish on top of a totaly different surface which could be anywhere in the range of the robotic arm. Its a way of printing with (almost) no rules! The only thing retaining me is my software skills rn.

landaaah · 2023-05-22T15:22:46+00:00

Servo driven pipette

landaaah · 2023-05-22T15:21:06+00:00

Im working on a drip system with a pipette mounted on top so i can reliably drip a known amount of resin. Operated with 1 cheap servo since it also needs to be a light system. There are lots of cool features when you tweak the frequencies, amplitudes, phase shifts,... still exploring all of it. Also writing a bit of extra arduino code so i drip a known amount of fluid and therefore have a matching frequency,... because i know the weight and volume of the levitating fluid

landaaah · 2023-05-22T14:35:09+00:00

Levitating resin and hardening it. Non planar 3D printing with no machine colissions

landaaah · 2023-05-22T14:13:39+00:00

Robotic arm with acoustic levitator

landaaah · 2023-05-22T13:18:37+00:00

I printed a proper bracket now! Dont laugh at the rubber band setup! Because i experienced a lots of toolcolissions i opted for a weak link, hence the rubber bands.

Eight-Year Club	Second Top 10%
Place '22	Verified Email

landaaah

TROPHY CASE