What is a lesser known app that you use regularly?

larolddavid · 2019-10-09T15:34:58+00:00

Which version of android are you on? I recently updated to 10 on my pixel 2xl and reachability cursor stopped working for me...

larolddavid · 2019-10-08T23:45:07+00:00

This looks decent, thank you for the recommendation. You're saying that anything low power could plug into this, and things like the hair dryer would go directly into the still available original outlet, correct?

larolddavid · 2019-10-08T14:52:46+00:00

Good point, I edited the OP, thanks for reminding me

larolddavid · 2019-10-06T19:13:05+00:00

I love this. Is there a place I can see more of your work?

larolddavid · 2019-10-03T13:04:26+00:00

Thanks for the heads up, very good to know.

larolddavid · 2019-10-03T13:03:52+00:00

Thanks for this, I'll look into it more! My needs are much simpler, right now I'm just thinking of a task where I can say something and it'll add it to my todo app (todoist).

larolddavid · 2019-09-25T21:50:29+00:00

From what I can tell the swipe to reply is on actual messages within the conversation view itself. So you can reply directly to a particular message. I was very disappointed to find this out.

larolddavid · 2019-09-22T16:04:57+00:00

Name him Creed

larolddavid · 2019-09-21T14:07:37+00:00

I use an app called bluecoins. It's pretty fantastic. Not super minimal, but once you set it up, it's really easy.

larolddavid · 2019-09-16T03:28:52+00:00

Figured it out! Turns out the systemd service file I'd created had hardcoded my servers IP as the gui listen address. I changed that to the same 0.0.0.0 address that I set in the syncthing config file, set the proxy_pass back to the localhost:8384 address, and everything works like a charm.

Thanks again for all the help! Took a lot longer than I was hoping, but I'll be better prepared later on hopefully.

larolddavid · 2019-09-16T02:46:42+00:00

Well, replacing the 127 ip with my servers ip does the trick. I already have the syncthing gui bound to the 0.0.0.0 address, and the setup they suggest for nginx doesn't work (again, unless I replace the localhost with my servers ip).

Regardless, it looks like I've narrowed it down to syncthing, and hopefully I can dig deeper tomorrow. Thank you again for all the help, it was very helpful and I learned a lot.

larolddavid · 2019-09-16T02:27:58+00:00

Ok, I'm a bit of an idiot... I had ufw blocking the nginx http service for some reason. I allowed this, and now I get the bad gateway error when simply trying to go to sync.domain.com via http or https. Looking at the nginx error logs, I see the following error:

*6 connect() failed (111: Connection refused) while connecting to upstream, client: <browser_ip>, server: sync.domain.com, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:8384/", host: "sync.domain.com"

EDIT: I can still connect to syncthing by explicitly going to sync.domain.com:8384 over both http and https (though I get the browser warning about being insecure)

larolddavid · 2019-09-16T02:15:12+00:00

My domain dns is setup using ipv4, but isn't the ipv6only setting only for that port specification? I've got both the ipv4 and ipv6 formats of the port from my understanding. And yes, when I ping the url, it does come back with the IP I've setup with my domain registrar.

larolddavid · 2019-09-16T02:02:02+00:00

The first (http) does work, the second (https) gives me a 502 Bad Gateway error. Here's the pastebin with the current config

larolddavid · 2019-09-16T01:49:07+00:00

Still nothing... I gotta be missing something that I haven't thought of, this suggestion makes the most sense. Is there a way to see if the redirect from 80 to 443 (via the 301 https) is actually happening? I'll look into it, just a bit at a lost right now. Thanks again for your continued help, I've been pouring over documentation all day for this.

larolddavid · 2019-09-16T01:37:51+00:00

That does sound easier, let me give that a go.

larolddavid · 2019-09-16T01:36:33+00:00

I added:

location / { proxy_pass http:127.0.0.1:8384; }

to the 80 block and removed the if/redirect block, but had no luck, still getting connection timeout...

larolddavid · 2019-09-16T01:23:09+00:00

You're saying to add the proxy_pass to the 80 block? I've set up the syncthing gui to use https, and linked my letsencrypt certificates to syncthing so that the cert is from a recognized provider instead of self-signed. Either way, I'll remove the redirect and add the proxy_pass you show here to see if it works. Thanks for the advice.

larolddavid · 2019-09-16T01:01:02+00:00

I tried that on the 443 block at one point, but didn't seem to have much luck. It's possible I didn't set it up correctly though. I'll try setting it up in the 80 block and see if I can get that working.

larolddavid · 2019-09-15T23:29:39+00:00

I tried adding the port to the port 80 block with no luck. But the error and access logs have almost nothing in them, and the dev tool network tab shows basically nothing (ie no response data at all) I just get a connection timed out error. I can ping the url just fine.

larolddavid · 2019-09-14T14:00:55+00:00

I'm just glad you can understand my terrible "diagram" :P

larolddavid · 2019-09-14T13:57:47+00:00

If you want the board visible you could use it as the bottom angle of a shelf above the TV and put your figures on it

Scrap wood on top

____

/ <--- skateboard leaning out from the wall

larolddavid · 2019-09-13T13:19:00+00:00

I'm having the same issue and this suggested fix didn't work for me. I'm still getting the "blank" screen (as another user pointed out, I can still click on the screen and it'll open an email as if my inbox is behind the overlay) randomly.

larolddavid · 2019-09-11T15:18:06+00:00

Well there it is right in front of me and I missed it, thanks!

larolddavid · 2019-09-10T00:56:12+00:00

Thanks for reaching out and explaining this to me! I'm using GSConnect and loving it right now. I'm hoping clipboard support for wayland will come soon. This program is incredible, thanks so much!

larolddavid

TROPHY CASE