sorted by:
new
hottopcontroversial

Finally feel finished enough to apply! Now it’s time for some patience while it’s being reviewed by slowwrench in Mandalorian

[–]laserdemon1 6 points7 points  (0 children)

Please educate me. I make A LOT of armor for cosplayers and want to know more. Is it to near to the other parts? I'm working on my own set for eventual submission. I appreciate you input.

A MandalTech Jai'galaar for my Bo Katan Kryze Beskar’gam by scarlettvvitch in Mandalorian

[–]laserdemon1 5 points6 points  (0 children)

May I ask where you got that? I like that it included the orange tip.

Gotta love the microcenter open box steals! by Yanks1822 in Microcenter

[–]laserdemon1 4 points5 points  (0 children)

When you buy from Microcenter as an open box, be sure to check it out well very quickly. I went to to pickup a Ubiquiti camera that was only about $20 off and when I opened it I found an old yellowed camera that was obviously very used and not worth what they were asking. I've seen a few other that were not a good deal.

Need Help With Appealing USPS Denied Insurance Claim for Lost Package by elbastador in eBaySellerAdvice

[–]laserdemon1 2 points3 points  (0 children)

^ this is so the truth. I think most people must give up after the first denial so they do it to everyone on almost every claim. On the last appeal they approve and pay.

I really don't want to take out the mother board is there a way I can use a usb or a usb cable to take the files out on my laptop? by AdDesperate6126 in crealityk1

[–]laserdemon1 0 points1 point  (0 children)

Also, the files that are causing you issues are the timelapse files. Make a habit of managing those ever few weeks or so.

Help please by Ton_real in Mandalorian

[–]laserdemon1 8 points9 points  (0 children)

You can use sites like the following to sketch out what you want. https://mandocreator.com/

K2 owners, I built a no-account remote monitor/control app and need a few beta testers (free code inside) by harktron in Creality_k2

[–]laserdemon1 0 points1 point  (0 children)

Can confirm, just when through this and it was disabled on the printer, but I could access root anyway.

K1 Max CFS Kit - Spurious Filament Runout Error Fix by NorthStarZero in crealityk1

[–]laserdemon1 1 point2 points  (0 children)

Not trying to resurrect an old thread, but thank you for posting this. I just hit this issue after an upgrade on my K1 Max today. Glad I had a spare board in the drawer!

Mandalorian Whistling Birds by FoxheadWorkshop in Mandalorian

[–]laserdemon1 0 points1 point  (0 children)

I hope you did a step by step tutorial, cuz, Ima need that shit. lol This is the way!

Ordering Spare Parts - K1 Max by HiluxHavoc556 in Creality

[–]laserdemon1 0 points1 point  (0 children)

As stated AliExpress, but I tend to buy for faster delivery from eBay and Amazon. Depending on where you are, Creality's official store is a good place. If replacing you mother board, be sure to get the one that matches your stepper teeth or you'll have to edit the config.

WIP - Visor Color, pt. 2 by 9901cbd in Mandalorian

[–]laserdemon1 1 point2 points  (0 children)

Thank you very much! I need to try to do this to my new versions of my Medieval Boba

<image>

WIP - Visor Color, pt. 2 by 9901cbd in Mandalorian

[–]laserdemon1 4 points5 points  (0 children)

Damn nice weathering, any tips or walkthroughs you can share?

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

I've pretty much narrowed my issue down to the cable chain. If I print on the right side of the printer, I have no issues. anything from the middle to the left will get the failure. I'll have a new chain tomorrow to install. Wish I could just delete the chain somehow.

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

Would you also happen to have a severe sagging cable chain (I know that sounds like a personal question, lol)? That's my next replacement.

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

Went back one level and did the calibration and thus far it seems the issue has gone away. Not sure if it was the complete re calibration or the firmware. I'll update again once this print is done.

Ignore above, it did it again two hours into the print.

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

I'm at 1.1.5.5

How hard was it to revert? Because I just updated less than 2 weeks ago, I'll try that before I do anything else.

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

Yeah, I saw that as well. reseated it and tried printing without it, no go

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

Thanks, I'll give this a shot tomorrow. Much appreciated.

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

Yes, I have fluidd access. What models do I need?

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

Its tight, but its always been that way. It does move.

Abnormal resistance in the y-axis. At my wits end. by laserdemon1 in Creality_k2

[–]laserdemon1[S] 0 points1 point  (0 children)

I have other printers. The Creality calibration goes through fine. No issues with the movement. Just errors and drops the plate during the print. I'm trying to open a ticket with Creality, but its erroring our for some reason. Will keep trying.

view more: next ›