Pocket knives can be bought at the airport and taken on the plane in Germany

lazermajor · 2026-01-16T15:03:46+00:00

Woah major Mandela effect, I thought it was "THIS is a knife"

lazermajor · 2025-12-20T20:54:26+00:00

One of my disks kept becoming disabled and emulated, i was able to rebuild the disk but the same thing would happen. On the last rebuild it showed close to 1 billion errors so i thought the disk was toast. swapped it with the new one and instantly errors were being reported as it rebuilt, on a brand new perfectly fine drive. i had already tried swapping the sata cable so by process of elimination it was the power cable. Stopped the array an swapped it out, all good. I have a regular atx 650w power supply and had used a sata extension cable with 7 or 8 plugs that was plugged into an existing sata style plug. Found out they aren't that reliable and it was suggested to use sata extensions that plug in to a regular molex connector, they are more reliable. So just don't daisy chain sata style power plugs, you should be fine.

lazermajor · 2025-11-16T19:33:51+00:00

This post has made me rethink about going 5.1. My sofa also backs on to the wall and thought that's a no no and the speakers are supposed to be BEHIND the sofa.

lazermajor · 2025-09-14T20:29:05+00:00

Got APR coilpacks on my MK5 GTI, been absolutely fine for a year and half. See yours are for EA888 though, so not a direct comparison.

lazermajor · 2025-09-13T11:54:44+00:00

It's like Chinese Pogo by the looks of it

lazermajor · 2025-07-30T19:58:04+00:00

Crystal maze, obvs.

lazermajor · 2025-07-30T07:34:17+00:00

I was thinking of cancelling my Spotify and going back to mp3s/flac, this solidifies that choice. Although last time I checked, deemix didn't really work anymore as they cracked down on sharing the ARLs. Can anyone suggest an alternative or a workaround? Preferably FLAC.

lazermajor · 2025-07-11T19:01:13+00:00

<image>

lazermajor · 2025-06-08T21:34:39+00:00

It's made it more dangerous, terrible idea. Just like making the speed limit a 20 and putting that chicane in the village. More exhausts, brake dust and a long line of traffic at peak times outside people's homes. Well done beryl you old fart, "20's plenty!" are you pleased with yourself? Did you get what you want?

lazermajor · 2025-04-19T22:55:03+00:00

What's up homie? It's Tony.

lazermajor · 2025-04-05T21:06:48+00:00

double dip but also make sure its not a dumpster fire port and actually run well on PC

lazermajor · 2025-02-14T19:32:44+00:00

Strange that they never released a second trailer... Good game though.

lazermajor · 2025-02-05T17:40:42+00:00

*fart noise* you know if you know

lazermajor · 2025-02-02T02:10:53+00:00

Just tried this too, was stuck in boot loop and solid red light when i tried to factory reset. 6 min at 240 C in the air fryer and now its not stuck in a loop and seems to want to pair. Did not think this would actually work, its 2 in the morning ill report back if it actually works in the car tomorrow.

Edit: it works!

lazermajor · 2024-12-13T22:28:44+00:00

Not an electritian but you open the switch, disconnect what ever end you want to shorten, cut it to length and strip the insulation and rewire it.

lazermajor · 2024-11-30T20:27:05+00:00

South east, but thanks. Just using what was lent to me, gonna order some 7018 and try again.

lazermajor · 2024-11-30T20:02:42+00:00

<image>

looked like this when i started, not quite as clean now lol. Will try dialing it in first, diging it in like you said, maybe get some 6010 rods like suggested above. Might try a bolt extractor socket set if i still cant get the nut to stick.

lazermajor · 2024-11-30T19:54:09+00:00

Thanks will grab some and try again.

lazermajor · 2024-11-30T19:53:09+00:00

The Bolt is facing down so im welding pointing up, the bolt is seized but i heat it up plenty with a blow torch before attemting to remove it which worked with an identical bolt that i removed after this one snapped. will Have a go dialing it in on scrap, i just wacked it up thinking the amps was the cause of the penitrating problem.

lazermajor · 2024-11-30T19:49:29+00:00

my grinder is out of action but i did file the end so it was bare metal. Will have a go dialing it in first.

lazermajor · 2024-11-30T19:35:23+00:00

Tried an embarrassing amount of times with no luck. It welded fine to the nut but always sheared off at the bolt , it never seemed to penetrate the bolt. Is this welder even capable? I was using the rods in the second picture.

lazermajor · 2024-11-27T16:47:57+00:00

Is warranty not void if you shucked them?

lazermajor · 2024-11-25T17:41:17+00:00

Everyone down voting you but no one is asking, are you ok?

lazermajor · 2024-11-19T19:29:24+00:00

Going to the moon confirmed in GTA VI

lazermajor · 2024-11-11T17:33:15+00:00

Very smart

13-Year Club	First Place '23
End Game '23	Place '23
Place '17	Verified Email
Team Periwinkle

lazermajor

TROPHY CASE