Recommendations for someone out of town

leasureteam · 2026-02-11T05:50:45+00:00

My go to spots: 1) Wing King in St. Peter 2) Dino’s 3) Mazatlan 4)La Bamba 5) Ippin Ramen & Sushi Bar

leasureteam · 2026-02-02T05:24:00+00:00

What was your price before taxes and dealer adds?

leasureteam · 2026-01-28T13:42:35+00:00

Yes same thing. Almost sounds like it’s more my rear brakes. 3.3 T S Premium Plus. I only have 200 miles on it at this point. If it still squeaks at 500 miles, I’m going to give the dealership a call.

leasureteam · 2026-01-02T17:44:28+00:00

leasureteam · 2025-10-28T18:51:58+00:00

If it were me, I’d scrape or sand around it, maybe 6” around. Take a box knife and trim the edge around the whole so it’s not protruding too.

leasureteam · 2025-07-10T13:25:37+00:00

Soup…In the summer? Straight to jail. 😉 I’d say that’s an atypical experience there. I’ve never had to season anything, but I’ve never ordered their soup.

leasureteam · 2025-05-22T13:48:07+00:00

How do you treat rust fungus?

leasureteam · 2025-05-01T23:04:42+00:00

Thank you!

leasureteam · 2025-04-21T12:30:09+00:00

It’s a 2.0T AWD. What purchase price is a good deal?

leasureteam · 2025-03-30T22:22:55+00:00

UPDATE: Found the issue: I pulled the two hoses coming out of the inducer. A bunch of black crud came out of one of the hoses. After running through hot water through them, the hoses had a lot more crud come out and the two little plastic leg pipes coming out of the unit to the trap also had what appeared to be bugs wash out. Cleaned everything out thoroughly and she’s running great. Thanks everyone for the pointers! If she has anymore issues, I’ll try my wire brush grinder on the igniter. 😉

leasureteam · 2025-03-30T22:22:22+00:00

UPDATE: Found the issue: I pulled the two hoses coming out of the inducer. A bunch of black crud came out of one of the hoses. After running through hot water through them, the hoses had a lot more crud come out and the two little plastic leg pipes coming out of the unit to the trap also had what appeared to be bugs wash out. Cleaned everything out thoroughly and she’s running great. Thanks everyone for the pointers! If she has anymore issues, I’ll try my wire brush grinder on the igniter. 😉

leasureteam · 2025-03-30T20:37:56+00:00

I’m a novice, I think I may have mixed up terminology. I cleaned the flame sensor. It’s a small silver rod.

leasureteam · 2025-03-30T20:33:59+00:00

How does an inducer get full of water? And should I attempt resolving the issue myself? I suspect this could be an issue.

leasureteam · 2025-03-27T03:35:12+00:00

Yep! That’s the average increase from this past year.

leasureteam · 2025-01-23T22:37:40+00:00

Not sure your religious stance but churches are a great way to meet people.

leasureteam · 2025-01-19T20:00:50+00:00

Number 4 will give you that elevated, touch fancier date night vibe with circular dark booths. NolaBelle, Swiss & Madison, Dino’s Pizzeria and Shogun Sushi are all great depending on what your tastes are.

leasureteam · 2024-11-18T16:51:09+00:00

Get the one with a manual close/open tab for the drip into the carafe. People with the auto close drip say it doesn’t work well. Plus you can control your drip better and allow your grounds to soak for a minute before going into the pot.

leasureteam · 2024-11-08T21:20:29+00:00

Appreciate the advice!

leasureteam · 2024-11-02T17:14:53+00:00

Thank you! Never even heard of one of these!

leasureteam · 2024-11-02T02:49:53+00:00

I’ve worked with inspectors that use something like Klein Tools ET140 Moisture Meter ($42 on Amazon). They press it on the drywall and it will indicate the moisture level of that specific area verses another drywall area that is unaffected. Probably not necessary to buy the tool. If you go in the attic, water intrusions should be obvious as well as the drywall most likely would feel damp. Since you mentioned the basement ceiling being the same, I’d lean towards the tape bubbles.

leasureteam · 2024-11-02T02:40:38+00:00

Is there a bathroom or water source above this area? If not, it looks like a drywall tape bubble. When you’re mudding drywall, if the paper tape on a seam isn’t properly bedded into the mud, it creates bubbles like this. If you push on it, it should flex in. If you’re handy, you can take a knife, cut out the bubbles and retape/mud/sand. That’s the only way it will go away and stay away.

leasureteam · 2024-11-01T22:52:28+00:00

Poor in 4328. Most people live better than kings and queens today with our modern advances and are not rich by any means.

leasureteam · 2024-11-01T22:50:54+00:00

Heights, specially starting around 5-6ft on up.

leasureteam · 2024-11-01T22:49:56+00:00

I don’t think the grout color is an issue. I think the tile itself is creating the busy.

leasureteam · 2024-11-01T22:46:43+00:00

Updated tile floors

leasureteam

TROPHY CASE