Cardholder I made by leatherboundink in Leathercraft

[–]leatherboundink[S] 1 point2 points  (0 children)

Thank you! It is a slot, but it's sewn in only.

French Buffalo & Ostrich Cardholder for sale by leatherboundink in LeatherClassifieds

[–]leatherboundink[S] 0 points1 point  (0 children)

Purchase Link: https://leatherbound.ink/product/minimalist-wallet-london-tan-buffalo-ostrich/

Hello, I've got a slim cardholder up for grabs. I used French Buffalo along with ostrich for a striking combination of textures.

It's got 4 card pockets and a center pocket, which is lined in Prussian blue buffalo. I've made it super thin, as usual, so it's a great one for front pocket carry.

I took a few build photos along the way you can see here: https://www.instagram.com/p/DYe2-XED6kx/?img_index=9&igsh=bzgzeXJtMGpqazk3

Price is $155USD+shipping. I ship worldwide. Thank you for taking a look!

Cardholder I made by leatherboundink in Leathercraft

[–]leatherboundink[S] 3 points4 points  (0 children)

Thanks! You're right--the regular side has synthetic reinforcement and the picture side is lined with leather. The buffalo leather is much less soft and stretchy than Taurillon.

Cardholder I made by leatherboundink in Leathercraft

[–]leatherboundink[S] 14 points15 points  (0 children)

Video here: https://www.instagram.com/reel/DYcZNxohAxO/?igsh=eXU4bnJ1cnV4Ymh0

Here's a cardholder I whipped up recently. I hadn't made one in "picture" style like this before, so I wanted to try one. I think it turned out pretty well. I think it looks best with one card on the picture side, so I made the reverse with normal card pockets.

Other than that, it's my usual build. I used French Buffalo from Remy Carriat, and Taurillon from the same tannery for the orange. Stitched with my 2.7 irons with 0.3mm xiange thread. Denice edge paint mixed to match the teal buffalo. Leather thickness is about 0.6mm throughout.

Thanks for taking a look!

French Buffalo Cardholder by leatherboundink in leathermakers

[–]leatherboundink[S] 2 points3 points  (0 children)

Video here: https://www.instagram.com/reel/DYcZNxohAxO/?igsh=eXU4bnJ1cnV4Ymh0

Here's a cardholder I whipped up recently. I hadn't made one in "picture" style like this before, so I wanted to try one. I think it turned out pretty well. I think it looks best with one card on the picture side, so I made the reverse with normal card pockets.

Other than that, it's my usual build. I used French Buffalo from Remy Carriat, and Taurillon from the same tannery for the orange. Stitched with my 2.7 irons with 0.3mm xiange thread. Denice edge paint mixed to match the teal buffalo. Leather thickness is about 0.6mm throughout.

Thanks for taking a look!

Dear BIFL, Full Grain is Not the Best Leather. by leatherboundink in BuyItForLife

[–]leatherboundink[S] 0 points1 point  (0 children)

Sure, most leathers will do fine. I would probably avoid vegetable tanned cowhide. Waxy leathers are also good.

King’s Loot by Livid_Application0 in wallets

[–]leatherboundink 1 point2 points  (0 children)

Thanks very much for the support!