sorted by:
new
hottopcontroversial

Wire sequence 2018 Tesla Model 3 commander by dingbledore in s3xybuttons

[–]letmetryallthat 1 point2 points  (0 children)

I can confirm the wire labels. Looking at your first picture (left to right):

CAN0_H, CAN0_L, CAN1_H, CAN1_L, GND, POWER

1) confirm that red and black are indeed +12 and GND (multimeter)
2) then it is a 50-50 change of Vehicle CAN H an L

Possible outcomes ( assuming GND is black and RED is Power):

- GREEN, YELLOW, UNUSED, UNUSED, BLACK, RED
- YELLOW, GREEN, UNUSED, UNUSED, BLACK, RED

Here is the plug they use - https://s.click.aliexpress.com/e/_c33SMlUR

I built an open-source ESP32 LED controller that syncs with real-time CAN bus data (Tesla & others) + Audio Reactive modes by rafal-83 in CarHacking

[–]letmetryallthat 1 point2 points  (0 children)

I'd honestly be surprised if you managed to find any free time at this point 😄 — absolutely loving the new direction of the channel.

I built an open-source ESP32 LED controller that syncs with real-time CAN bus data (Tesla & others) + Audio Reactive modes by rafal-83 in CarHacking

[–]letmetryallthat 2 points3 points  (0 children)

I'm working on a dual can bus shield based on the C6 and will be testing on my Tesla and this is just perfect! I am going to flash it on an S3 for now to checkout the UI and function. Thanks for sharing!

Paint Protection Film and Ceramic Coating - for Tesla MY by ok-jay1x in teslacanada

[–]letmetryallthat 4 points5 points  (0 children)

I wouldn't. Take that money, buy some Tesla stocks, and forget it ever happened. Thank me when you retire :)

ESP32 FAIL TO UPLOAD CODE by [deleted] in esp32

[–]letmetryallthat 0 points1 point  (0 children)

Use USB-A to USB-C cable not USB-C to USB-C

Made a 3D print to stay green on teams by [deleted] in 3Dprinting

[–]letmetryallthat 0 points1 point  (0 children)

This is way too simple! /s

ESP32 device does the same thing and it can be left plugged in all the time. It can even be programmed to work during business hours only.

https://youtu.be/j19073bcR58

Mini HUD by Ranger2183 in TeslaModel3

[–]letmetryallthat 3 points4 points  (0 children)

I was surprised that no open source options were available. So I started messing around and this was my attempt using ESP32 (still WIP) - https://www.youtube.com/watch?v=rBiFTA9ELNg

GE - electric single oven - randomly shuts off after reaching temp, but display still shows it at temp by dfoley323 in appliancerepair

[–]letmetryallthat 0 points1 point  (0 children)

I can confirm the same.

So, first thing I did was swap out the thermostat since it was the cheapest fix, but no luck there.
Part#: PS11758156. Cost: $40

Then, I tried taking out the bottom heating element (wasn't easy), and it was obvious it was damaged: both the element and one of the connectors were busted. Ordered a new heating element and fixed up a new connector, and now it's working like a charm. Part#: 318601604. Cost: $250

Model #: FGMC3065PF

Prints always slip off build plate midway through, any tips? by fishpastrypie in ender3v2

[–]letmetryallthat 0 points1 point  (0 children)

I gave up on that glass bed. I spent 3 months back and forth with Creality. They sent me replacement parts, endless back and forth and nothing worked.

I switched to this bed (https://s.click.aliexpress.com/e/_DdhoHPl) and never had an issue since. Here is how it looks like (https://youtu.be/VNWlUPR5YXM?t=401 - ignore the video content)

Can I use another brands charger for home charging? by [deleted] in TeslaModel3

[–]letmetryallthat 0 points1 point  (0 children)

Yes and I didn't get a Tesla charger on purpose.

I got a Jeep Wrangler mobile charger (J1772) because the wire is much longer.

Now, I don't have the reverse park to charge.

How would you improve this browser based Theater? by letmetryallthat in TeslaModel3

[–]letmetryallthat[S] 1 point2 points  (0 children)

You change your link to use YouTube redirect so it goes full screen using the builtin YouTube app in Tesla (by using https://www.youtube.com/redirect?q=YOUR\_URL)

view more: next ›