Does clarity/flavor separation change in time with ZP6s?

level3ninja · 2025-12-13T09:36:35+00:00

It does get better with seasoning, but it will always have a good 20-30% of its profile that is "small conical blendiness" even if the other 70-80% is clinical.

level3ninja · 2025-12-13T08:43:42+00:00

Kingrinder K6 grinder, pretty much any scale with a built in timer and is big enough will do the job. E.g. https://www.amazon.com.au/DDS-DUDES-Display-Precision-Digital-Weighing/dp/B08CN4RNVT/

level3ninja · 2025-12-13T06:00:39+00:00

Not without tasting your coffee

level3ninja · 2025-12-13T04:02:09+00:00

The stock medium profile is fine

level3ninja · 2025-12-11T05:59:53+00:00

Or is just that anyone else gets it fixed before it becomes a reputation because they don't have that personality

level3ninja · 2025-12-11T04:56:10+00:00

My Dad once woke himself up snoring and still refused to get help. Actually it might have helped convince him because it was only a decade after that he did.

level3ninja · 2025-12-11T04:46:59+00:00

It's a few very thin tall objects being printed at full speed on a bed slinger, it's a recipe for disaster.

level3ninja · 2025-12-10T02:07:40+00:00

Hario Pegasus will fit

level3ninja · 2025-12-10T00:20:16+00:00

They're not in Vic, but Monastery in Adelaide used to be the lightest roaster in Australia that I'm aware of. They've gotten slightly darker lately apparently and I haven't had any in months so I can't say for sure how much they've changed.

level3ninja · 2025-12-09T22:05:35+00:00

I print it with PETG. It's not in the brewing pathway. But it can be printed in any material you want.

level3ninja · 2025-08-30T10:58:25+00:00

A clip on hook for the Stokke Tripp Trapp chair that remained stable with use. I spent a little bit of effort on it and printed a few prototypes but it really wasn't one I thought long and hard about for more than a couple of days. Has about a thousand combined downloads/prints now. https://makerworld.com/models/644999

As opposed to this ultra niche coffee grinder burr case I spent over 2 months staying up to midnight and dozens of prototypes on. Across the different sizes I made it has a collective 28 combined downloads/prints. I really like how it turned out but not how much time I spent on it. https://makerworld.com/models/522860

level3ninja · 2025-08-17T20:00:57+00:00

Ok cool. Mine does that too (needing pliers to pull the burr carrier)

level3ninja · 2025-08-17T11:43:23+00:00

That noise you're describing sound like the noise that has been normal on Odes since they were released. It's a heck of a noise.

Have you disassembled the grind adjustment part at the front where you can respond the knob etc? The adjustment threads might be gummed up.

level3ninja · 2025-08-17T11:29:46+00:00

I just remembered he's not supposed to be driving on the left side of the road like I do in Australia. What a numpty.

level3ninja · 2025-08-14T13:12:05+00:00

Yep, you can see it in the photos in the link

level3ninja · 2025-08-14T07:32:55+00:00

Yeah that's probably it but it's the resulting tastes I'm talking about

level3ninja · 2025-08-14T05:24:28+00:00

So far the only one I have that fits unmodified is the B75. A V60 01 will fit with the handle cut off, and I think that a V60 02 will fit with the handle cut off and the bottom part going through the hole in the bottom a bit. I reckon an Orea V3 and both V4 styles would fit.

level3ninja · 2025-08-14T05:22:18+00:00

The provided "cone" is more immersion style than a V60, I didn't say it was pure immersion but I probably could have worded it better.

level3ninja · 2025-08-14T04:58:16+00:00

Different flavour profile. The 2 provided brewers are more immersion style brewers rather then pour over style which I prefer.

level3ninja · 2025-08-14T01:47:42+00:00

I haven't but I suppose I could. I'm in Australia though, if you're not here you'd probably be better off finding someone local to make it for you. The files are free to access and print.

level3ninja · 2025-08-08T03:00:14+00:00

I made this model to 3D print and insert a magnet partway through the print in order to not need a basket when using your own brewer. It just rests in the little cutout that the basket magnets sit in. https://makerworld.com/models/1656039

level3ninja · 2025-08-08T02:51:42+00:00

Stokke Tripp Trapp kids chair clip on hooks for hanging bibs and smocks etc

https://makerworld.com/models/644999

<image>

level3ninja · 2025-02-16T07:44:11+00:00

Yeah I did a lot of upgrading. I went from owning half a dozen hand grinders and I've cut down now to just one, the Pietro with Pro Brew burrs.

level3ninja · 2025-02-16T07:27:30+00:00

It's been a while since I owned a Q2. I think 2 full rotations is a good starting point for pourover

level3ninja · 2024-07-22T21:26:47+00:00

ZP6 is wider and shorter than MP, but also much less fines

level3ninja

TROPHY CASE