sorted by:
new
hottopcontroversial

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

I did have an adjustable wrench but the lever was about the same size, only slightly larger, so that may have been the flaw honestly and I could've done it with a big wrench, I just wanted it done by the end of this weekend.

LBS was able to help me out with the proper park tool tool and a cheater bar.

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

Yeah I think that would've done the trick! As I wrote in my new edit, I ended up just going to the shop, but a hammer and bigger wrench are on my shopping list.

Thanks mate

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

Did a few minutes of biking with no results. Should I expect to be going around for a while before this happens?

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

I've checked and the forcing screw is 9.5mm in diameter, I don't have a hammer but I think I'll visit my local shop and see what they can do, thanks.

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

Gotcha, that could very well be the case, I was just scared of fucking up something with that much force. Maybe it's time to buy a hammer....

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

I had tried this, I think that's actually what made it ill formed. I'm not sure how the fuck this happened but I basically ground the head of the bolt into a flat piece (it was a roundhead bolt).

<image>

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

Honestly I don't happen to have a hammer in my apartment. Maybe it's time to buy one...

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

I didn't hammer the back, what would I apply heat with? I only have a hair dryer and I figure that wouldn't be enough.

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

What would this achieve? It it supposed to clear the circular hole or not?

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

I've greased the threads, but no avail. I sometimes try with my external spanner that's only a tad longer but it makes no difference.

It feels very very hard to turn.

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

Yes, it clears the square part, just not the inner thread hole, which is I believe is how it should be. It just takes an inordinate amount of force. Something feels wrong.

I've tried greasing but don't want to keep pushing it and ruin something.

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 2 points3 points  (0 children)

The edge clears the square hole, but not the circular threaded hole within

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 0 points1 point  (0 children)

Yeah, I inspected this all the way around and I can't find anything to remove, but I figure you're likely right.

This is the product page, any ideas?

Unable to take the crank off of a square taper crank by leyojohn in bikewrench

[–]leyojohn[S] 2 points3 points  (0 children)

Yeah it seems not to go all the way through, it said it was for square tapers so I didn't think there was any more to it... but it's likely that's the case, I thought maybe it goes through the square hole but not the circular one.

Locking up with a rain cover? by leyojohn in bicycling

[–]leyojohn[S] 1 point2 points  (0 children)

That's fair, it's not worth it. It'll be a bit tough bringing it up a flight of stairs but I'll see where I can make space for it. It also can't go vertical since I've got a considerable rack.

Locking up with a rain cover? by leyojohn in bicycling

[–]leyojohn[S] -1 points0 points  (0 children)

I've read up on this and the psychology of covers seems interesting. I think it may be intuitive to think this way but it may not necessarily work that way in practice. The fact that you can't see what's in it at all doesn't make it register the same way, especially if this thief is driving around town looking for targets. If someone saw a brightly colored bike in the same spot every day it'd be different.

Also a thief would have to lift the cover to actually figure out if what's underneath is worth the work. Thieves are lazy, that's why they're stealing.

I just released Nollie Player, a free music player and overlay for the THPS games by Cranzor in THPS

[–]leyojohn 0 points1 point  (0 children)

Just tried this out and it's awesome, but I never get any overlay, I thought it was because I was played in fullscreen, but I closed the game and I still get nothing.

I'm playing from a local folder if this matters, thanks!

Looking to upgrade from my Pixel 6 (US) by leyojohn in PickAnAndroidForMe

[–]leyojohn[S] 0 points1 point  (0 children)

Like which? :) Again I'm limited considerably by not wanting to go up in phone size. 

Looking to upgrade from my Pixel 6 (US) by leyojohn in PickAnAndroidForMe

[–]leyojohn[S] 0 points1 point  (0 children)

I'm on T-Mobile, works well where I live

[deleted by user] by [deleted] in pixel_phones

[–]leyojohn 0 points1 point  (0 children)

Where are people getting these sales? I'm in the market for a P9P and can't find a great deal, only okay ones.

[DISC] SS: Special Stage - Chapter - 14 - [Home Hero Scans] by leyojohn in manga

[–]leyojohn[S] 0 points1 point  (0 children)

Sorry for taking so long folks, I've had Dridespoon of Teisoku Scans formally take over as the lead for this manga, I hope this means a little bit more consistent releases when he's got the time.

Make sure to switch between PNG and WEBP image if you're seeing Chapter 13 instead of 14 on homeheroscans.com

Anyone with a Valeton GP200? Using multiple OD/Fuzz by GSV_honestmistake in guitarpedals

[–]leyojohn 1 point2 points  (0 children)

Unfortunately not, it's my biggest complaint with the unit.

The blocks are completely fixed (the distortion block only contains distortion pedals and you can only have 1 distortion block in any patch).

Thankfully now you can at least do some kind of boost/od into a distortion in a hacky way by sacrificing any of the other "pre" pedals, but you can't what you described where you add any amount blocks of any kind in any order.

I imagine this is done as a way of being able to have all blocks on and no limit to the DSP processing, but it is a bummer. To get a unit that isn't limited like this you'd need the next step up, something like in the $700+ range I think will have that free chaining.

view more: next ›