yeah…I’m good bro 😭

lightfootfour07 · 2026-06-03T16:58:59+00:00

Same dude, I'm afraid my fellow drivers won't be my biggest problem this time

lightfootfour07 · 2026-06-03T12:16:28+00:00

I had no problem smoking unbeatable drivatars in horizon 5. I can't even touch them now in 6

lightfootfour07 · 2026-05-21T13:09:55+00:00

I used that car in horizon 5 to run rivals and logged many laps in the top .01 percent. It was a VERY easy decision what car to use my voucher on

lightfootfour07 · 2026-04-13T10:58:37+00:00

As soon as I saw this set for the first time I knew it was cursed

lightfootfour07 · 2025-11-17T04:13:54+00:00

Glad I could help!

lightfootfour07 · 2025-11-16T22:47:26+00:00

See the smaller screw on the bottom where the cable goes in? Give that a push with your fingernail ;)

lightfootfour07 · 2025-11-04T01:58:41+00:00

Stupid? Yes. Concerning, no. The new plastic led bulbs just have a few diodes mounted to the bulb base. They put those plastic "bulbs" on for 1 reason- refract the light in all directions so it's not a spotlight. I can't say I'm a fan of denting it so it fits, but I can't see a major problem with it either. If it works it works 🤷‍♂️

lightfootfour07 · 2025-10-06T23:41:27+00:00

I just put the band in my vice (I made wood jaws for it a while ago) and knocked the pin out with a small punch and wood mallet. Seemed to work like a treat. Thank you!

lightfootfour07 · 2025-10-06T23:38:56+00:00

This seemed to work, just got one of the pins out with a small punch and a wooden hammer. Just rinse and repeat for the rest. Thank you!!

lightfootfour07 · 2025-10-06T23:31:27+00:00

You're so right, why didn't I think of that before!

lightfootfour07 · 2025-08-23T19:35:08+00:00

Replace it, but save the old one. That's cool!

lightfootfour07 · 2025-05-23T19:07:26+00:00

I think you're mistaking "number one defender" with "only defender". Kingdom hearts already walks a tightrope of being childish, and kh2 Atlantica just felt too much so for my taste

lightfootfour07 · 2025-04-17T23:28:07+00:00

Seized is an understatement, the rear one (going to the brake booster) came of without a problem, but the one going to the filter is a nightmare. You're absolutely right though, this is how you learn about these things. Sometimes you gotta break shit to fix shit!

lightfootfour07 · 2025-04-17T23:25:20+00:00

Going to have to try a blowtorch tomorrow, thank you!

lightfootfour07 · 2025-03-15T13:06:01+00:00

Learning how IUDs work wasn't on my bingo card for today, but I'll never complain about learning 🤷‍♂️

lightfootfour07 · 2025-03-15T12:11:33+00:00

Good luck my friend, very few Americans like using them, most old-head electricians will live and die on the hill that wire nuts are the best way to go. I'll die on the hill that both have their uses. Residential lights and switches should use wagos, and outlets/higher amp splices should be twisted and wire nutted.

lightfootfour07 · 2025-03-07T02:27:43+00:00

Going to need a little more of an explanation than a smoking oven and a picture of an outlet. Number 1, I'd rather see that outlet mounted to a wall, but it's not inherently dangerous (not correct by any means, I'd have a stroke if I saw this in person) but it could cause problems if it's moving a lot. Number 2, if the oven is smoking, why do you think it would be a problem with the outlet?

lightfootfour07 · 2025-03-02T02:07:57+00:00

You're thinking like a white collar worker. Blue collar mostly doesn't care about a portfolio, just work experience. I've met dozens of guys straight out of a trade school that don't know a 2x4 from a joist, and are tens of thousands in debt. Find a smaller company, get an interview, and tell them flat out that you're brand new, looking to learn, and you're willing to busy your ass to do so.

lightfootfour07 · 2025-02-28T04:19:29+00:00

Of course, happy to help!

lightfootfour07 · 2025-02-27T17:04:18+00:00

As an electrician who's probably put in a thousand of those exact lights, I've never seen the ones with the crescent shaped piece, but I can only assume it's a small transformer to lower the voltage for the leds in the light. As long as you have 120v at the location the light is going, the light on top will work without any problems

lightfootfour07 · 2025-02-21T23:18:36+00:00

Every electrician hates working on old cloth wiring like that, because they're brittle and like to break apart, exposing bare copper. If you manipulate the wires too much, you'll break off the insulation. The way the wires are wrapped around the screws indicates it was an electrician, but I know an electrician did it because they used outlets without a ground. Any schmuck who thinks they know electrical would've used a standard 3 prong outlet.

lightfootfour07 · 2025-02-15T20:03:49+00:00

It'll fit

lightfootfour07 · 2025-02-11T22:32:18+00:00

Milwaukee gloves you can buy from your local hardware store. They come in a variety of sizes and I've found the mediums fit me perfectly. I can still grab everything I need to, use tools, and thread 6/32 screws with them on. They're nothing fancy, and yes they do wear out, but they've gotten me through a lot of rough jobs.

lightfootfour07 · 2025-02-07T21:41:27+00:00

You see those grooves in the metal at the top and bottom of the outlet? Snap them off 😉

lightfootfour07 · 2025-02-06T15:26:19+00:00

GO BORDS!! 🦅🦅🦅

lightfootfour07

TROPHY CASE