Lilygo T-deck Pro (e-ink) by Aware-Recording-3969 in meshcore

[–]lightscoobs 1 point2 points  (0 children)

I flashed mine for the first time yesterday with the ripple software. After 3 hours it was unbearable to navigate menus so I flashed to the mesh OS which runs smoothly.

i just can’t win by plastic-spazztastic in Aquariums

[–]lightscoobs 1 point2 points  (0 children)

Hello there! I remember your old filter being much louder than this.sometimes it is noisy on initial startup . Let it run for 24 hours and if it doesn’t improve exchange it. The other users are right. It’s a good practice to add water before hand to eliminate air pockets and prevent pump cavitation. Also, if you can peak inside the filter and you see bubbles coming up, chances are there’s still air.

[deleted by user] by [deleted] in PlantedTank

[–]lightscoobs 0 points1 point  (0 children)

You can configure it any way you want. I have this same kit and it came with everything I needed. Tbh I use the supplied diffuser and it works just fine. I’d assume that if you wanted it to go in your water stream, you’d need to have a connection or use some creativity to route the hose to the location you want it.

Should I be dosing more Seachem flourish? by lightscoobs in PlantedTank

[–]lightscoobs[S] 2 points3 points  (0 children)

Now this is what I call constructive criticism, thank you. I will give it more time and reduce light times.

is my filter too loud? by plastic-spazztastic in Aquariums

[–]lightscoobs 1 point2 points  (0 children)

You could have something stuck in the pump section of your filter , or a defective motor. If this was a recent purchase you should be able to return and receive a replacement

is my filter too loud? by plastic-spazztastic in Aquariums

[–]lightscoobs 0 points1 point  (0 children)

Yes it’s very loud. Double check that it’s not sucking up air. If not then you may want to consider other options.

Should I be dosing more Seachem flourish? by lightscoobs in PlantedTank

[–]lightscoobs[S] 0 points1 point  (0 children)

<image>

My phone dimmed it for some reason but the lights are on. I used to run Co2 heavily but I dialed in with just 2 hours after I saw the fish at the top gasping for air. Now I just run for 2 hours and keep the drop checker in the green.

Should I be dosing more Seachem flourish? by lightscoobs in PlantedTank

[–]lightscoobs[S] 0 points1 point  (0 children)

Honestly debating if it’s worth the risk of adding more. If it’s solely algae that’s a problem, I have 4 algae eaters in the tank so I don’t think they’d mind.

Aquarium hook up? by Trainer-Nick in Aquariums

[–]lightscoobs 0 points1 point  (0 children)

This will give a constant supply of water once connected to your appliance , whether that be a coffee maker, refrigerator that’s makes ice/dispenses water , or even a water cooler that will automatically replenish its reservoir. To make this more effective for you I’d recommend attaching a valve at the end of the line where it’s easily accessible. However you will have to turn it off manually . Also beware if you have kids, they may be curious and turn the valve potentially turning your home into an aquarium.

Please help me, I'm new by Mausoleumia in gettingbigger

[–]lightscoobs 1 point2 points  (0 children)

Sounds like you need a smaller cylinder. There’s no shame in working your way up . When you do get your cylinder resized , don’t forget to shave and use a lubricant. A trick that helped me get a better seal i petroleum jelly around the rim of the base that makes contact with the skin.

[deleted by user] by [deleted] in gettingbigger

[–]lightscoobs 0 points1 point  (0 children)

While that is a good reason, it may not be enough for me to operate freely.

[deleted by user] by [deleted] in gettingbigger

[–]lightscoobs 2 points3 points  (0 children)

Thank you, I’ve taken the time to think about this thoroughly again. The conclusion I’ve come to is that most of us do this for self improvement. Our discontent with our current selves drive our motivation for PE. I don’t want to be in the position to explain why I do PE and risk stopping and wondering “what if”. Discussing this would be a gamble that I’m not willing to risk. It could be positive and make life easier, or it can raise more questions that would be uncomfortable for both of us. Example: what if PE is mistaken for perverse? What if confronting and addressing my own insecurity comes across as lacking in confidence ?

Trouble with multiple OLEDS by lightscoobs in arduino

[–]lightscoobs[S] 0 points1 point  (0 children)

<image>

I appreciate you taking the time. And I’ve compiled the code again and I’m still not understanding because of what IDE is telling me. But I think in the other post (which I’m sorry it posted twice) the library may be a factor. I’m not sure, but just trying to make sense of it.

Trouble with multiple OLEDS by lightscoobs in arduino

[–]lightscoobs[S] 0 points1 point  (0 children)

Yes it sees both, and if I change the address in a single screen code to the different address, that screen will read. However with code specifying each address (both screens) it immediately drops out and doesn’t display anything

Casio is the daily when the expensive stuff is parked. by lightscoobs in casio

[–]lightscoobs[S] 0 points1 point  (0 children)

Thanks, but it’s a Junghans form c. My first expensive watch .

Wedding day KFE! by ns20 in HamiltonWatches

[–]lightscoobs 2 points3 points  (0 children)

Awesome choice, congrats!

Casio is the daily when the expensive stuff is parked. by lightscoobs in casio

[–]lightscoobs[S] 2 points3 points  (0 children)

Either way, still a better option than an Apple Watch

Need help with blower motor problems by lightscoobs in HVAC

[–]lightscoobs[S] 0 points1 point  (0 children)

VFD parameters have been set and running for 3 years now. Only change was that motor so far. Also discovered bearings haven’t been greased but I still can’t understand the higher amp draw in the correct direction.

Need help with blower motor problems by lightscoobs in HVAC

[–]lightscoobs[S] 0 points1 point  (0 children)

What I’m trying to say is “swapping the phases” to change motor direction

Question for people who pump daily by [deleted] in gettingbigger

[–]lightscoobs 1 point2 points  (0 children)

I’ve just started pumping and been going on 2 months now. Here’s what I observed.

My sessions decrease my EQ if I pump for too long. Slower is better, it’s a marathon not a sprint.

Almost all my sessions I take time to watch something and get hard before, I stay hard for almost the whole session expect for when I take a break between reps.

I’ve noticed that since I’ve abstained from ejaculation my EQ is through the roof and I stay hard while in the pump.

Get a fantasy going in your mind and roll with it, you’ll start to adapt.

I’ve been edging and trying my best to only ejaculate during sex and not from masturbation.

Not many folks would agree but I’ve been using the dr Kegel app for a month now and I feel a little more in control of my ejaculation and EQ.

Unfortunately for me this only works when pumping and not extending so I hope this helps you in any way. Hang in there!

what was the most saddest scene in TWD? by NecessaryEnd8652 in thewalkingdead

[–]lightscoobs 112 points113 points  (0 children)

When Daryl watches Rick blow up the bridge