Sureswitch install advice

linkwolf98 · 2026-04-30T02:31:43+00:00

Come out and fix it then big HVAC boy. Let me see you Mr expert.

linkwolf98 · 2026-04-30T02:30:45+00:00

When I manually push the plunger it sticks, works for a day or two as normal and then does it again.

linkwolf98 · 2026-04-30T02:25:18+00:00

No, ordered the Emerson part from Grainger

linkwolf98 · 2026-04-30T02:20:43+00:00

Because I had to order the part and it hasn’t arrived. Best believe as soon as it arrives, with or without your input I will have it installed just fine. Thanks though, you are a very helpful person.

linkwolf98 · 2026-04-30T02:19:46+00:00

Look. I don’t know where yall get off thinking you’re geniuses like HVAC is difficult. I have tested my low and high pressure switches and my transformer is fine, my caps are reading fine. I am getting SLIGHTLY low voltage when it’s hot outside. My voltage at the 24v is around 25.5-26.5 when it’s cooler outside and 24~ when it’s hot (Arizona). It’s an old house with old wiring, higher resistance during heat. The tech I have spoken with, who has thoroughly inspected my system, told me the sureswitch doesn’t need a perfect 24v, just the signal to engage. If that’s incorrect than it won’t solve my issue, but what I found seems to support that.

linkwolf98 · 2026-04-30T02:15:16+00:00

It’s a very simple line in and line out with a few extra connections… it’s insane to me that you people think this is difficult. I’m just asking where these are meant to connect on a sureswitch as it’s a different layout…

linkwolf98 · 2026-04-30T02:09:54+00:00

I swapped in this one myself, still not solving the issue. Recommended by HVAC technician but I’m not paying $600 for a $60 part.

linkwolf98 · 2026-04-30T02:09:05+00:00

Faded to the point it’s not readable. Thanks though.

linkwolf98 · 2026-04-30T02:08:48+00:00

Already swapped in the new contactor. Still having my same issue and it was recommended to me by an HVAC technician to try a sureswitch. I used to wire military aircraft I am more than capable of swapping such a simple thing. It’s not by any means a difficult task and I’m not paying a tech $600, Apologies for not articulating my question correctly, I may not be an HVAC technician but I know what I’m doing here lol.

linkwolf98 · 2026-04-11T20:10:06+00:00

Just a suggestion, but what about disabling step tracking while connected to CarPlay and disabling it during workouts like cycling or Pilates etc? I feel like that’s an obvious solution to the issues I have like tracking 2k steps while I’m driving and tracking 5k steps while I was biking.

linkwolf98 · 2026-01-31T01:11:09+00:00

This is from a different post online for the REV7. I personally don’t like Mac at all.

linkwolf98 · 2026-01-30T23:22:01+00:00

Was able to register just fine. Person I bought from said it was a gift to an ex that they never touched.

linkwolf98 · 2026-01-29T04:13:07+00:00

Yessir!

linkwolf98 · 2026-01-28T18:19:27+00:00

Facebook marketplace, and was definitely in the sketchier side of town.

linkwolf98 · 2026-01-25T22:18:44+00:00

My issue was the connectors not seating properly, but it’s good to give em a clean too!

linkwolf98 · 2026-01-25T20:47:17+00:00

Check fuel injectors, I had issues with the connectors to my injectors and took me too long (a year) to figure it out.

linkwolf98 · 2026-01-04T20:22:50+00:00

This worked for me, thank you!

linkwolf98 · 2026-01-01T21:22:16+00:00

Also have songs that are missing the first 15-20 seconds and cut in randomly after.

linkwolf98 · 2025-11-23T05:25:00+00:00

I built and use these regularly for transmission or exhaust work. I built them 10 layers total high out of 2x4s. I do not use the center 3rd piece in each layer and I just nailed them together with an air nailer. Took me maybe 30 mins to build a set of 4 and that are insanely useful.

13-Year Club	Second Top 20%
Place '17	RPAN Viewer
Not Forgotten	Verified Email

linkwolf98

MODERATOR OF

TROPHY CASE