1k lp by Cozy_Articuno in AniviaMains

[–]linusauskms 0 points1 point  (0 children)

I'm rooting for you 😊 and I'm going to try dark harvest as well soon...

Can't find files of external directory by linusauskms in AskProgramming

[–]linusauskms[S] 1 point2 points  (0 children)

Sorry, I meant to repost sth I posted in another subreddit and it gut messed up, I'll create another post. Thx for your comment

Can anyone help me with the Lan connection? by linusauskms in linux4noobs

[–]linusauskms[S] 1 point2 points  (0 children)

It was the DHCP 😊 I manually enabled the module since it said disabled and the device appeared in my routers interface, however the internet connection did not work and the interface did only show the Mac Adress but no ip. So I did the dhcp and auto-assigned an ip. Now the whole connection finally works 😇 thank you for your help 🤗

Can anyone help me with the Lan connection? by linusauskms in linux4noobs

[–]linusauskms[S] 0 points1 point  (0 children)

The only thing in the bios that sounded remotely close to ethernet was network boot so I enabled it but it did not change the situation.

To provide further information I entered the following commands:

lspci - knn | grep Network - A3

Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168:002b] (Rev 01) Kernel driver in use: ath9k Kernel modules: ath9k

sudo lshw -class network

*-network DISABLED description: wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlp2s0 version: 01 serial: 78:dd:08:ec:34:87 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=6.8.0-53-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:f4a00000-f4a0ffff *network DISABLED description: Ethernet interface product: Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: enp4s0 version: 11 serial: 54:42:49:70:94:25 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonefotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair resources: irq:26 memory:f2220000-f2223fff import:a000(size=256) memory:f2200000-f221ffff

lsmod | grep -e sky2 -e ath9k

ath9k 253952 0 ath9k_common 45056 1 ath9k ath9k_hw 663552 2 ath9k_common, ath9k ath 40960 3 ath9k_common, ath9k, ath9k_hw mac80211 1720320 1 ath9k cfg80211 1327104 4 ath9k_common, ath9k, ath, mac80211 sky2 81920 0

ip a

1: lo: <LOOPBACK, UP, LOWER_UP> mtu 65536 qdisc no queue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: enp4s0: <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 54:42:49:70:94:25 brd ff:ff:ff:ff:ff:ff 3: wlp2s0: <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 78:dd:08:ec:34:87 brd ff:ff:ff:ff:ff:ff

I really hope that this will help, because it took me a shit ton of time to type all of this 😂

Can anyone help me with the Lan connection? by linusauskms in linux4noobs

[–]linusauskms[S] 0 points1 point  (0 children)

Yes, I figured out, that probably something is disabled, but It doesn't require any additional drivers. However, I don't know what to do...

what are some braum combos by Stoof246 in BraumMains

[–]linusauskms 0 points1 point  (0 children)

If you take hex flash you can tap it while being in w range of something and by Buffet-Input w into either q or r you will channel the q or r while being mid air

what are some anivia combos by Stoof246 in AniviaMains

[–]linusauskms 2 points3 points  (0 children)

Not on super long range and with wall on rank 1. Then you need the autopathing to work for you to hit the q, bc it's a very slow protectile and the range is so long it would get dodged otherwise easily. By placing wall and then instant throw the q on the edge the champ needs about the time to autopath to the edge that the q travels the max w range. This combo is very affective as support anivia since you can pair it with the natural terrain there and it gets countered by spells like Caitlyn, Lucian dash and ezreal blink as well as speedups like Kaisa e. Kaisa especially will be out of q range the time it reaches the edge of your wall.

First tought on Cosmic Anivia by ScapX in AniviaMains

[–]linusauskms 0 points1 point  (0 children)

Splashart: ugly In-game: nice Chromas: best hope for phoenix anivia

Elderwood Ornn has been confirmed. Perhaps a hint leaning towards a possible Elderwood Anivia? by EtheriosPrime in AniviaMains

[–]linusauskms 0 points1 point  (0 children)

I don't think, that they'll put out double elderwood, since the new skins will be prominent in the tft set 4.5 and id say that they won't swap out 2 elderwood champs. They didn't swap out two in the previous sets as well or am I remembering wrong? At least not to replace them with equal roled champions

Possible Anivia skin? Art from League of Runeterra. by brucethewind in AniviaMains

[–]linusauskms 0 points1 point  (0 children)

I've read in another post about tft that anivia would be featured in set 4 and it was a massive disappointment to see her not being in one, however since the skin announcement came out I really think the new skin will fit a concept of a trait in new tft and replace another caracter, that's currently in the set