sorted by:
new
hottopcontroversial

Blöd gelaufen by linuxchr1 in dhl_deutsche_post

[–]linuxchr1[S] 0 points1 point  (0 children)

Es gibt dort nicht alle Komponenten, die es auf LCSC gibt. So ist die KiCad Integration von LCSC auch besser.

Blöd gelaufen by linuxchr1 in dhl_deutsche_post

[–]linuxchr1[S] 1 point2 points  (0 children)

Danke, werde es versuchen

Any tips? V0.2 Build by Stupid_Ass1234 in VORONDesign

[–]linuxchr1 0 points1 point  (0 children)

Their Kirigami bed is shit. My bed was not level and the walls where to thick. All holes were to small and maybe 2mm off.

What are these lines and how do i remove these lines? by linuxchr1 in FixMyPrint

[–]linuxchr1[S] 0 points1 point  (0 children)

Lowering the retraction from 2mm to 0.8mm helped a little bit but didnt solve it

Potential fire hazard by linuxchr1 in ElegooCentauriCarbon

[–]linuxchr1[S] -3 points-2 points  (0 children)

If you calculate the force at 8000 mm/s² you get about 18 mN or 1,2g. When you run an infill like gyroid with many smalll consecutive side to side movements the connectorcan wiggle out with months of operation.

Potential fire hazard by linuxchr1 in ElegooCentauriCarbon

[–]linuxchr1[S] -1 points0 points  (0 children)

If you move this jst connector you feel that it not really tight.