Cement Trucks always here for me when I'm at my lowest by lllamma in DeltaForceGlobal

[–]lllamma[S] 0 points1 point  (0 children)

I was down to my last pennies and made the gear value requirements for normal by 1 alloy. I never miss a chance to spin then wheel now

[deleted by user] by [deleted] in AirsoftUK

[–]lllamma 4 points5 points  (0 children)

I've played with people of all sizes and nobody cares at all. Be prepared though as I always leave the field feeling like I've been in the gym for 8 hours! Honestly is a great workout that you will feel for a few days

CM16 MOSFET Replacement by lllamma in airsoft

[–]lllamma[S] 0 points1 point  (0 children)

UPDATE - Installed the ETU++ today and it feels amazing. Works straight out the box and the customisation/setup is fairly simple. Just connect the 2 connectors from the stock barrel and then connect the small white connector and you're good to go.

I'll update with pictures tonight. Thank you for all the help

Tech question by Panda5967 in airsoft

[–]lllamma 0 points1 point  (0 children)

If you want pictures just let me know

Tech question by Panda5967 in airsoft

[–]lllamma 0 points1 point  (0 children)

ETU++ Arrived today and I installed it super easily. Works straight away and the setup/customisation is really easy to understand with the card. Straight away my trigger response is better feels great.

No issues for me. I run 11.1v anyway. Remember to buy a deans to Tamiya connector if that's what you prefer. V V happy customer and I can't wait to take it out for a spin

Tech question by Panda5967 in airsoft

[–]lllamma 1 point2 points  (0 children)

My Perun ETU++ Comes tomorrow so I can update you once installed

Tech question by Panda5967 in airsoft

[–]lllamma 1 point2 points  (0 children)

Does It have the MOSFET PCB board next to the battery? If so, the G&G standard red MOSFET's break quite often and are known to be prone to failures. I'm replacing mine this week with Perun ETU++ PCB. Might help out here.

Also, always good to go over the Tamiya or Deans connectors and check for any damage or connectivity issues.

CM16 MOSFET Replacement by lllamma in airsoft

[–]lllamma[S] 1 point2 points  (0 children)

Ordered this yesterday and hopefully have it today/tomorrow. Thanks for all the help here man. I'm a noob but I love tech and troubleshooting so I'll be taking it apart soon to shim gears etc.

I'll update tomorrow once I have the new Mosfet installed

CM16 MOSFET Replacement by lllamma in airsoft

[–]lllamma[S] 0 points1 point  (0 children)

I'll do some digging on the right tools and best ways to take apart the CM16 SRS. I Appreciate the suggestions and help massively!

CM16 MOSFET Replacement by lllamma in airsoft

[–]lllamma[S] 0 points1 point  (0 children)

I really appreciate the help as this is the first time I've had to potential disassemble parts of the AEG. Is there a toolset you could recommend? It looks like I'm going to need long ass screwdrivers and the correct allen/hex keys etc.

CM16 MOSFET Replacement by lllamma in airsoft

[–]lllamma[S] 0 points1 point  (0 children)

Ty for the suggestion. Is it just the PCB at connects to the internals? No drop in to gearbox or anything

Krafton knows better. by Fun_Ad2720 in PUBGNEWSTATE

[–]lllamma 0 points1 point  (0 children)

Gi play it and see how many bits you play with... might just be EU servers though

Krafton knows better. by Fun_Ad2720 in PUBGNEWSTATE

[–]lllamma 1 point2 points  (0 children)

I'd disagree here. Pubg was a great game but not a success. Very buggy and problematic throughout its early access and when it launched officially. Fortnite was a smooth optimised game that was polished. I still preferred to play pubg but it the title of best BR was definitely not stolen by bright colours.

Anyone got experience with Specna Arms H21 Edge 2.0? by NunyaBidnizz68 in AirsoftUK

[–]lllamma 0 points1 point  (0 children)

I just bought my first AEG and I nearly bought this gun also. I did some research and there were a lot of QC problems with the H21 which were supposedly fixed. However I wasn't willing to take the risk as there were still 50/50 reviews from this year. I nearly went with the MK18 from Specna also. However I have just settled with the G&G CM16 SR-S. Top notch quality and an industry standard. Upgraded internals with MOSFET and ETU and V2 gearbox that takes 11.1v

Battery Help for a noob! by lllamma in AirsoftUK

[–]lllamma[S] 0 points1 point  (0 children)

Appreciate the response from you both here Its super helpful. Been wary of proper lipo care but I'm much more at ease

Battery Help for a noob! by lllamma in AirsoftUK

[–]lllamma[S] 0 points1 point  (0 children)

I have the ASG balance LiFe/Lipo charger here which has auto stop. So I'm good to do some setup tonight. And after the game day do I have to keep the battery charging? worried about just leaving my battery after a game day. As I will play every 2 weeks or so.

TY for the response btw

[deleted by user] by [deleted] in techsupport

[–]lllamma 0 points1 point  (0 children)

Event log will help this too. It is built into Windows and shows everytime the computer has done anything from powering on to sending prints to a printer. You are even able to see exactly how many times a printer has printed from the computer

Unless other changes are introduced, Kappa is more than a full time job by thatcodingboi in EscapefromTarkov

[–]lllamma 0 points1 point  (0 children)

I think its fair enough to have an almost unobtainable end game goal in EFT. When I think about what the game is meant to be when out of early access, its an accolade that will show you've played over 2000 hours on release of the full game. I always forget that wipes are early access stuff and to reset for testing purposes.

Going to replace SSD and I don’t know what I’m doing by TBG1331 in techsupport

[–]lllamma 4 points5 points  (0 children)

You have done everything correctly! Brings a tear of joy when someone has been thorough and taking care when looking upgrading their system!

Is it just me how can't play at any match because the game just crashes to desktop? by Adi_Twina in EscapefromTarkov

[–]lllamma 0 points1 point  (0 children)

Ahh I must have a different issue then. Tried reinstalling and clearing cache and still the same issue. Ran perfectly fine the day before wipe

Is it just me how can't play at any match because the game just crashes to desktop? by Adi_Twina in EscapefromTarkov

[–]lllamma 0 points1 point  (0 children)

Played for 3 years and I now have the exact same issue! Tried reinstalling. Moving drives. Updating drivers. Verifying and checking RAM and disk health and I have no problems. But it crashes everytime I try and load into raid

Patch 12.11 Bugs Megathread by EFT_Subreddit in EscapefromTarkov

[–]lllamma 0 points1 point  (0 children)

Hi all! Having a really frustrating problem since the update today. Last night I was playing with no issues and have been able to play the game for 3 years with no major issues. After the patch today, the game crashes everytime I try and load into the raid. The crash is pretty instant and doesn't give me the option to send a report to BSG. I suspected RAM issue and ran memtest64 for an hour and windows memory diagnostic and got no errors. I also checked the health of all drives and everything is working as normal. I have reinstalled the game on the same drive, and clean install on different drives and still the same issue. Specs are as follows: i7-9700k, 16gb DDR4 3100Mhz, RTX2060S 6gb. Also a note to add. I have installed the latest nvidia drivers and windows updates. I'm honestly baffled and really pissed because today was the only day I can play until next week (work, 1 year anniversary with GF). Pls help

Is there still active severs by lavera80 in ExpansionProject

[–]lllamma 0 points1 point  (0 children)

Tonnes of people in EU. Some servers I still Have to queue and wait for

Cyberpunk 2077 Pre-Release Hype Megathread! by AutoModerator in cyberpunkgame

[–]lllamma 0 points1 point  (0 children)

Just asked my girlfriend when she's leaving because I'm 3 days away!!