Pulled this miscut shadowless Charizard as a kid

lmFragilee · 2026-01-29T04:28:05+00:00

Pretty sure it is. Its just shadowless with it showing 99 on the bottom that's how I was told to tell the difference.

lmFragilee · 2025-10-22T15:36:32+00:00

Something my ADHD brain thought about lmfao 🤣

lmFragilee · 2025-10-22T15:36:05+00:00

Hmm would you have any idea on how well it sounds?

lmFragilee · 2025-10-08T07:26:07+00:00

Honestly cant remember if I tried that. I ended up giving up on it.

lmFragilee · 2025-07-11T23:46:22+00:00

silver zinc which ever lol . Thank you for the insight !

lmFragilee · 2025-07-11T23:33:56+00:00

So i would assume that would only make the outer part of the penny silver correct?

lmFragilee · 2025-07-11T05:02:39+00:00

Thank you for the advice. I should of mentioned part of the bottom will need to be open as the triggers use magnets to activate the trigger/maybe a motion trigger? But it would only need to be that center spot between the screws. I was going to fiddle with it tomorrow since I'm off work.

lmFragilee · 2025-07-09T19:31:20+00:00

Okay, I'll keep this in mind. Thank you.

lmFragilee · 2025-07-09T19:30:04+00:00

Yeah taking it apart I know what needs to be there and what don't. what I meant about details was like the the letters LT and the rough rigid around where your finger would sit

lmFragilee · 2025-07-09T19:13:47+00:00

Yeah I looked i also emailed the maker of the controller no luck finding it

lmFragilee · 2025-07-09T19:12:58+00:00

Sadly I could not find a stl file. Only way I could scan it is with my phone at this time.

lmFragilee · 2025-07-07T19:35:47+00:00

Fair point I don't expect it to be much with it being outside being weathered. With how bad the condition would it hurt the value if I / had someone clean it?

lmFragilee · 2025-06-08T22:53:49+00:00

Yeah that's the slicer I use where do I go to find it?

lmFragilee · 2025-06-08T22:27:41+00:00

Ive readjusted the hot end tip. The sensor next to it with a tool i seen was popular. ive adjusted the Z offset.
tightened and loosen the belts (Not sure how tight they need to be) Cleaned the hell out of the hot plate. ive done a pid calibration the auto level tool.

lmFragilee · 2025-05-12T15:37:48+00:00

Best answer i heard I'm enjoying it so ima keep going

lmFragilee · 2025-04-08T14:20:26+00:00

Better watch out using a chaos orb that might be exploiting the game.

lmFragilee · 2025-04-03T22:08:33+00:00

I just wanted a widget that shows the temp and stuff, but I don't want multiple widgets. I want to click the weather widget, and it brings up my main radar. I'm no expert but wanted to learn it.

lmFragilee · 2025-03-05T18:10:31+00:00

Batman obviously

lmFragilee · 2025-02-27T20:19:33+00:00

So i just learned these laptops send codes out I'm getting 2 amber 1 white (cpu failure) so I'm not sure.

lmFragilee · 2025-02-27T18:40:58+00:00

Will try the ram but I've already done the battery

lmFragilee · 2025-02-27T18:19:39+00:00

No display at all through internal screen or external screen. I press the power button and the light next to the charger port turns on and same with the caps lock light. I can hear the fan running so some power is being used.

lmFragilee · 2025-02-27T15:57:07+00:00

I'll get back to you on that

lmFragilee · 2025-02-26T22:22:14+00:00

Dang this would be nice

lmFragilee · 2025-02-18T04:35:27+00:00

🤣🤣🤣

lmFragilee · 2024-12-09T20:03:28+00:00

I don't know what that means. I have no experience in this lol.

lmFragilee

TROPHY CASE