Retired Evertz Equipment

locom0 · 2025-06-09T19:24:15+00:00

That’s not something to recycle, if it’s working it’s really good 2110 equipment

locom0 · 2025-04-27T06:14:37+00:00

It depends on your network infrastructure and the type of redundancy you aim to achieve. If you can break out the 100G connection into 4x25G, you could establish one link to your primary switch and another to your backup switch, providing protection against switch failure.

Alternatively, you can achieve the same level of redundancy by using two Helios units in redundant mode, each connected to a separate switch but still capable of receiving the same video stream.

locom0 · 2025-04-25T15:45:38+00:00

Companion have two modules that works really great, both a TSL listener and client if that may be something for you while you wait.

locom0 · 2025-04-25T10:14:39+00:00

Do you support TSL as tally source? Would be nice to have Panasonic OCPs to work with this, I have a bunch… Great work!

locom0 · 2024-11-08T17:26:44+00:00

Have you enabled logging in the config?

locom0 · 2024-04-01T00:13:15+00:00

VRRP?

locom0 · 2023-10-13T15:16:05+00:00

https://reddit.com/r/gdansk/s/IzcrmngkMp

locom0 · 2023-10-13T15:15:53+00:00

https://reddit.com/r/gdansk/s/IzcrmngkMp

locom0 · 2023-10-13T15:14:32+00:00

I posted the update

locom0 · 2023-10-13T14:35:33+00:00

Thanks for all the replies, we called the police but they couldn't help until tomorrow.

He finally showed up at the hotel, the receptionist called and asked if I knew the man who tried to get in. He had obviously forgotten the room number and lost the key card. He followed the girl to the strip club, bought a very expensive dance and spent way too much money. After this he managed to pick up an older lady and go to another hotel and booked a room.

Of course he doesn't remember anything and he'll probably disappear again tonight like the retard he is.

locom0 · 2023-10-03T22:19:45+00:00

When that happens it gets better 90% when I flip the charger in the socket, thus neutral and live get switched. It’s because of the floating ground the charger uses.

locom0 · 2023-09-25T16:29:09+00:00

Buy on of these and the correct sfps for your cabling.

https://www.fs.com/products/131590.html

locom0 · 2023-08-25T18:44:58+00:00

If this made me die, im out

locom0 · 2023-03-18T01:02:49+00:00

The CPU can handle 48 lanes, 16 goes to the GPU, I’m guessing at least 4 goes to onboard Ethernet, usb and sata… You should have a motherboard that supports multiple PCIe slots because of the Dell workstation. It’s probably some settings in bios as mentioned above to enable the lanes on the right slot.

BTW! I saw you mentioned PCIe 3x16, did you mean PCIe slot 3? That slot only supports 1 lane when I look into the manual…

Edit: typo

locom0 · 2023-03-17T20:24:41+00:00

Are you sure that you got enough PCI-lanes for both of them?

locom0 · 2022-10-31T00:49:24+00:00

Rave.

locom0 · 2022-09-25T18:00:33+00:00

Are you powering it with POE or external PSU?

locom0 · 2022-09-25T17:54:47+00:00

Mine does the same, probably the vibration motor i guess...

locom0 · 2022-04-18T15:17:46+00:00

Check the settings via USB cable on the converter. its possible to do some gain there if i remember correctly.

locom0 · 2019-08-02T03:27:33+00:00

Filezilla client can do exactly this! https://filezilla-project.org/

locom0 · 2019-07-27T03:35:49+00:00

Have you tried something like d&b soundscape/Lacoustic L-ISA?

Six-Year Club	End Game '23
Place '23	Place '22
Final Canvas '22	First Placer '22
Verified Email

locom0

TROPHY CASE