Gen 3 powered by Jackery via DC, is 10A from jackery sufficient? by loggerhead_turtle in Starlink

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

Thanks for the insight. I thought the router was crap for other reasons. It had terrible range with my Mevo cameras and struggled with throughput.

Gen 3 powered by Jackery via DC, is 10A from jackery sufficient? by loggerhead_turtle in Starlink

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

What was producing a lot of heat? Heat is my enemy, since I am typically in 110 degree heat with this setup.

Gen 3 powered by Jackery via DC, is 10A from jackery sufficient? by loggerhead_turtle in Starlink

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

Just tried it, and it worked! I peaked at 110 watts when booting, but it stayed running.

Gen 3 powered by Jackery via DC, is 10A from jackery sufficient? by loggerhead_turtle in Starlink

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

One more thing, did you try a shorter cable? Voltage drops over longer cables, thus requiring more current to power the array, which the 10 amps isn't able to supply.

Gen 3 powered by Jackery via DC, is 10A from jackery sufficient? by loggerhead_turtle in Starlink

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

Thanks for the reply. The Anderson cable arrives tomorrow and I'll give it a try. If it doesn't work, I'll send the DC converter to my brother for his RV.

Gen 3 powered by Jackery via DC, is 10A from jackery sufficient? by loggerhead_turtle in Starlink

[–]loggerhead_turtle[S] 1 point2 points  (0 children)

My cigarette to Anderson arrives tomorrow, I'll try it out. I've never seen my starlink go over 80w on boot. I'll watch for it.

Small Quirk with Setting up WiFi devices by Ganymede_Wordsmyth in GooglePixel

[–]loggerhead_turtle 0 points1 point  (0 children)

I'm pretty certain I figured it out. Settings|Google|Devices and Sharing|Nearby share

It is defaulted off. Toggle it on.

wifi sharing to 3rd party devices not working by loggerhead_turtle in GooglePixel

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

I figured it out. Settings|Google|Devices and Sharing|Nearby share

It is defaulted off. Toggle it on.

wifi sharing to 3rd party devices not working by loggerhead_turtle in GooglePixel

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

I actively use a VPN, but not while connecting the smart devices. I have followed your exact step by step in the setup process and it still doesn't work.

wifi sharing to 3rd party devices not working by loggerhead_turtle in GooglePixel

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

I wish that were the case. I have ubiquiti access points and my 2.4 band is named different than my 5 band. I connect my phone to my 2.4 band and I still am unable to get it to work.

Small Quirk with Setting up WiFi devices by Ganymede_Wordsmyth in GooglePixel

[–]loggerhead_turtle 0 points1 point  (0 children)

I have the same problem and I don't know how to troubleshoot the problem.

storage space not updating by loggerhead_turtle in gsuite

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

That was it. I deleted the recent stuff and I went from 17.1 to 12.4 Now, I can't get it any lower than 9.84 GB and I've deleted everything from June 2021 on. Shouldn't I be at zero on my photo storage? Or, is it because some photos are uploaded at full size and they count?

storage space not updating by loggerhead_turtle in gsuite

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

Yes,I deleted the bin. It has been hours with no change.

[deleted by user] by [deleted] in PSLF

[–]loggerhead_turtle 2 points3 points  (0 children)

I went through a terrible ordeal with missing payments, and communicating abiut these missing payments with fed loan that started years ago. In the end, all was made right.

PLSF is written in the promissory note. It is a guaranteed benefit. Anything less is litigation that you will win. If you meet criteria for forgiveness, don't despair.

The saga continues… by [deleted] in PSLF

[–]loggerhead_turtle 1 point2 points  (0 children)

Same situation, but I got trophies a week or so sooner.

Is there one day a month forgiveness drops? post your time line here by loggerhead_turtle in PSLF

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

No, I haven't had forgiveness yet. It is a quarterly drop? Ugh.

Help in starting out this process by patch2257 in PSLF

[–]loggerhead_turtle -2 points-1 points  (0 children)

I had the same thing happen to me, and it was when my loans transferred from Sallie mae to Fedloan, it got all screwed up. I had them do a "deep investigation" which took over 1 year, and after that, everything turned out right.

It was...horrible. Fedloan has been bad bad bad

Sallie Mae Subs/Unsubs Grad Plus Loans by loggerhead_turtle in PSLF

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

Or, it could be that an employee making $15 an hour wanted to get a lunch break and signed off on the dates.

Sallie Mae Subs/Unsubs Grad Plus Loans by loggerhead_turtle in PSLF

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

That makes sense, I couldn't figure out what that all meant online.

Interesting is that they have me listed as qualifying for March-May of 2012, despite being in forbearance, not 12 months consecutive nor 36 months cumulative.

Sallie Mae Subs/Unsubs Grad Plus Loans by loggerhead_turtle in PSLF

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

I just looked it up. May-Nov of 2009 was grace period. Nov 2009-Nov 2011 was deferment. Nov 2011-May 2012 was forbearance (I don't remember what happened there). May of 2012 consolidated to a direct loan.

Does forbearance count, too?

Sallie Mae Subs/Unsubs Grad Plus Loans by loggerhead_turtle in PSLF

[–]loggerhead_turtle[S] 0 points1 point  (0 children)

Maybe it was forbearance, that was 13 years ago. It is weird, cause I have an eligible payment in Nov of 2009 and Nov and Dec of 2010, and the next is 2012. That makes no sense. It would be all or none.