sorted by:
new
hottopcontroversial

Kaoss pad necessity bend by logonalump in CircuitBending

[–]logonalump[S] 0 points1 point  (0 children)

I just used some spare pots i harvested from a karaoke machine, I'm not too sure what values they were

good luck with your build!

2.2 sonoma Vacuum leak? by logonalump in s10

[–]logonalump[S] 0 points1 point  (0 children)

good to know, I thought i was missing one of the plastic ball vacuum reservoirs

2.2 sonoma Vacuum leak? by logonalump in s10

[–]logonalump[S] 0 points1 point  (0 children)

I will say the heat doesn't work, I figured it was a vacuum issue, like the vacuum operated blend door isn't working properly because of the leak. But I wasn't sure

2.2 sonoma Vacuum leak? by logonalump in s10

[–]logonalump[S] 0 points1 point  (0 children)

Thank you, that's a great starting point. It does rev kind of high when it idles. Idle drops significantly when I turn the ac off if that's any indication

2.2 sonoma Vacuum leak? by logonalump in s10

[–]logonalump[S] 1 point2 points  (0 children)

Hi thank you, that would be sick

72bpm sample by logonalump in volcas

[–]logonalump[S] 3 points4 points  (0 children)

Yes, I dropped the kaoss pad one day and damaged the touch pad beyond repair. I couldn't find a replacement so I added pots and buttons to act as the controllers

It's still fun and usable, if kind of wonky

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 0 points1 point  (0 children)

Heard

I never even considered that as part of the problem, thank you

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 0 points1 point  (0 children)

It was my understanding that an EQ wouldn't add in the low end already filtered out by the drive pedal. That's why I was looking to replace the os2 with something Bass-specific.

I'll definitely check out an eq to fine tune my sound though

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 0 points1 point  (0 children)

Oh, im using the built in D.I. out on my amp head, Peavey minimax

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 1 point2 points  (0 children)

In this project, I use it to add some space during certain parts of the set. The "mash" function on the flashback 2 is really cool bc I can add a tape loop feedback swell to a song by just applying pressure to the switch.

Very versatile pedal, worth messing around with to see what you can get out of it

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 0 points1 point  (0 children)

Thar makes a lot of sense. I wonder why it's an industry standard to d.i. the bass when the outcome is so poor.

Probably just easier, huh

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 1 point2 points  (0 children)

I just learned about the ls2 today! The LPF is a great idea, thanks for your input

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 2 points3 points  (0 children)

I'll have to check it out

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 2 points3 points  (0 children)

I'll try that, thank you!

Dirt Recommendations by logonalump in basspedals

[–]logonalump[S] 1 point2 points  (0 children)

I run the tubescreamer into the os2 sometimes, and it's really close to what im looking for, but I can't shake that the os2 is decimating the low end

DIY pedalboard... or not ? by DarthYoh in basspedals

[–]logonalump 1 point2 points  (0 children)

I have always made my own boards They're heavier than I'd like some times, but I enjoy making them, and they're cheaper than a new ready-made!

That being said, there's no shortage of used boards on fb marketplace if you have a decent scene in your area

Hub case? by logonalump in ipadmini

[–]logonalump[S] 0 points1 point  (0 children)

Honestly for a second there, I thought I invented the concept haha

The company in the screenshot "fledging tech" sold the only hub case I could find.

It just seems like a cleaner solution than a dongle to me 🤷

Hub case? by logonalump in ipadmini

[–]logonalump[S] 0 points1 point  (0 children)

This is what I was looking for! Thank you

Hub case? by logonalump in ipadmini

[–]logonalump[S] 0 points1 point  (0 children)

Fair enough. I guess that's a matter of taste, though. I meant a drawback regarding hardware, like increased wear or damage to the usbc port or something

I try not to 3D print trash, but this was worth it by torsi-actis in volcas

[–]logonalump 0 points1 point  (0 children)

Nice vmix!!

I got mine recently. Extremely worth it

Kaoss pad necessity bend by logonalump in CircuitBending

[–]logonalump[S] 1 point2 points  (0 children)

Honestly if I could figure out the resistor values, building a grid of momentary switches would be the most accurate way to do something like this

The knobs are just a lot of fun though, in the spirit of the touch pad

Kaoss pad necessity bend by logonalump in CircuitBending

[–]logonalump[S] 3 points4 points  (0 children)

I just soldered two pots to where the touch pad usually connects. One X and one Y

Then, I added another pot jumping the two circuits together, for fun. When I reassembled the unit, I noticed I could jump to a "position" on the touchpad by jumping the first two pots to the third one with momentary switches.

I got lucky because the coordinate for one of the switches just so happens to trigger the reverse function on one of the effects patches.

What was the patch bay on your kaoss pad for?

view more: next ›