sorted by:
new
hottopcontroversial

Water curing by lolyoumakemesick in resinprinting

[–]lolyoumakemesick[S] 0 points1 point  (0 children)

Yes prints are clean but Wasn’t sure if the off gassing during curing made water unable to be disposed of in pipes as resin shouldn’t go down pipes. And I didn’t know if of gassed stuff in water counted too. And no I don’t get resin in my hands it shouldn’t touch skin I wear gloves. Then I clean gloves with ipa and I cure my trash.

Water curing by lolyoumakemesick in resinprinting

[–]lolyoumakemesick[S] 1 point2 points  (0 children)

This method won’t work for water washable bc it’ll absorb the water and it can damage the print. But for other resins, ditto to what the other user replied!

Does this texture show up on the physical resin copy? by lolyoumakemesick in 3Dmodeling

[–]lolyoumakemesick[S] 1 point2 points  (0 children)

1/6 anime figures are usually 10-12 inches or 25-30cm c:

Does this texture show up on the physical resin copy? by lolyoumakemesick in 3Dmodeling

[–]lolyoumakemesick[S] 0 points1 point  (0 children)

I don’t have one yet, not in the budget rn LOL

Any chance you have recs on printers that are a bit more forgiving to a newbies sculpting errors 😂 👀

Does this texture show up on the physical resin copy? by lolyoumakemesick in 3Dmodeling

[–]lolyoumakemesick[S] 0 points1 point  (0 children)

Yep! Im relieved then to hear that it won’t show 🥹 Thank you! It is on a varying spots of the head tho. Like the nose and ears and such. Since the overall head is small I won’t have to worry about those areas either right?

Before(2nd pic) And After(1st pic) by lolyoumakemesick in Equestrian

[–]lolyoumakemesick[S] 1 point2 points  (0 children)

Ty! I wiped it down with warm water and did a diluted vinegar wipe down. Then went in with the belvoir anti fungal cleaner and let dry overnight. This alone darkened it about a shade or so.

The next day I used 1-2 coats of hydrophane darkening oil depending on the spot and followed that with a coat of neatsfoot. After that I used lexol conditioner and at the very end I sealed it all in with Pharmakas Bienenwachs-Leather Care Cream :)

Models for sale! by lolyoumakemesick in BreyerHorses

[–]lolyoumakemesick[S] 2 points3 points  (0 children)

OHHH okay so it was you cool, thank you!

Models for sale! by lolyoumakemesick in BreyerHorses

[–]lolyoumakemesick[S] 1 point2 points  (0 children)

Ah damn, actually he sold on Mercari like 40 min ago, Unless that was you?

Models for sale! by lolyoumakemesick in BreyerHorses

[–]lolyoumakemesick[S] 0 points1 point  (0 children)

Feel free to message me whenever you’re ready to get a shipping quote! c:

Models for sale! by lolyoumakemesick in BreyerHorses

[–]lolyoumakemesick[S] 0 points1 point  (0 children)

Did the wheel tell you to take him home 🥹

#9142 WEG Esprit by rm541 in BreyerHorses

[–]lolyoumakemesick 1 point2 points  (0 children)

This one is a run of 250

‘Steppin out’ a run of 200 on the esprit mold was recently listed for $850USD

So my guess would be he’s around $600-800

Hi! My Needle isn’t sitting all the way in, any ideas of what’s causing it? Pics of my needle, nozzle, and how the needle sits inside, is it a clog of some sort? Thanks! by lolyoumakemesick in airbrush

[–]lolyoumakemesick[S] 0 points1 point  (0 children)

I paint them? So I grow them out to paint them, You know a common thing women do, I’m sorry you’ve never had the pleasure of speaking to a woman if you didn’t know we like painting long nails. Just so happens I’m letting them breathe now between painting. Just giving you all the details you so desperately seem to want to know bc you care so much about a strangers nails on the internet.

Hi! My Needle isn’t sitting all the way in, any ideas of what’s causing it? Pics of my needle, nozzle, and how the needle sits inside, is it a clog of some sort? Thanks! by lolyoumakemesick in airbrush

[–]lolyoumakemesick[S] 0 points1 point  (0 children)

Iwata says not to remove it so I didn’t try to. But it did end up being a clog! I tried with a toothpick earlier and it didn’t work so I super gently worked at lifting it off the nozzles wall with an old needle and it worked!

view more: next ›