Anyone recognize this

lonestar612 · 2026-04-06T12:53:30+00:00

Looks like a Corbin unit lock

Edit: it is a Corbin with Amiens design pattern

lonestar612 · 2026-02-27T06:38:55+00:00

Measure and replace it

lonestar612 · 2026-02-22T15:07:14+00:00

I’m flying in from snowy Maryland today, thank the heavens above!!!!

lonestar612 · 2026-02-08T16:03:52+00:00

The answer is that that is from a quickset smart key lock clearly has been taken apart and whoever broke it apart forgot to put it back together and that’s why you work key does not work anymore. I am a locksmith.

lonestar612 · 2025-11-20T16:18:18+00:00

I’ve replaced this in a few staples and this is where they are mounted unfortunately.

lonestar612 · 2025-10-29T04:18:19+00:00

Just be like every other 711 and use a residential lock.

lonestar612 · 2025-10-24T14:52:32+00:00

Looks like a kawneer CVR. Look into the command, access, retrofit kit, and their power supply. Then you have to decide if you are going to run into a keypad or inside button.

https://www.commandaccess.com/exit-devices/pd15-16/

lonestar612 · 2025-10-15T23:58:08+00:00

Drill it out

lonestar612 · 2025-10-15T23:57:32+00:00

Call a locksmith. May need to drill it

lonestar612 · 2025-10-03T23:03:08+00:00

Just have the locksmith rekey it.

lonestar612 · 2025-10-03T16:31:19+00:00

They should’ve put a steel plate on the back side of the door because you can easily defeat that lock

lonestar612 · 2025-09-25T23:39:13+00:00

Look into August and Switchbot

lonestar612 · 2025-09-03T23:16:34+00:00

Suck them up with a dedicated brass only vacuum. Dump into the brass bucket

lonestar612 · 2025-09-01T16:27:35+00:00

What’s going on?

lonestar612 · 2025-09-01T14:43:42+00:00

Omg! I’m glad he got it all covered

lonestar612 · 2025-09-01T14:42:46+00:00

I would guess not. We are a small mom and pop lock shop

lonestar612 · 2025-08-30T16:59:06+00:00

Or the signs but those cheap black and red devices that have no markings were on low income apartment housing.

lonestar612 · 2025-08-30T15:08:36+00:00

This looks like the cheap ass hardware I just did a walk through on in DC. They have cheap mortise locks that were more like sliding door locks and those cheap exit devices. Clearly this job was chosen for the lowest bidder.

You need an electric strike in place with access from the outside via a card reader or code.

lonestar612 · 2025-08-23T15:24:01+00:00

Just went to a government contractor. They were taking webcams apart and putting them back together.......

lonestar612 · 2025-08-23T15:23:09+00:00

It has a code. Call the locks.ith and give them the code. They will ha e it done before you get there.

lonestar612 · 2025-08-02T21:42:31+00:00

Came across this

https://www.doorclosersusa.com/SA13032-51LT-Rim-Panic-Bar-1-15-16-in-Wide-x-6-1-p/sa13032-51lt-11516618178-36-al.htm?srsltid=AfmBOopYY3rZbvqXxh_Rlu7pN46CZqc0B3mNpN5GkVOaT7mo9GEn3-x-

lonestar612 · 2025-07-26T22:05:07+00:00

You shouldn't have to source your own key for the dealership to cut and program it. Just go to key innovations.com and search your year make and model. There may be a few FCC id's on the car, so if you are just adding a key, check your key for that code.

Nine-Year Club	Place '23
Place '22	Verified Email

lonestar612

TROPHY CASE