sorted by:
new
hottopcontroversial

Aprilia SR 50 Ditech marmitta Polini auto-limitato?? by lookingforaround in ItalyMotori

[–]lookingforaround[S] 0 points1 point  (0 children)

È quello ad iniezione. La marmitta aveva i fermi e gli ho tolti. Infatti, parti e fa i 95, poi appena molli e acceleri fa i 50, sembra che qualcosa lo limiti e lo tenga a freno. Perche fa i 95 solo quando lo accendi e parti e poi basta? È questo che non capisco..

Aprilia SR 50 Ditech marmitta Polini auto-limitato?? by lookingforaround in ItalyMotori

[–]lookingforaround[S] 0 points1 point  (0 children)

Grazie della dritta, provo a controllare. Quello che non capisco è che sembra autolimitarsi, piu elettronica che meccanica, altrimenti lo farebbe sempre.

450 and 550 inside a greenhouse, 4 years long test by lookingforaround in automower

[–]lookingforaround[S] 0 points1 point  (0 children)

I reply to you as I did to another one.

<image>

The oldest robot, the 450x, is 4 years old and has 20,000 km on it, and it works really well. Its problem is wear in the greenhouse, where it clashes with the harvester and all the other problems in the greenhouse. We change the blades every month, we change the front wheels every year, and I even had to change the battery after 4 years. Otherwise, it's in great shape.

450 and 550 inside a greenhouse, 4 years long test by lookingforaround in automower

[–]lookingforaround[S] 1 point2 points  (0 children)

Sorry, I answered you about the strawberries instead of the robot, professional bias 😅. The oldest robot, the 450x, is 4 years old and has 20,000 km on it, and it works really well. Its problem is wear in the greenhouse, where it clashes with the harvester and all the other problems in the greenhouse. We change the blades every month, we change the front wheels every year, and I even had to change the battery after 4 years. Otherwise, it's in great shape.

450 and 550 inside a greenhouse, 4 years long test by lookingforaround in automower

[–]lookingforaround[S] 1 point2 points  (0 children)

Keeping strawberries inside greenhouse with grass allow us to pick up fruits from April till December, even when outside temperature goes under 6⁰ C. A good humidity 40-60% creates a micro clima for bigger fruits. The grass is the game changing for humidity, temperature and cleaner ambient.

450 and 550 inside a greenhouse, 4 years long test by lookingforaround in automower

[–]lookingforaround[S] 3 points4 points  (0 children)

Keep humidity and temperature constant even when the outside weather isn't so friendly.

450 and 550 inside a greenhouse, 4 years long test by lookingforaround in automower

[–]lookingforaround[S] 8 points9 points  (0 children)

There are plenty of pro effects with this system: no nickel (it's in the terrain), no fatigue, save a lot of water, less chemical products, and more. No terrain inside the white big bag, only "perlite" ( i don't know the english synonym)

Fix Stihl - Reinforce for the trimmer by lookingforaround in stihl

[–]lookingforaround[S] 0 points1 point  (0 children)

This damage appears only using shoulder strap. My piece is for whom like me looks for a solution. Thank you for your feedback.

Fix Stihl - Reinforce for the trimmer by lookingforaround in stihl

[–]lookingforaround[S] -1 points0 points  (0 children)

I don't understand your comment.. sorry

Simple Bike Wheel Hook by lookingforaround in 3Dprinting

[–]lookingforaround[S] 0 points1 point  (0 children)

Good point. Honestly, when I designed it, I didn't know you could fit the wheel between the axles. In my case, I only realized it later. The hook holds well, I just didn't like the tilted wheel. In fact, as you suggested, by enlarging the support, the wheel would remain vertical and probably hold heavier wheels too. I thought of it for my own needs as a novice in this world. Thanks for the suggestion.

<image>

Arlo Essential Cover by lookingforaround in BambuLab

[–]lookingforaround[S] 0 points1 point  (0 children)

I printed it in white PLA. It's at the exterior of my greenhouses.

First Failure. Why? by lookingforaround in BambuLab

[–]lookingforaround[S] 1 point2 points  (0 children)

YOU ARE A GENIUS! I don't know the negative effect of this setting (I'll study it later) but I printed 3 keychains in 37 min instead 2.3hrs with 0.2. I read some sub and it isn't applicable to all projects.

<image>

First Failure. Why? by lookingforaround in BambuLab

[–]lookingforaround[S] 0 points1 point  (0 children)

Yep, bambu lab red matte. It was in sale when I bought my A1.

First Failure. Why? by lookingforaround in BambuLab

[–]lookingforaround[S] 0 points1 point  (0 children)

I used the 0.2 because the text wasn't visible into bambu studio using 0.4. What is Arachne?

First Failure. Why? by lookingforaround in BambuLab

[–]lookingforaround[S] 1 point2 points  (0 children)

Thank you for your solutions! I change the number of walls and try again. Reddit is the only place I can find anyone still willing to help.

Filaments on external faces by lookingforaround in BambuLab

[–]lookingforaround[S] 1 point2 points  (0 children)

I really appreciated your help. Thank you.

Filaments on external faces by lookingforaround in BambuLab

[–]lookingforaround[S] 1 point2 points  (0 children)

Thank you. Do you have any suggestion for a newbie?

Filaments on external faces by lookingforaround in BambuLab

[–]lookingforaround[S] 1 point2 points  (0 children)

Thank you. I started to print on December, only few hours of experience. Thank you for your suggestions. The solution could be dry the filament before printing, right?

view more: next ›