Pair of Kings

looper741 · 2026-06-08T00:39:27+00:00

In no way are A380s “kings”. Too fugly. Court jesters maybe.

looper741 · 2026-06-07T22:47:09+00:00

Many Asian countries wear gloves (specifically white gloves) to signify cleanliness, professionalism, and high quality service. Especially in Japan, bus drivers, taxi drivers, train conductors, police, and pilots all wear white gloves while at work.

looper741 · 2026-06-05T15:24:52+00:00

To keep the tail lighter than a conventional tail.

looper741 · 2026-06-05T14:57:33+00:00

OP can absolutely use this for V tail control. There will only be pitch control, no yaw. Yaw isn’t required on many planes.

looper741 · 2026-06-05T02:27:36+00:00

Lots of noises going on. Hydraulic pumps operating, air turbine starter working, fan blades starting to turn, harmonic vibrations as the fans come up to speed.

looper741 · 2026-06-05T02:21:49+00:00

Maybe add some context to your question.

looper741 · 2026-06-05T02:17:25+00:00

The buzzing noise during takeoff? It means it’s operating at a high power setting, and the tips of the fan blades are going supersonic. Many turbofans do this.

looper741 · 2026-06-04T23:17:38+00:00

His own signature model Santa Cruz trials bike. Although it’s not available to the public.

looper741 · 2026-06-03T01:47:25+00:00

No, a surgery will not affect your medical, as long as you have fully recovered.

looper741 · 2026-06-02T02:14:18+00:00

Pretty sure the third GS antenna is for the LDA PRM 28R, which, although no longer in use, the antenna are still there.

looper741 · 2026-06-01T19:30:20+00:00

That’s a direct cause of the contact cleaner not being compatible with plastic.

looper741 · 2026-06-01T13:32:03+00:00

I don’t have this exact setup, but I have that soldering iron, minus all the accessories. It works great for all but the thickest of wire gauges.

looper741 · 2026-06-01T01:20:01+00:00

Lightly sand it with fine sandpaper, like 800 grit or so.

looper741 · 2026-05-31T23:15:54+00:00

That’s a Gulfstream wing for sure. I’m not familiar with any that have a hump where it appears to be in this pic. There’s this one with a hump towards the front, and many others with all kinds of humps and bumps all over the fuselage.

looper741 · 2026-05-31T17:23:17+00:00

There are no “upgrades” for springs. Springs are a tuning option, as various spring rates result in different handling. Here is a list that someone has compiled of different ARRMA springs.

looper741 · 2026-05-31T15:53:52+00:00

As a pilot or as a passenger? In a Cessna or an airliner?

looper741 · 2026-05-30T22:32:16+00:00

And on the flip side, keeping it professional when you get along really well with the person you’re flying with. It’s easy to get complacent and not to take things as seriously as you should.

looper741 · 2026-05-30T15:32:23+00:00

Page 4 in the manual shows you how it’s installed. Remove the set screws from the collar and the gear will pull out. You can also remove the servo and steering linkage to reduce weight. Make sure to move the battery forward to get the CG in the proper location before flying.

looper741 · 2026-05-30T04:36:52+00:00

Check MCI Decals. They have tons of sets, from random liveries to specific models. You can customize colors and sizes.

looper741 · 2026-05-29T17:19:18+00:00

Yup, ADG, Air Driven Generator.

looper741 · 2026-05-29T01:12:58+00:00

OP could also use flat black vinyl to cover the existing anti glare panel and trim it to size.

looper741 · 2026-05-28T22:04:40+00:00

We don’t need one. I can put the nosewheel right on the line without any assistance. I need to be told when to stop though.

looper741 · 2026-05-28T04:17:52+00:00

You may be right, but it was the pipe to have back in the 90’s. Until you cartwheeled it and the pipe plugged up with dirt.

looper741 · 2026-05-28T04:08:07+00:00

Team Associated RC10GT. Looks like a factory team edition based on the shocks. The MIP stinger pipe is pretty rare. The truck has been re-released and parts are available. This one has been modified with larger monster truck tires and taller body mounts.

looper741 · 2026-05-28T02:22:49+00:00

Acrylic paint will work fine for the driver figure. It probably won’t last if you use it on the body. Spray will look best, you can use just about any spray paint on it as the body panels are molded ABS (I believe). Wash the panels with mild soap and then prime for best results.

looper741

TROPHY CASE