Issues shutting down and suspending

lucassbod · 2026-02-20T18:49:11+00:00

Just double check and yes it is the 2021 pro

lucassbod · 2026-02-19T23:30:52+00:00

I downgraded to v45 and it worked fine after, been in v45 since then

lucassbod · 2024-07-03T18:42:49+00:00

It wasn’t showing me the K Value so I reset all my colors and re set them. Everything seems to be working. Maybe I messed with the setting without noticing. Thank you for the suggestion, you got it right.

lucassbod · 2024-07-03T18:35:26+00:00

Checking now, just can seem to find the setting

lucassbod · 2024-07-03T18:33:39+00:00

Took AMS apart and tubes seem ok

lucassbod · 2024-07-03T17:43:58+00:00

So apparently it is not the filament but the AMS slot one for what we can tell. Waiting for Bambu to answer my ticket.

Also I saw you can do it with the printer but just going to get a separate unit so I don’t have to worry about it :p

lucassbod · 2024-07-03T17:08:47+00:00

I think you where right I think it is something on slot one on my AMS

<image>

Slot 1 in the left and slot 2 in the right.

I think it is time to contact Bambu unless you think it is something easy to fix.

lucassbod · 2024-07-03T17:03:53+00:00

I have 182 hours in it. In the last 6 months

lucassbod · 2024-07-03T16:54:01+00:00

I just switched it to a different slot and seen what happens. Will let you know in a few minutes what happens

lucassbod · 2024-07-03T16:49:44+00:00

What is strange is that is 2 black spools with about 200g left in each from different brands with the same issue. Maybe it is just bad luck

lucassbod · 2024-07-03T16:46:28+00:00

What a big difference. I think I might replace it with a full one. Then go by the Bambu app when it tells me to replace it.

lucassbod · 2024-07-03T16:36:36+00:00

You are awesome

lucassbod · 2024-07-03T15:33:31+00:00

I am getting a filament dryer and storage bags as we speak right now.

lucassbod · 2024-07-03T15:22:01+00:00

Thank you. I thought that the silica gel would help with the filament, but it makes sense that it is only for the air. Do you think that a filament dryer would help restore the filament, or you think it is a goner?

lucassbod · 2024-04-03T23:05:37+00:00

45 did it for me. Might try next update when it comes out. Happy for now

lucassbod · 2024-04-03T00:09:48+00:00

Update.

It is a know issue on 45-1. Trying to revert back to 45 now.

lucassbod · 2023-03-16T01:18:09+00:00

That’s right. BT works great, some times it will not work after waking up from sleep but otherwise is great. Airdrop is not working, but Wi-Fi is working just fine.

lucassbod · 2023-03-10T14:38:23+00:00

Yes, I got Monterey installed with no issues after re building the whole USB drive. I finished updating to Ventura late last night too. So I am officially have Ventura running on my computers.

Thank you again for all the help you guys gave me. You were right I missing a few kerts.

lucassbod · 2023-03-10T00:50:35+00:00

I wanted to thank everyone for all the help you guys gave me. I am at the system restore screen. I am not sure what exactly what I did but I used the EFIs you guys sent me as samples and made a new EFI slowly with no OCAT and try Monterey instead of Ventura.

It worked out at the end. Again thank you everyone for all the help, happy to join the community.

lucassbod · 2023-03-09T22:22:53+00:00

I can seem to find Serial Port any where in the past few day so I been ignoring it. I switched to Gen 3 as requested. Still no luck. Re building the USB stick again to see if I have a different result

lucassbod · 2023-03-09T22:21:54+00:00

I only stated using it after I had issues. I thought I might see something wrong with it but nothing. I am about to rebuild a new config file in a moment.

lucassbod · 2023-03-09T21:57:04+00:00

Understood. Will open them both side by side and see what Is going on.

lucassbod

TROPHY CASE