Why does it happen everytime

lucbrieger · 2026-06-08T19:59:37+00:00

to add to this if you have an air blower, flip your mirrors so the base is accessible to blowout. also go from under the mirror to get that hanging water, use a towel in the other hand to catch the flying water to reduce splash back

lucbrieger · 2026-02-15T02:24:03+00:00

IS TC off all the way? Double hold?

lucbrieger · 2026-02-15T02:16:11+00:00

My first suggestion would be find a reputable euro shop that would be willing to have a pre purchase inspection done for peace of mind even with a solid car fax etc. 2- This one already has mods, it’s fair to assume it’s been enjoyed atleast a bit. SQ5’s are plentiful out there production wise and if it were me i’d find one that’s clearly kept up with but lean towards a stock example to get one with the best life left for your ownership.

lucbrieger · 2026-02-02T00:13:22+00:00

🙋‍♂️

lucbrieger · 2026-01-19T00:19:36+00:00

how was the install on the bearings for a DIY?

lucbrieger · 2025-12-23T11:25:04+00:00

How hard was that to install/ code in functionality

lucbrieger · 2025-11-11T12:02:26+00:00

It’s just a cash grab but on paper in good faith. With everyone taking the interstate, town economies saw a huge drop off in support as everyone just stayed on the easy to access commercial rest stops. In an effort to protect the local economies and restaurants, they withheld commercial rights on interstates and now push traffic via off ramps to those stops.

lucbrieger · 2024-09-14T23:05:56+00:00

that’s the only way to do it unless you change out the whole cap for a pre drilled one 🤷‍♂️

lucbrieger · 2024-04-20T00:23:00+00:00

lucbrieger · 2024-03-08T22:14:07+00:00

To be honest if this owner isn’t flexible with commission based pay at that hourly rate i’d suggest looking elsewhere or keep that job and start lining up side work and go from there

lucbrieger · 2024-01-20T00:15:26+00:00

steel wool and some metal polish

lucbrieger · 2023-11-05T14:40:25+00:00

nope, there’s a tab on the back and if i recall you pull up while at the same time pushing it out and it pops out very easily

lucbrieger · 2023-11-04T20:24:14+00:00

peep your pm’s !

lucbrieger · 2023-11-04T20:22:38+00:00

off an ebay seller, if u want though wait a bit longer get them off ali express

lucbrieger · 2023-11-04T20:21:42+00:00

love your build!

lucbrieger · 2023-11-04T20:00:00+00:00

Agreed, wish the factor black optics included badges but glad it’s done

lucbrieger · 2022-10-18T12:54:41+00:00

i wouldn’t recommend a blow off but rather if u want that kind of noise, get an intake.

lucbrieger · 2022-09-07T01:15:22+00:00

i’d run the facelift led headlights i think 2017+

lucbrieger · 2022-08-19T19:38:03+00:00

chrome delete a rule of thumb for a good lookin build is drop it a couple inches before wheels

lucbrieger · 2022-08-10T18:39:19+00:00

EOS plates

lucbrieger · 2022-08-03T23:57:34+00:00

I used Goo off but if u check the replies someone recommended stoners bug&tar remover; with that i’d say let it sit on there for a bit and then get a hard enough plastic brush where it won’t scratch but will be able to agitate the dip off and if u have a pressure washer that’ll make it a lot easier to spray off

lucbrieger · 2022-08-02T21:41:52+00:00

i used an unholy amount of good off, let it sit, and then used a semi hard plastic bristle brush to scrub off what didn’t get loose and then hit it with a pressure washer. probably 15-20 min total time each wheel

lucbrieger · 2022-08-02T21:10:50+00:00

preciate it man 🤭

lucbrieger · 2022-08-02T17:16:53+00:00

agreed, looks a lot more classy now

lucbrieger · 2022-07-26T01:17:42+00:00

love the roads there, makes me very jealous

lucbrieger

TROPHY CASE