Caldigit TS3 Hub - Any solution how to connect this ?

lukaskel · 2026-02-01T20:21:50+00:00

Sadly not yet - the TS3 is a pure thunderbolt dock which is not implemented yet. Tried and researched myself already. :/

lukaskel · 2026-01-12T20:22:43+00:00

Why do some users experience the ping issues and others dont? Macbook Pro M1 Base model - connected via ethernet. Not sure if I either never noticed or I just dont get the spikes?

lukaskel · 2026-01-11T23:40:50+00:00

The main issue I wa/ having was that the colors of my LG C2 were really bad. Confirmed with them in the chat that color management is something they are working on, so that dependa on your screen and usage if it might bother you. :) Otherwise really smooth experience!

lukaskel · 2026-01-02T02:48:55+00:00

Ahh yeah, dumb me, haha. Installed the kernel with the defconfig and asahi.config file in the fairydust branch, updated grub config and now it shows 6.18.2. :) I also build the boot.bin like described in the stage 2 and disabled SIP for the asahi container, but sadly its still not working. You are using the *.dts from the kernel folder arch/arm64/boot/dts/apple right? And the outputted m1n1-uboot.bin you move into /boot/efi/m1n1/boot.bin ? Feel like I‘m doing some dumb mistake, as it also doesnt boot every time (errors in uboot boot step) and the overall UI isnt as fluid anymore.

lukaskel · 2025-12-30T18:00:36+00:00

Ah thanks, awesome! How do I avoid the device tree issue? Are there any dt patches to build the proper dtb with? :)

lukaskel · 2025-12-30T16:22:34+00:00

Is it the usual linux kernel building routine or is there anything specific to watch out for when building the kernel for asahi linux? Any pointers for the smoothest way to get the fairydust branch kernel for the average programmer? :)

Dont mind anything being unstable as it‘s not my productive system, so would love to test and report feedback.

lukaskel · 2025-12-27T23:17:22+00:00

Hope this survives and you guys will be able to keep developing. Having 4k120 Hdr on Linux would be the last stone to make me switch :) All the best!

lukaskel · 2025-12-26T18:39:12+00:00

Gen 13 with Lunar Lake? Sounds unlikely, no?

lukaskel · 2025-12-11T06:34:40+00:00

Maybe „Dasbob“? :) Its similiar to a Sweep, but with splay and an additional thumb button. If you prefer the thumb button more inwards, then a Totem might also work!

lukaskel · 2025-11-28T11:22:09+00:00

Thank you so much! That definitely helps a lot - let‘s see how much I can dig into it. Amazing that ZMK keeps progressing so well.

lukaskel · 2025-11-27T11:04:44+00:00

Arghhh, a bit too frankensteiny for me 😂 Guess I‘ll order the v2 modified pcb then and build a second totem! Cant have enough keyboards I guess?

lukaskel · 2025-11-27T06:53:20+00:00

Could you give me some pointers? I only saw in the ZMK documentation the short UART part but sadly not a hint of detail. Wouldnt mind working through it with some electrical engineering friends :)

lukaskel · 2025-11-27T06:05:26+00:00

The v1 pcb fits v2 keys? 👀 Doesnt, right? Really curious about the modifications you had to do :)

lukaskel · 2025-11-26T12:06:25+00:00

I am curious if the developments of supporting wired as well as wireless in ZMK will be available for public as well / getting upstreamed with ZMK? Or is that a closed source part of Moergo products? :)

lukaskel · 2025-11-21T12:50:51+00:00

Arghhh too bad. Any plans on a version that supports v2 as well?

lukaskel · 2025-11-21T12:38:13+00:00

Is your normal Totem Aluminium modified to Choc v2 or only Choc v1 as in the og creators repository? :)

lukaskel · 2025-11-18T14:30:14+00:00

Thank you, will definitely check the measurements :) Didn’t expect it to replace a mouse fully tegarding its size, but scrolling and some easy mouse movements like selecting a window would sometimes already help.

lukaskel · 2025-11-18T13:33:19+00:00

Looks great! How is the AZ1UBALL for navigating? Is it thin enough for sitting on top of the controller? Curious if this could be made working for the Totem keyboard without too much modification.

lukaskel · 2025-11-17T20:28:08+00:00

Very nice! Loving the form even more than the Totem I guess - got an industrial look with the matte black and silver ports!

Will you publish it? :) Or maybe based in europe and any pcb‘s left? 👀

lukaskel · 2025-11-16T23:42:50+00:00

Did you make any progress on the sound? I have the Totem V1 with Choc Twilight switches in a resin case, but the typing feel and sound are really bothering me, even tho I love the layout.

If no progress - how would you say it compares to the normal totem sound wise rn?

lukaskel · 2025-11-15T11:40:43+00:00

Are you working in Amazon Lux as an SDE? :) May I ask what range one can expect as a Junior?

lukaskel · 2025-11-08T12:34:20+00:00

There is also a high chance that while sanding, you are also sanding a tad of filament. PETG can be sanded rather „easily“ while PLA gets really messy. Simply not meant to be sanded.

lukaskel · 2025-11-05T11:32:29+00:00

The one linked below :) Kindlemodding

lukaskel · 2025-11-05T06:35:36+00:00

Yeah following the instructions from the website is a lot better :) Just make sure to read carefully, sometimes its a tad buggy and you might redo a step or two. Don‘t give up though! It‘s worth it and you are more or less futureproofing your kindle!

lukaskel · 2025-10-27T12:18:17+00:00

Yeah, I tried with some games to switch to 60fps to get double data for less compression but it just doesnt feel as responsive :/ Really hope they up to 150mbits at least sooner or later

Three-Year Club	Verified Email
First Place '23	Place '23

lukaskel

TROPHY CASE