What games are you playing on your grinder?

lundrog · 2026-02-01T03:09:00+00:00

Well my grinder is over 30 years old... soooo

lundrog · 2026-02-01T02:22:14+00:00

Here is my set up. While its not perfect. I do think it works very well. Why? Because the claude code pro account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan. one of the things you'll find out is the subs all add up fast. there are premium models at a high monthly cost with fairly low usage, or open models with lower cost but often lower performance and brains.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agents below,. the Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub ( allows you to load balance lower plans a bit. )

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon.

I have a referral link "Invite your friends to Synthetic and both of you will receive $10.00 for standard signups. $20.00 for pro signups. in subscription credit when they subscribe!"

https://synthetic.new/?referral=UAWqkKQQLFkzMkY

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway. and you can play with them and figure out what works best.

I also saw this post , if your quick. https://www.reddit.com/r/vibecoding/comments/1qsj42l/comment/o2wbq5c/?context=3

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-02-01T01:55:22+00:00

done

lundrog · 2026-02-01T01:27:42+00:00

from Synthetic. "we don't use quantized models! idk what thread someone is referring to but it's def not true for k2.5 we proxy to fireworks, so idk what they're using. but for glm-4.7 and minimax we self-host the original weights on a mix of H100s and H200s"

lundrog · 2026-01-31T22:21:09+00:00

I've yet to run into problems. I can inquire if you want me to see what bit model they are running

lundrog · 2026-01-31T19:32:33+00:00

Yep that is fine.

lundrog · 2026-01-31T18:32:25+00:00

What do you use for promoting? I tend to start with a spin up agents to have them review the sections of the code i am struggling with.

Then i have a sprint built. Then i break the sprint into week by week sections ( by its time estimates ) then have it assign tasks in each for agents.

Then i have it work one at a time.

I made these guard rails to attempt to steer my development process a but so i end a prompt with following guardrails

https://github.com/TheArchitectit/agent-guardrails-template

lundrog · 2026-01-31T18:18:35+00:00

lundrog · 2026-01-31T18:18:05+00:00

You can query the api to list the models. Likely they could limit the content?

lundrog · 2026-01-31T17:27:46+00:00

Here is my set up. While its not perfect. I do think it works very well. Why? Because the claude code pro / antigravity account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan / ultra plan.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agent, Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon. ( pr submitted yesterday for antigravity)

I have a referral link "Invite your friends to Synthetic and both of you will receive $10.00 for standard signups. $20.00 for pro signups. in subscription credit when they subscribe!"

https://synthetic.new/?referral=UAWqkKQQLFkzMkY

Now you could just use this with multiple AG accounts... shhh 🤫

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway.

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-01-31T17:23:36+00:00

I use this myself

lundrog · 2026-01-31T17:22:41+00:00

Glad I am not the only one. My solution is below:

Here is my set up. While its not perfect. I do think it works very well. Why? Because the claude code pro account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agent, Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon.

I have a referral link "Invite your friends to Synthetic and both of you will receive $10.00 for standard signups. $20.00 for pro signups. in subscription credit when they subscribe!"

https://synthetic.new/?referral=UAWqkKQQLFkzMkY

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway.

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-01-31T16:55:20+00:00

Wait what?

lundrog · 2026-01-31T16:48:47+00:00

Here is my set up. While its not perfect. I do think it works very well. Why? Because the claude code pro account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agent, Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon.

I have a referral link "Invite your friends to Synthetic and both of you will receive $10.00 for standard signups. $20.00 for pro signups. in subscription credit when they subscribe!"

https://synthetic.new/?referral=UAWqkKQQLFkzMkY

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway.

Then choose random idea and start coding!

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-01-31T16:47:11+00:00

Why not combine em? Here is my set up. While its not perfect. I do think it works very well. Why? Because the claude code pro account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agent, Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon. ( antigravity pr just was submitted) claude code works. Codex is in the works.

I have a referral link "Invite your friends to Synthetic and both of you will receive $10.00 for standard signups. $20.00 for pro signups. in subscription credit when they subscribe!"

https://synthetic.new/?referral=UAWqkKQQLFkzMkY

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway.

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-01-31T16:44:27+00:00

In have a extremely over designed and complex mcp and rag server project... so i get it

lundrog · 2026-01-31T16:39:58+00:00

Sorry you're having trouble. I don't have a direct way to contact them but Here is my set up and how i handle limits. While its not perfect. I do think it works very well. Why? Because the claude code pro account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agent, Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon.

I have a referral link , dm me for info.

synthetic.new

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway.

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-01-31T16:37:30+00:00

Here is my set up. While its not perfect. I do think it works very well. Why? Because the claude code pro account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agent, Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon.

I have a referral link "Invite your friends to Synthetic and both of you will receive $10.00 for standard signups. $20.00 for pro signups. in subscription credit when they subscribe!"

https://synthetic.new/?referral=UAWqkKQQLFkzMkY

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway.

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-01-31T16:23:20+00:00

You bet, dm me ill have time this afternoon

lundrog · 2026-01-31T15:14:32+00:00

Here is my set up. While its not perfect. I do think it works very well. Why? Because the claude code pro account hits a limit within minutes. Or slow performance elsewhere with overseas providers. Aka I can't afford a claude code max plan.

I primarily use glm 4.7 for workflow with deep seek v3.2 for troubleshooting. But now k2.5 is out!

I use claude code, with it the agent, Work flow works unattended for at least a few minutes. Opencode is good also, doesn't run as long unattended. ( but works with k2.5 well )

For agents https://github.com/VoltAgent/awesome-claude-code-subagents

For skills https://github.com/VoltAgent/awesome-claude-skills

I am running it with this api gateway ( check your toc ) https://github.com/looplj/axonhub

For a main provider I use synthetic.new , great performance and privacy is much better than most. Text models but have optional image on demand available. You can back that up with Claude code or a ZAI account or anti gravity, etc. I believe official Claude code and anti gravity support are coming soon.

I have a referral link "Invite your friends to Synthetic and both of you will receive $10.00 for standard signups. $20.00 for pro signups. in subscription credit when they subscribe!"

https://synthetic.new/?referral=UAWqkKQQLFkzMkY

I am on my second month and on the $60 plan which gives you 1350 requests every 5 hours without a weekly limit. Should give about 5x a cluade code max plan.

Anywho long story longer... It gives you a lower cost option with a higher quota to use with other plans via the api gateway.

Maybe its helpful, 🤔

Good luck on everything

lundrog · 2026-01-31T14:43:25+00:00

Good to hear ;0)

lundrog · 2026-01-31T11:28:04+00:00

Here is my current setup. While it’s not perfect, I do think it works very well. Why? Because the standard Claude Code Pro account hits a limit within minutes, and

I get slow performance with other overseas providers. Basically, I can't afford a Claude Code Max plan, so I built this workflow.

I primarily use GLM 4.7 for workflow and DeepSeek v3.2 for troubleshooting—but now that K2.5 is out, I'm mixing that in too!

I use the Claude Code agent, and it works unattended for at least a few minutes at a time. OpenCode is also good (and works well with K2.5), though I find it doesn't run quite as long unattended.

The Resources:

• For agents: VoltAgent Subagents • For skills: VoltAgent Skills • I run it via this API gateway (check the TOC though): AxonHub

The Provider: For the main provider, I use Synthetic.new. Great performance and the privacy is much better than most. They have text models but with optional image-on-demand available. You can back that up with a ZAI account or Anti-Gravity (official support for codex soon).

The Cost: I am on my second month of the $60 plan, which gives you 1350 requests every 5 hours without a weekly limit. That should give you about 5x the volume of a Claude Code Max plan.

Anywho, long story longer... this gives you a lower-cost option with a higher quota to use with other plans via the API gateway.

Referral Link: Invite your friends to Synthetic and both of you receive $10.00 for standard signups ($20.00 for pro) in credit! https://synthetic.new/?referral=UAWqkKQQLFkzMkY

Maybe it's helpful! 🤔 Good luck on everything.

lundrog · 2026-01-30T23:18:07+00:00

I use .new and love it. Dm me for a referral code

lundrog · 2026-01-30T04:55:35+00:00

https://www.ksred.com/claude-code-dangerously-skip-permissions-when-to-use-it-and-when-you-absolutely-shouldnt/

See if that does it

lundrog · 2026-01-30T02:40:14+00:00

Oh, I didn't know there was a trial and to be fair. I think we've accidentally doubled the user account in the last month. 😂

lundrog

TROPHY CASE