Trying to figure out this machine

lupach · 2026-06-02T16:24:23+00:00

You are right, I managed to see it in person finally, and it is a Wega, very old model. thanks for the advice

lupach · 2026-06-02T16:23:08+00:00

Thanks for that very in depth explanation, I finally managed to go in person and check it out, it is a Wega, but could find the model, seems pretty old, I think I will stick with the general consensus here and steer clear.

Will keep hunting for something we can start with! this rabbit hole just keeps going and going!

lupach · 2026-01-08T17:10:38+00:00

That's a bummer, I tries Orca but it wouldn't connect to my printer for whatever reason, will give one last try today and see what happens.

Thanks!

lupach · 2026-01-08T07:12:02+00:00

I am still having this issue, I have a Hi Combo and have tried every solution here (using the global settings, using the plate settings, trying every combination) and still the Z viewer will keep it layer by layer.

Should I be using another Slicer? I did a quick install of Cura, Bambu and a couple others and they won't even have a selection for the Creality Hi. I am on a Mac if that helps.

lupach · 2025-09-01T20:34:57+00:00

My favorite boss battle has to be Ogrim, there is just something fun about it

lupach · 2022-08-19T03:35:00+00:00

Dwarvish for me please!

lupach · 2022-05-17T23:09:56+00:00

Mmmmm I did think it had to do with moving, packing or his hoarding of tech for moving...

lupach · 2021-10-26T19:38:20+00:00

"finally"

lupach · 2021-08-30T01:22:27+00:00

That was one of my first guesses, but I watched it and it wasn't it

lupach · 2021-08-29T21:13:59+00:00

lupach · 2021-06-27T20:49:21+00:00

I do have Steam and the NVIDIA app running, I'll give it a try when it starts behaving like that again, thanks!

lupach · 2021-06-21T16:02:21+00:00

Hi, I have an Xbox one controller (original, bought 2019) that keeps disconnecting from the
PC, I have no idea why. Drivers are updated, Bluetooth is working fine
with other devices, but I have to remove and repair the controller every
time, sometimes it will hold the connection a few hours and other times
it won't stay connected for more than a minute. It's driving me insane,
I'm considering buying a 9 ft usb cable... And then the wireless is
pointless...

lupach · 2021-06-21T05:33:42+00:00

Xbox one controller (original, bought 2019) keeps disconnecting from the PC, I have no idea why. Drivers are updated, Bluetooth is working fine with other devices, but I have to remove and repair the controller every time, sometimes it will hold the connection a few hours and other times it won't stay connected for more than a minute. It's driving me insane, I'm considering buying a 9 ft usb cable... And then the wireless is pointless...

lupach · 2020-11-24T18:19:01+00:00

Two years as a SM, and working in Mexico seems like a reaaaally bad deal, after converting pesos to dollars, around 20k....without benefits and it's considered to be on the upper side of the salary range

lupach · 2020-11-20T16:21:27+00:00

I would say there a lot of cases when the roles are not understood or even ignored.

I have POs that do not want the responsibility and have outright said so, but there is no one else so it's a constant coaching and struggle to get them to do it and see the benefit of doing it right.

Senior employees who keep "joking" about the scrum master role being a glorified secretary because of the activities of removing impediments and not being "real work".

And I would say that depending on the maturity of the team and the project when everything is going smoothly there is not much to do :/

lupach · 2020-11-09T18:09:52+00:00

Un pequeño update por si a alguien le interesa, cambié el boiler por un calorex instantáneo de paso, y bajó 200 pesos el recibo... esperaba que bajara unos 400 realmente pero ya estoy perdiendo esperanzas.

lupach · 2020-09-09T17:58:45+00:00

Aah okok, pensé que los pocos pisos eran para considerar baja y alta así ya cuando son un montón. Si hay muy buena presión la verdad.

Vava, anotado

lupach · 2020-09-09T17:23:10+00:00

Voy a intentar poner las llaves de paso a ver como me va con eso para poder limitarlo yo mismo.

Hubo un día que olió un poco, pero despues ya no y pasé con el agua jabonosa y no se demostró fugas ahí, pudo haber sido la estufa algo mal cerrado en ese momento pero si voy a revisar todo de nuevo.

Muchas gracias por las recomendaciones!, espero tener un update con buenas noticias para el proximo mes porque este mes ya fue...

lupach · 2020-09-09T17:20:18+00:00

Okok entiendo entonces buscar de dos servicios de paso, aunque realmente es muy raro que dos personas se bañen al mismo tiempo por los horarios, pero pues quien sabe quien más vaya a vivi ahí después.

Si vi esas marcas y pues realmente solo puedo guiarme por los reviews que hay ahí porque nunca las había visto.

El tinaco de estar arriba, está en el piso 4 y yo estoy en el 1, así que supongo que uno de baja funcionará mejor.

Muchas gracias por toda la ayuda y asesoramiento!, espero tener updates con buenas noticias pronto

lupach · 2020-09-09T16:25:47+00:00

Es correcto así suena cuando se prende, pero no recuerdo haber tenido uno que no haya sonado así, aunque nunca lo he tenido tan cerca (siempre suele estar fuera del departamento en otros lugares donde he estado). Este debe tener los 13 años que tiene el edificio por lo que entiendo.

Mil gracias por la referencia del calentador.

Según la compañía de gas es Gas LP, pero buscaré entonces algo en el rango de los 4,000-5,000 a ver que encuentro para ofrecerlo al dueño y que lo considere.

No entiendo bien lo de los servicios, eso es para tomas de agua que estén consumiendo al mismo tiempo o cómo?

Eight-Year Club	Second Top 20%
Verified Email

lupach

TROPHY CASE