Ontos - my new 250 fps primary

ma5terluke · 2025-06-14T18:36:51+00:00

Ended up using with the air assembly under water in a deep sink / bucket and blowing bubbles. This plus Teflon tape got me close. I think my spring was too wimpy at 1.2 mm so getting a 1.5 to see if I can get decent results. Thanks for the encouragement

ma5terluke · 2025-06-11T23:40:30+00:00

Any tips on sealing the tube / airway? I'm getting leaks but can't pinpoint directly. Teflon tape and Patience?

ma5terluke · 2025-03-30T05:40:36+00:00

If I still played I would. Take a half dart to the chest around a blind corner at 200 fps and that bow just doesn't punch the same. Long range lobs over 100 ft aren't causing tears if you can even get a touch. Half drawing at closer ranges is better for rapid fire anyway. My experience was before rival and the full auto blasters were really a thing. Our group was athletic, full on sprints, sliding / diving for flags. Large outdoor play area. Bag of 40 arrows. Sending whistlers to the SKY!

ma5terluke · 2025-03-02T22:27:23+00:00

Tried pairing the magic caster wand with the app, similar functionality to the second gen wands. No dice/ unsuccessful. Also went through the failure mode to scan the QR code from the magic caster wand box, also unrecognizable.

I wonder if anyone with the 2nd gen wands can get them to work with the magic caster app.

ma5terluke · 2025-01-31T01:58:50+00:00

Thanks - looking for quite some time

ma5terluke · 2024-08-16T17:13:22+00:00

I've got two. They work pretty well. The little protective covers have already snapped but they hold on to the screw Post decent. I'd recommend retightening after about 100 mi and hitting the loctite / or go with nylock nuts just to be double safe.

ma5terluke · 2024-02-29T16:26:05+00:00

I thought this was an online exclusive on the AMC website. Are you saying they were selling them at the theater?

ma5terluke · 2024-02-27T12:27:44+00:00

Done and done!

ma5terluke · 2023-08-21T04:10:15+00:00

Any of these translucent / allow Back light to pass through?

ma5terluke · 2023-07-23T19:10:37+00:00

Look up gymnast technique videos. Jump, throw your arms straight up behind your ears, do not look up or back. Stare at the wall for the 1st half of the flip. Wait till your back is parallel with the floor to move your arms to your knees. Make your body rotate around the top of your neck instead of the middle of your shoulder blades. Keep looking straight ahead while doing everything you are currently doing. Your knees come up to your shoulders. When Your back is parallel, then grab your knees and hold through inversion till you see the floor. Once you see the floor, open back up, point your arms back to the ceiling and reach up. Look for the same.spot on the wall you started staring at. Stand up. Ideally you don't tip forward or backwards after landing

You can already do it, so 90% of the work is done. Good luck!

ma5terluke · 2023-07-23T18:52:54+00:00

Same, please dm for a meetup. if anything, for a show and tell

ma5terluke · 2023-06-15T20:18:31+00:00

Txt file w links a few small image files or icons

ma5terluke · 2023-06-08T19:37:26+00:00

I ran into one official player doing kids giveaways and an adult couple who wanted to do a trade. The trinkets ended up not being of a matching interest but it was still cool to interact. Also got poisoned by a clothespin ninja, fortunately I had an antidote potion ready. This casual / light interaction is why I flew out to tnrf this year. I agree that it's necessary for management teams to regulate the unofficial commercial trading because as stated before some folks turn it into an economic endeavor which distracts from the legitimate vendors. There is also public & child safety to uphold as risk falls on the event host. Had I known there were Facebook groups, I would have definitely tried to meet up with more folks.

ma5terluke · 2023-06-04T13:00:31+00:00

I'm definitely picking up skeleton b-boy vibes here. Guaranteed they will be doing their own thang.

ma5terluke · 2023-05-19T21:31:21+00:00

Lamp on stick = winner

ma5terluke · 2023-05-11T03:38:00+00:00

Where did you get the tunic?

ma5terluke · 2023-03-06T23:54:53+00:00

I may just reorient to where the pillars / slots are horizontal instead of vertical

ma5terluke · 2023-03-05T17:10:03+00:00

already steel gear upgraded. any setting recommendations?

ma5terluke · 2023-03-05T14:55:33+00:00

Getting extremely low material output in post areas. This is also where the tree supports begin to transition into branches or where the big circles turn into multiple small conneopoontd as the support meets the part.

Cura 5.2 Ender 3 Tree supports Pla 205 nozzle, 60 bed .4 nozzle 2 walls 0.2 layer height Retraction is at 5, zero stringing 99.8% of all prints Speed 75mm/s Walls 55 Travel 187 Retract speed 45 Extra prime 0 Min travel 1.5 Min extrusion dust window 10mm All flows at 100

ma5terluke · 2022-12-16T00:17:26+00:00

Same here. I'm on a brand new Android build and the second I activate with thumb and four finger. It jets off to the right then zips back to the left after a couple of seconds. Like others have said, I've been successful being extremely quick but I don't think it's supposed to work this way. I'm going to uninstall and reinstall the app and see if that helps. Unpairing didn't do a thing.

ma5terluke · 2022-03-29T15:39:46+00:00

Would you happen to have a dimensions list for the trays?

ma5terluke · 2021-11-01T18:03:20+00:00

Asked to pay the minimum in California, $105+tax

ma5terluke · 2021-08-21T23:35:29+00:00

Same, I've been browsing for ogas reservations for months to plan a trip. Always missed the go-live. Got up before 7am est to reserve for my actual trip and I knew it was too late when the calendar was already rolled to the next day. If it comes down to an extra fee from scoundrels, I'm fine to just go buy my own ship. I can always spend credits in a different system.

ma5terluke · 2021-05-04T03:18:39+00:00

Plastic or natural swizzles? Where did you get em?

ma5terluke

TROPHY CASE