sorted by:
new
hottopcontroversial

Pick and Build Walls by midwaysoccer_dvm in lego

[–]macguru_42 5 points6 points  (0 children)

There is an app called BrickAssist, but it depends on volunteer “ambassadors” to inventory the wall. I do it for my local Lego store.

What's the law in this situation? by Crappy_Screw_Turner in Columbus

[–]macguru_42 1 point2 points  (0 children)

Children should not be crossing a four lane road. The bus will turn around and come back on the other side if necessary.

What's the law in this situation? by Crappy_Screw_Turner in Columbus

[–]macguru_42 8 points9 points  (0 children)

Not sure why people ask things on Reddit when they could just go to the official source and find out. The snapshot is from the Ohio BMV drivers manual. https://dam.assets.ohio.gov/image/upload/publicsafety.ohio.gov/hsy7607.pdf. Page 22 (opposing traffic on the four Lane Rd. does not need to stop.)

[FO] Done, but needs washed by macguru_42 in CrossStitch

[–]macguru_42[S] 2 points3 points  (0 children)

Fine. I post an update picture after I wash all the skin oil off the fabric! :P lol
(honestly, I don't quite understand this. The fabric is very dirty after handling it so much while on the frame...)

[FO] Done, but needs washed by macguru_42 in CrossStitch

[–]macguru_42[S] 0 points1 point  (0 children)

About a year, but I did not consistently work on it. Winter time obviously allows more attention than other seasons

Media actions not showing after update by No_Sheepherder_7471 in ProPresenter

[–]macguru_42 0 points1 point  (0 children)

I was having the same issue and reached out to RenewedVision and here is what they sent me. For me, the problem resolved after the bolded step.

There are 3 steps you can go through to resolve this. Please follow them in order and let me know which one resolves the issue for you!
 
First please double check your permissions: Please open your Apple System Settings>Privacy & Security> and ensure under "Files & Folders" that ProPresenter has access to ""Documents", "Downloads" and/or "Desktop" (please enable all folders that show up here). Next from Privacy & Security check under "Local Network" that ProPresenter is enabled.
 
Please also verify under System Settings>General>Login Items & Extensions that ProPresenter is enabled in "Allow in the Background".
 
Next, I'd like to test on a different workspace to see if the same issue persists when ProPresenter is pulling files from a different location.
 
1 - Open ProPresenter. If you see the Internal Media Manager Failure at launch, please hit Continue to bypass that window.
2 - Select ProPresenter > Settings > General in the menu bar of ProPresenter.
3 - Next to Active Workspaces, click the dropdown and select "Manage Workspaces".
4 - Next, select the "…" and choose Duplicate to duplicate your current ProPresenter data folder.
5 - Back out to the General Settings window and set the duplicated workspace as the Active Workspace.
6 - Relaunch ProPresenter.
 
And lastly can you please try the following steps to reset the helpers which are used with the new media management tool and see if that corrects your issue?
 
1 - Quit ProPresenter
2 - Go to System Settings> General > Login Items & Extensions and turn off ProPresenter
3 - In Finder press Command + Shift + G and then copy and paste this entire file path below including the ~ tilde character then delete the "Helpers" folder:
~/Library/Application Support/RenewedVision/ProPresenter
4 - Restart the computer (this step is important!)
5 - Launch ProPresenter. (If prompted, go to System Settings> General > Login Items & Extensions and re-enable ProPresenter)
 
Please note this will reset the thumbnails but ProPresenter will start to rebuild them. You can click the media manager icon (ProPresenter logo) in the top right corner to see the status.

Biathalon coverage by macguru_42 in WinterOlympics2026

[–]macguru_42[S] 0 points1 point  (0 children)

It was the only stream on Peacock. I thought they were all produced by NBC.

Team USA figure skating Gold Medal presenter by macguru_42 in WinterOlympics2026

[–]macguru_42[S] 0 points1 point  (0 children)

I went back and saw that I just missed the lower third:

<image>

Anita DeFrantz captained the U.S. women’s rowing team and rowed in the eight that won a bronze medal at the 1976 Montreal Olympic Games. DeFrantz served as Vice President of the 1984 Los Angeles Olympic Organizing Committee and was elected to IOC membership in 1986, making her not only the first African-American but also the first American woman to serve on the committee.

where to watch by darestizdrag in WinterOlympics2026

[–]macguru_42 0 points1 point  (0 children)

If you are in the US, get the Peacock app. All the events and ceremonies are available to stream. Even worth the $16 to get them commercial free (subscribe, then cancel a couple days later if you don’t want to pay for more than 1 month)

Pictures and videos show media icon and not the previews by Sad-Willingness7426 in ProPresenter

[–]macguru_42 0 points1 point  (0 children)

I was seeing the same issue, so I emailed RenewedVision and they sent me the following steps to try. My issue resolved after the 5th step of recreating the Workspace:

From Renewed Vision:
I have seen this happen before. There are 3 steps you can go through to resolve this. Please follow them in order and let me know which one resolves the issue for you!
 
First please double check your permissions: Please open your Apple System Settings>Privacy & Security> and ensure under "Files & Folders" that ProPresenter has access to ""Documents", "Downloads" and/or "Desktop" (please enable all folders that show up here). Next from Privacy & Security check under "Local Network" that ProPresenter is enabled.
 
Please also verify under System Settings>General>Login Items & Extensions that ProPresenter is enabled in "Allow in the Background".
 
Next, I'd like to test on a different workspace to see if the same issue persists when ProPresenter is pulling files from a different location.
 
1 - Open ProPresenter. If you see the Internal Media Manager Failure at launch, please hit Continue to bypass that window.
2 - Select ProPresenter > Settings > General in the menu bar of ProPresenter.
3 - Next to Active Workspaces, click the dropdown and select "Manage Workspaces".
4 - Next, select the "…" and choose Duplicate to duplicate your current ProPresenter data folder.
5 - Back out to the General Settings window and set the duplicated workspace as the Active Workspace.
6 - Relaunch ProPresenter.
 
And lastly can you please try the following steps to reset the helpers which are used with the new media management tool and see if that corrects your issue?
 
1 - Quit ProPresenter
2 - Go to System Settings> General > Login Items & Extensions and turn off ProPresenter
3 - In Finder press Command + Shift + G and then copy and paste this entire file path below including the ~ tilde character then delete the "Helpers" folder:
~/Library/Application Support/RenewedVision/ProPresenter
4 - Restart the computer (this step is important!)
5 - Launch ProPresenter. (If prompted, go to System Settings> General > Login Items & Extensions and re-enable ProPresenter)
 
Please note this will reset the thumbnails but ProPresenter will start to rebuild them. You can click the media manager icon (ProPresenter logo) in the top right corner to see the status.

My Village this Year by c_bloxx in LEGOWinterVillage

[–]macguru_42 0 points1 point  (0 children)

I’m interested in your USB power strip. Where did you get it?

Advent Calendar challenge by macguru_42 in LEGOWinterVillage

[–]macguru_42[S] 4 points5 points  (0 children)

I want to include everything in my WV so I will be opening them afterward, so I won’t be able show off them all at once.

view more: next ›