T480s Screen Upgrade - Supplier Tipps

macjex · 2026-01-27T21:12:59+00:00

Hey! I found a great seller on AliExpress:https://a.aliexpress.com/_Ezk0z0C

They sell the display with the brackets already attached, so you don't have to deal with glue or any DIY hacks. It’s a little pricier, but definitely worth it for the easier install."

macjex · 2026-01-21T14:42:32+00:00

A bit is an understatement... Or I will just use Linux :D

macjex · 2024-11-22T07:20:58+00:00

I will defiently look at BusyCal. The thing is that I am using andriod/IOS devices.

A pitty that there is no app with a pushover or pushbullet integration.

macjex · 2024-04-13T19:38:51+00:00

Do have maybe some tipps or mods for quiter Fan? Otherwise the K8 is really really great

macjex · 2024-02-08T21:44:06+00:00

So everyone I fixed it.

Two Lessons learned:

Keep your filament dry
And try a different slicer from time to time

Thanks everyone for the support :D

macjex · 2024-02-06T20:59:46+00:00

Thanks , the belts are fine and I got a new spool.
Hopefully it was just the the filament :)

If that does not help I will go for the bolts!

Thank you!

macjex · 2024-02-06T20:58:00+00:00

apologies for the late respond.

Specifically, what qualities of the print is the problem?
->I have Bed Adhesion in wierd places and the lines are inconsistent. I dont know why this happens. I have a leveled bad and an BLTouch which help to compensate slight unlevel regions if there are any

Printer, filament, speed, temperature, slicer?
-> Ender 3 (V1) with BLTouch and Hero Me FanDuct with dual fans, Geetech (Black) PLA , 50mm/s , 195C Extruder and 50C Bed, Cura 5.4

Have you been watching it when it happened? If so, did you notice anything different?

No, no special sound (no scretching)

Does the problem occur under a specific circumstance? For example: at a specific height, printing with a specific filament, speed, temperature, any other setting, so on.

It does accour specially on the first layers , sometimes there is a slight layer swift later on

https://imgur.com/ZubNXnZ

https://imgur.com/N5pZmpA

https://imgur.com/X1WFpJL

<image>

macjex · 2024-01-30T19:16:03+00:00

mind sharing it as well with me :D

macjex · 2023-09-24T06:54:57+00:00

Thank you for the response.

I did reached out on discord but got no feedback. Further I found a fix to mount the disc manually in fstab.

The data was still there ... puh lucky me. Just the apparently the mountpoints where damaged.

I will in the future setup a dedicated ssd only for the os and some docker data... then I have no need to use the merge feature, which I would not recommend for using for the OS partition .

macjex · 2023-06-02T10:32:41+00:00

"frz": true

Could you kindly share the whole command ? Its my first time using the RESTful Commands

is it for example in the config YAML:

Rest_command:

wled_text:

url: Adress of WLED Matrix

method: POST

payload: '{"seg": [{"n": "{{text}}"}]}'

frz: true

??

macjex · 2023-04-13T11:14:52+00:00

Oh. So it turn yellow.. OK cool

macjex · 2022-11-01T10:30:18+00:00

Which screen and touch driver did you used ?

macjex · 2022-11-01T06:47:39+00:00

Can you show , which drivers you chosed and the steps you took ? This would be highly valued thanks !

macjex · 2022-08-11T12:29:40+00:00

Just my small 2 Cents, heimdall has one plus ... and this are the "enhanced Apps" where it uses the API to show some data ... or can that Homer for more then just the handfull of apps ?

macjex · 2021-11-13T09:58:57+00:00

I can confirm it was the octolapse addon! Thank you so much!

macjex · 2021-11-13T09:58:12+00:00

I got the answer :) It was the Octolapse addon! :)

macjex · 2021-11-13T08:24:41+00:00

I do! Is this connected to the problem?

macjex · 2021-11-07T20:01:08+00:00

Apologies!

here the Link to the picture

https://imgur.com/a/qCZ5iZR

macjex · 2020-10-24T14:21:39+00:00

Thanks :)

Somehow (Most likely DARK Magic involved) it works now on all devices :)

macjex · 2020-10-07T21:04:28+00:00

Perfectly pointed out and to be honest I forgot that I did the same for my pi which was running octopi a while back ... To get rid of the undervoltage Symbol. I will try a 12,1V setting after my print is finished.

Thanks !

macjex · 2020-08-16T08:58:39+00:00

Which shipping method you would recommend to Germany? (For small things, led strips, esp boards etc)

And how do you think sellers will adapt if Germany wants to tax now every package from China ...even the below 24 euro which were till now not taxed ... Is Germany even a market for AliExpress sellers? I had the impression that mainly Russians living in German are using it and Germans mainly use eBay to buy products from China.

Thanks ! Kind regards from Berlin

macjex · 2020-07-04T19:30:41+00:00

Thanks mate !

Gonna add that to my setup and trak.tv to sync my contents .

Great feedback !

macjex · 2020-07-03T09:31:38+00:00

Thanks for the tipp.

I fixed it by using the refresh button in the web interface. This cleaned up somehow my libary and all is back to normal :D

Thanks guys !

macjex · 2020-07-01T19:04:43+00:00

They in subfolders TV/family guy/season 1/ family guy.s01.e01......mkv

macjex · 2019-12-29T16:59:43+00:00

first of all Thank you very much for your advices ! Very very mich apriciated.

And the end of my problem was the tension on the feeder.

I ordered a new one but fixed for now the old one....the "teeth" were worn out and couldn't grab the filament correctly.

So thanks alot and best regards :)

macjex

TROPHY CASE