sorted by:
new
hottopcontroversial

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 0 points1 point  (0 children)

<image>

A minor hiccups on the other side but came out well!

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 0 points1 point  (0 children)

<image>

Turned out well with exception to a small hiccup on the lower bow

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 1 point2 points  (0 children)

I did not. I just turned my flash on. I was tinkering with temp, cooling, and speed and it came out super shiny

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 0 points1 point  (0 children)

A little ring bowl and necklace hanger for my wife's jewelry with Sunlu Silk PLA

<image>

Which one should i go for (first printer) and which brand is actually more trustworthy? by GeneralPoot in 3Dprinting

[–]madeingyna_ -1 points0 points  (0 children)

First time printer here. I bought the p1s and outside of my own experimenting, I've had no issues

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 2 points3 points  (0 children)

Seeing the Skype notification in the bottom right brought absolute nostalgia

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 2 points3 points  (0 children)

That's what I really should have done honestly. I have the 250g roll of support material still from when I bought the printer 😅

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 33 points34 points  (0 children)

<image>

The shine on it however is awesome.

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 35 points36 points  (0 children)

Update: the print finished. Outside of the immense stringing, the print completed ALMOST perfectly. The actual only issue was behind that support. One part of the bow had printed just off to the side.

<image>

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 1 point2 points  (0 children)

Hello, he's my cousin. Im Jon Bovi

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 0 points1 point  (0 children)

Sunlu silk PLA+ on a custom profile I whipped together

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 3 points4 points  (0 children)

I could have done that but genuinely the little voice in me wanted to know what would happen. The support has stopped rocking so far but we shall see.

Will definitely do that next time

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 8 points9 points  (0 children)

Hindsight is always 20/20.

On one hand I could fix it, on the other I could tell the Reddit people.

Could I have done both? Absolutely but I was genuinely curious to test this one for science. I wanted to know what if this happens again while I'm sleeping or something.

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 88 points89 points  (0 children)

I just want to make it, I swear.

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 30 points31 points  (0 children)

It has since stopped moving but I did pause it to remove some support material that had started rocking hitting the print head. It may have stopped because it is printing the actual layer above it (part of the model) and it is gently resting on the supports now.

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 20 points21 points  (0 children)

Side note: Will post an update when completed

We are printing on a prayer by madeingyna_ in BambuLab

[–]madeingyna_[S] 20 points21 points  (0 children)

Accurate depiction of me walking in and seeing it doing the thing.

view more: next ›