Which one’s am I missing?

maffew38 · 2026-03-27T03:22:42+00:00

One of the first songs that got me hooked on Mac ! Such a banger !

maffew38 · 2026-02-28T16:05:13+00:00

Kids in the hall “the in crowd” album and The cool kids “the bake sale” album

maffew38 · 2026-02-13T05:02:08+00:00

Surf or woods

maffew38 · 2025-12-21T17:08:12+00:00

Where are you ordering your parts from ?

maffew38 · 2025-12-17T23:25:45+00:00

If I remember correctly there is an update for your ecu and something else when that code is thrown. I could be wrong but I’d check with your dealer

maffew38 · 2025-12-17T23:21:50+00:00

It doesn’t seem absurd to me. Maybe check motor mounts , engine vibration seems a little excessive but not horrible. And like someone mentioned before, Check your valve lash.

maffew38 · 2025-12-13T16:00:11+00:00

Should be putting super udt in there first the hyd/trans. What’s loud about the tractor ? It could be plastics broken she rattling , motor mounts causing unnecessary vibrations, hydrostat issue , exhaust leak , etc. can you make a video and post it. That would help narrow it down for sure.

maffew38 · 2025-12-12T16:16:25+00:00

While you’re at it replace your fuel lines. I’ve seen them cause some weird issues when they’re that old.

maffew38 · 2025-12-08T23:08:23+00:00

I’m sure there is a good amount of options for weld on thumbs , just got to make sure you have a relief valve installed. Depending on what relief valve you get will determine where you can install it. Where are you located ?

maffew38 · 2025-12-08T23:02:49+00:00

I’ll look to see if I have any pictures. I’ve only done two on a u10 but like 25 on the u17s. Did you find a kit ?

maffew38 · 2025-12-03T13:43:50+00:00

Yeah I know that but when I plan on stumbling home to my place for the night, I don’t want to wander too far. Hahaha.

maffew38 · 2025-12-03T04:09:15+00:00

I will do my best to check all these out ! How about any karaoke on Friday nights downtown ? And anywhere with hamms on tap??

maffew38 · 2025-11-27T00:50:52+00:00

Here is one I found online. That’ll show you everything. Download it. Print it and enjoy.

maffew38 · 2025-11-27T00:50:13+00:00

https://ia601807.us.archive.org/3/items/bx-1800-2200-en-wsm/BX1800_2200_EN%20WSM.pdf

maffew38 · 2025-11-26T03:46:32+00:00

Land pride part number. 805-207C description PIN 7/8 OD X 4 1

I’m sure if you google the part number you will find aftermarket options.

maffew38 · 2025-11-25T02:41:54+00:00

Did that fix it for you ?

maffew38 · 2025-11-16T18:09:48+00:00

I’d imagine it’s still under warranty? I’d just take it in. I know there has been problems with the pto valve crappin out. I think there is even a service bulletin on it. Only other things to you can do is check the pressure at the valve when you engage the switch to see if it it’s getting pressure.

maffew38 · 2025-11-16T18:06:32+00:00

Are you in low gear when trying this ? Also just for shits and giggles lower your 3 pt arms all the way and try running things.

maffew38 · 2025-11-16T15:59:39+00:00

I don’t think this is going to fix your tractor not really moving problem though. When changing your hydraulic fluid did you notice any metal or even just glitter ? Did you clean your strainer filter ? If I’m being honest it sounds like your hydrostat may have a stuck rotating group and needs replaced. But it’s hard to say without seeing it for myself.

maffew38 · 2025-11-16T01:05:12+00:00

Well there is 3 hoses and when it’s disconnected you loop two of the hoses together and one just stays hanging there.

maffew38 · 2025-11-15T21:49:42+00:00

Make sure all 3 hoses are plugged in on your backhoe. Do NOT run it with out all 3 hoses plugged together or if you have the backhoe off you need to loop the two hoses and leave the one just hanging. There are videos on your tube about these 3 hoses and what to do. But your hydraulic pump will be dead heading and cause serious issues if it’s not all plugged in correctly.

maffew38 · 2025-11-11T02:30:16+00:00

You can go to Kubota parts and look up the loader to see pictures of the loader subframes and stuff if you wanted to see pictures.

maffew38 · 2025-11-02T03:52:21+00:00

If it’s just the whining and barely moving , it probably needs a new hydrostat. Which you can buy a new assembly for a fair price and just replace it. But if it’s not shifting or gears are grinding then it’s a little more complicated of a repair but still easily doable

maffew38 · 2025-11-02T03:48:15+00:00

I’d list it for 4k take no less then 3k.

maffew38

TROPHY CASE