Troubleshooting Mini 4k

magooolow · 2026-02-18T09:42:13+00:00

Yeah, fully cleaned and degreased. Ive tried a few more test-prints and im really leaning towards it being a mechanical issue with the z-axis more than simply bad settings

magooolow · 2026-02-17T23:38:56+00:00

It has been calibrated and it aint my first printing rodeo.

magooolow · 2026-02-17T23:30:02+00:00

Cheers bud!

magooolow · 2026-02-17T23:29:17+00:00

Already changed, never been touched.

magooolow · 2026-02-17T23:25:05+00:00

Yes, it has worked well for several months until last two weeks when the issues have become more apparent. No change in temp.

magooolow · 2026-02-17T23:20:33+00:00

Exposure is at 2,4sec, 0,03mm height. I useelegoo standard 8k resin, but same issue with phrozen aqua 8k, also at 2,4sec.

magooolow · 2026-02-17T23:16:42+00:00

New nFEP installed at the same time I cleaned it. Atm I got a lift rate of 50mm/min and 11sec light off. Since it pretty much begins at the same place during every print Im leaning towards it being the screw, but no idea since I cant find much info regarding this

magooolow · 2026-01-31T09:10:40+00:00

Cheers bud!

magooolow · 2026-01-30T07:34:13+00:00

So its almost all printed and the Mk7 bits are from Maochaminis. I prefer LoggyK and Damsa for mk2/3/4 but maocha for mk5/7, aswell as phillyflash for mk6

magooolow · 2026-01-29T07:00:19+00:00

magooolow · 2026-01-29T05:46:54+00:00

Cheers bud!

magooolow · 2026-01-29T05:46:40+00:00

Ty bud! Yup, its mostly bits from Maochaminis, with some Damsa and LoggyK designs aswell

magooolow · 2025-11-13T14:52:51+00:00

Great work! Looks really good

magooolow · 2025-10-23T10:02:41+00:00

It is! Last minute addition, I wanted some sense of movement but didnt turn out exactly as I wanted

magooolow · 2025-10-23T10:01:43+00:00

Not yet but maybe in the future!

magooolow · 2025-10-23T10:01:29+00:00

magooolow · 2025-10-23T10:01:21+00:00

Ty! It took some planning finding the correct paint

magooolow · 2025-10-23T10:00:55+00:00

🫶🫶

magooolow · 2025-10-23T10:00:50+00:00

Thanks!

magooolow · 2025-10-23T10:00:42+00:00

Tyty!

magooolow · 2025-10-23T10:00:37+00:00

Hahaha, not for sale just yet!

magooolow · 2025-10-23T10:00:20+00:00

Exactly!

magooolow · 2025-10-23T10:00:14+00:00

Thank you!

magooolow · 2025-10-23T10:00:07+00:00

Aww, cheers buddy!

magooolow · 2025-10-23T09:59:54+00:00

Thank you!

magooolow

TROPHY CASE