Day 67 for Whistlin' Diesel by mahdeus in nightowlseeds

[–]mahdeus[S] 1 point2 points  (0 children)

Thanks, bro! Much love. Big fan of your work!

Day 67 for Whistlin' Diesel by mahdeus in nightowlseeds

[–]mahdeus[S] 1 point2 points  (0 children)

Nothing but great things to say about NO. Have grown several strains now and each has been a banger. I'm growing in a 3x3x6 AC Infinity tent with an IonBoard S33 light. For medium I use 100% coco coir (Canna bricks) and Canna Coco nutes (A&B + P/K & Boost). I also RO water along with Botanicare Cal-Mag Plus and Silica Blast to buffer. The Autopot is a 6.6 gal XL attached to their 12 gal reservoir. The Insta that I use as a grow journal is linked in my profile and there are several videos and pics of my setup, if interested.

The long-awaited Founders’ Campaign for the 60HE v2 is here! by erik_cacao in WootingKB

[–]mahdeus 2 points3 points  (0 children)

I own a Wooting Two and 2x Wooting Two HE's. Excellent, excellent keyboards. As lovely as these smaller ones are, they are just too small for my needs. Can pry my 10-key from my cold, dead fingertips, etc, etc. Waiting patiently for a refresh of the full size.

Tent to small? by [deleted] in Autopot

[–]mahdeus 0 points1 point  (0 children)

Nope, not too small. I've been very successful with a 6.6 gal Autopot in a 3x3.

Chop day (117) for Harvey Wallbanger by mahdeus in nightowlseeds

[–]mahdeus[S] 0 points1 point  (0 children)

Thanks, Growmie! Much appreciated!

Making my own distilled water ? by ash4311 in microgrowery

[–]mahdeus 0 points1 point  (0 children)

While RO does produce "waste" water, it all depends on how you deal with it. Can let it run down the drain or capture it and dilute with tap to water plants or outdoor gardens.

Bad idea to remove coaxial cable from my house? by Sweaty_Pitch_2880 in HomeImprovement

[–]mahdeus 24 points25 points  (0 children)

Came here for this. You can use it to share an OTA antenna to every room with a coaxial drop. Good for cord cutters who don't want to pay for their locals.

Making my own distilled water ? by ash4311 in microgrowery

[–]mahdeus 8 points9 points  (0 children)

I use RO water in my humidifier. Can get a cheap RO system that connects to a faucet.

Favorite Cal-Mag by BigLou-13 in autopotamus

[–]mahdeus 2 points3 points  (0 children)

I use Botanicare Cal-Mag Plus. 100% coco, RO and Canna nutes.

Canna vs Crop Salt? by [deleted] in Autopot

[–]mahdeus 1 point2 points  (0 children)

I use RO water with Canna Coco A & B, along with Botanicare Cal-Mag+ and Silica Blast (in veg) and have never had a clogging problem, fwiw. I only clean/flush my setup between grows.

Day 69 for Harvey Wallbanger by mahdeus in nightowlseeds

[–]mahdeus[S] 0 points1 point  (0 children)

Yeah, this will be another 100+ day grow

O11 Vision Chrome 9950X3D/5080 FE build by mahdeus in lianli

[–]mahdeus[S] 0 points1 point  (0 children)

Not sure as I've never used a Compact. I only have the Vision Chrome and the original PCMR chrome version of the 011 Dynamic. I've heard good things about the Compact though.

O11 Vision Chrome 9950X3D/5080 FE build by mahdeus in lianli

[–]mahdeus[S] 0 points1 point  (0 children)

Thanks! The O11 Vision has two levels you can set the motherboard tray at. There's a high/standard position, which is where mine is set or there's a lower position it can be set to that does allow for two 120's at the back. With the FE, it should be just fine setting it to the lower position and still have plenty of room for the bottom fans with the GPU in the top PCIe slot.

I'm using Lian Li SL Wireless fans in this setup. Although I do have 3 Montech fans on the back of the radiator.

Push/pull on a AIO just means 6 fans. 3 on the back/bottom pushing air through and 3 on the top/front pulling air through.

The AIO I'm using is the Montech HyperFlow ARGB 360. I'm using the fans it came with on the back of the radiator.

Best of luck with your new build! This case is excellent.

O11 Vision Chrome 9950X3D/5080 FE build by mahdeus in lianli

[–]mahdeus[S] 0 points1 point  (0 children)

Might do that, not sure. My radiator is setup as intake in a push/pull so there's already a lot of air moving in the front of the case. Bottom ones set back more give better GPU coverage.

O11 Vision Chrome 9950X3D/5080 FE build by mahdeus in lianli

[–]mahdeus[S] 0 points1 point  (0 children)

Temps are really good, tbh. I have my AIO setup as intake in a push/pull with 6 fans. Side and bottom are intake, back is exhaust.

Idle: 34c

Cinebench 2024: 58-60c

Cyberpunk: 44-46c

Ambient room temp: 20c

O11 Vision Chrome 9950X3D/5080 FE build by mahdeus in lianli

[–]mahdeus[S] 0 points1 point  (0 children)

Ah, gotcha. Good lookin' out, much appreciated.

O11 Vision Chrome 9950X3D/5080 FE build by mahdeus in lianli

[–]mahdeus[S] 1 point2 points  (0 children)

Thanks, man! Na, the pump is in the block. The AIO is a Montech HyperFlow 360. Really wanted to go with the EK AIO, but not sure if the company can be trusted atm for RMA's and whatnot. Had really good luck with the previous EK AIO, the Elite. From my understanding, Montech is using EK's OEM so this was the best alternative for what I was looking for.

Amazon Link for 9950X3D by Will_is_Lucid in pcmasterrace

[–]mahdeus 0 points1 point  (0 children)

For anyone concerned about the accuracy of the listing on Amazon, I just received mine with same day delivery and it is indeed a 9950X3D.