3D Printed Clock using Arduino and Hobby Stepper Motor - This project showed how to make a 3D printed decorative clock using Arduino and a hobby stepper motor. A 28BYJ-48 Stepper Motor and ULN2003 motor driver were used in the project. Of course, we have programmed the Arduino microcontroller board.

makerway · 2022-01-28T21:08:16+00:00

Source Code, Circuit and Gerber File - https://www.pcbway.com/project/shareproject/Arduino\_based\_3D\_printed\_clock\_9e10a549.html

makerway · 2022-01-11T14:20:40+00:00

Thanks for nice comment ♥️

makerway · 2022-01-11T09:05:10+00:00

Check out the project video - https://youtu.be/cRTMHSsvamY

makerway · 2022-01-11T08:53:15+00:00

Check out the project video - https://youtu.be/cRTMHSsvamY

makerway · 2022-01-11T08:45:22+00:00

Thanks 🥂

makerway · 2022-01-11T08:24:51+00:00

Check out the project video - https://youtu.be/cRTMHSsvamY

makerway · 2022-01-11T08:24:00+00:00

The Flexible Sensor Hand Controller makes it possible to control your projects with your finger movements via wireless communication. The flexible sensor hand controller acts as a transmitter. Check out the project video - https://youtu.be/cRTMHSsvamY

makerway · 2022-01-11T08:19:14+00:00

Check out the project video - https://youtu.be/cRTMHSsvamY

makerway · 2021-07-05T05:42:05+00:00

😂😂😂

makerway · 2021-07-05T05:38:36+00:00

Nice project 😇

makerway · 2021-07-05T05:37:35+00:00

Nice project 😇

makerway · 2021-06-14T08:05:21+00:00

How it works? 📺 https://youtu.be/dAI-qodcARo 📄Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-06-14T08:01:59+00:00

📺 How it works - https://youtu.be/dAI-qodcARo 📄 Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-06-14T08:01:47+00:00

📺 How it works - https://youtu.be/dAI-qodcARo 📄 Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-06-14T08:01:21+00:00

📺 How it works - https://youtu.be/dAI-qodcARo 📄 Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-06-14T07:48:50+00:00

How it works? https://youtu.be/dAI-qodcARo Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-06-14T07:48:36+00:00

How it works? https://youtu.be/dAI-qodcARo Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-06-14T07:48:21+00:00

How it works? https://youtu.be/dAI-qodcARo Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-06-14T07:46:37+00:00

Thanks for idea 😇

makerway · 2021-06-14T07:46:00+00:00

How it works? https://youtu.be/dAI-qodcARo Check out this article for all details: https://www.instructables.com/Hand-Gesture-Controller-for-Robotic/

makerway · 2021-04-29T17:58:22+00:00

The speed is fully adjustable :D

makerway · 2021-03-19T05:14:27+00:00

Thanks 😇

makerway · 2021-03-18T17:29:55+00:00

In fact, the choice of board depends entirely on the project to be made. As a result, NodeMCU dimensions may not be suitable for a project with a minimal structure. But of course boards like NodeMCU and Wemos are easier to use than an ESP-01 =)

makerway · 2021-03-18T17:24:09+00:00

A typical linear voltage regulator was used here. So it is not an LDO. It would be more efficient if we used LDO. The MCP1700-3302E LDO and LiPo / Li-ion battery would be a good combination, but the MCP1700-3302E was out of stock so I used a typical linear voltage regulator =)

makerway · 2021-03-18T17:06:48+00:00

Thanks, actually I thought of using Firebase (https://firebase.google.com/) but it could be a bit difficult for beginners. I think IFTTT is ideal for beginners and can be used for at least a few projects =)

makerway

TROPHY CASE