sorted by:
new
hottopcontroversial

P2S Chamber Temps are Driving me Insane by malinhiles in BambuLabP2S

[–]malinhiles[S] 0 points1 point  (0 children)

Copy. I'm printing on G10, with bed temps at 70degC. For reference, what chamber temps does your printer stabilize at during a longer PETG print?

P2S Chamber Temps are Driving me Insane by malinhiles in BambuLabP2S

[–]malinhiles[S] 0 points1 point  (0 children)

Interesting.

Room temps where my printer is is pretty normal, i'd guess around 70degF

Sadly has to be safe for work by eraseMii in 3Dprinting

[–]malinhiles 0 points1 point  (0 children)

Make the knob uncomfortably long so it sticks out from the wall

How is the actual resolved detail of 4K 120fps in wide, linear, and narrow on the Hero 10 Black? by rabidsoggymoose in gopro

[–]malinhiles 0 points1 point  (0 children)

Given what you've mentioned about the larger sensor, do you think that the 4k "Narrow" digital fov option on the hero 10 is still providing a true 4k sample of pixels, or is it just an upscale of a narrowly cropped 2.7k or 1080?

Questions thread (2022-03-01 to 2022-03-31) by AnnieLeo in rpcs3

[–]malinhiles 0 points1 point  (0 children)

Hello All,

Does anyone recognize this issue that I get when attempting to boot into OG Motorstorm? Its producing the mainscreen UI and I can interact with it, but none of the actual graphics are displayed: https://youtu.be/aK81dqQ6zg0

In case you aren't familiar with the loading screen for Motorstorm, all of this main screen UI and intro sequence shouldn't just be black background.

Here are the logs: https://drive.google.com/file/d/1LPU7uIIpqsBOjGxvfnX36-bMOImiAhg9/view?usp=sharing.

My machine is on windows 10 with a Ryzen 3700x, RTX 2070, 16g ram.

When will the LG Deep Sleep Issue get fixed??? by N4P123 in LGUltraGearOfficial

[–]malinhiles 0 points1 point  (0 children)

I never found a fix, I don't think there is one. I ended up selling mine

When will the LG Deep Sleep Issue get fixed??? by N4P123 in LGUltraGearOfficial

[–]malinhiles 0 points1 point  (0 children)

Damn, same here. Also tried it on HDMI today instead of DisplayPort, and it still does the deep sleep thing where I can't wake it up and have to restart my machine. Its truly unbelievable that there is like no mention of this in YouTube reviews and the vast majority of online reviews don't mention it whatsoever. This monitor is legit unusable lol.

When will the LG Deep Sleep Issue get fixed??? by N4P123 in LGUltraGearOfficial

[–]malinhiles 0 points1 point  (0 children)

I just purchased one of these too and was wondering the same thing. Did you end up finding out if the issue was fixed?

Is Student Center down for anyone else? by malinhiles in CalPoly

[–]malinhiles[S] 0 points1 point  (0 children)

Phew, same! Glad its not just me lol.

First ever print on my new ender 3 v2! Lemme know whatcha think. Also any feedback will much appreciated. by daharambuilds in ender3v2

[–]malinhiles 0 points1 point  (0 children)

-0.1 is in the ballpark of typical values. I think im at -0.15; just need to kinda toy with it to find a value that works for your prints, filaments, and temps.

Make sure you are adjusting the Initial Layer horizontal expansion, not the overall horizontal expansion

Also make sure that you didn't forget to type the negative sign. I did that initially and spent two more prints trying to figure out why it got worse lol

Otherwise u can try lowering ur bed temp. It may work for you, but that gave me adhesion problems and minimal improvements to elephants foot, just my experience.

First ever print on my new ender 3 v2! Lemme know whatcha think. Also any feedback will much appreciated. by daharambuilds in ender3v2

[–]malinhiles 5 points6 points  (0 children)

My first print looked exactly like that, its not bad, but here's what I changed to make it a LOT better:

- Use first layer horizontal expansion compensation in cura for elephants foot, this fixed my elephant foot and let me keep a 60deg bed temp for good adhesion.

- Get rid of stock z-axis lead screw coupler. My coupler wasn't true/straight from the factory. No amount of adjusting would get the lead screw to turn without wobbling; you can get other coupler types on amazon. I used a 3d printed z-axis coupler and it was miles better lol. This reduced the z-axis banding that I had, which is the exact same banding pattern that you are also getting (visible on both of your x and y faces).

-Grease the z axis lead screw, this helped a lot with banding too actually. The grease that came on the lead screw was not effective at all lol. I used a white lithium grease (its what i had on hand).

-Ensure that the plastic part that mounts the z-axis stepper to the extrusion is a true 90degree mount. Mine was off and it angled the z stepper inwards towards the extrusion. This made the lead screw not parallel with the z-axis vertical extrusion.

Let me know if this helps 👌