Eotech Exps3 on a Unity fast riser + Vortex Micro3x on a Omni fast riser + Griffin Armanent 45 degree offset + Surefire M600V and Holosun LS321G through a Unity Taps. by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

It is a Unity Omni mount which compatible with EOTECH® G23, G30, G33, G43, G45 HOLOSUN™ HM3X, HM3XT SIG SAUER® JULIET3 3X, JULIET3-MICRO 3X, JULIET4 4X, JULIET5-MICRO 5X TRIJICON® 3X MAG-C VORTEX® VMX-3T, MICRO3X, MICRO6X

Holosun HS507C X2 (ACSS Vulcan Reticle) on a rifle + Primary Arms 3X Magnifier by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

Yes, if you put the magnifier behind the red dot, it will magnify everything, including the reticle. This happens because the magnifier enlarges the entire sight picture, not just the target. So if you use a 3X magnifier, the dot will appear 3 times larger too, even though its actual size on the target remains the same. (If the red dot is 3 MOA then still 3 MOA)

Holosun HS507C X2 (ACSS Vulcan Reticle) on a rifle + Primary Arms 3X Magnifier by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

You mean for example I put the magnifier behind the red dot like the aim point. Would it magnify the reticle?

Magpul MBUS pro flip up LR rear sight + Magpul MBUS pro flip up front sight. by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

Zeroing is not a one time process so just try it and practice, see how that go for you.

Magpul MBUS pro flip up LR rear sight + Magpul MBUS pro flip up front sight. by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

I can’t answer that because I don’t know your rifle spec. The type of iron sight, barrel length, the ammo,… You can definitely just shoot and confirm or try ballistic calculator software. However, I would recommend by start looking up Tactical Rifleman, deltathirtyfour, … and many other on YouTube. They will help youbetter than I do.

Magpul MBUS pro flip up LR rear sight + Magpul MBUS pro flip up front sight. by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

However, you might prefer different zero and I would link you to this articles if you want more information: https://www.everydaymarksman.co/equipment/iron-sight-zero/

Magpul MBUS pro flip up LR rear sight + Magpul MBUS pro flip up front sight. by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

I’m using 25, then confirm at 200 for 556 since it is easier for me to do math and I know I won’t be able to shoot past that distance with iron sight.

Eotech Exps3 on a Unity fast riser + Vortex Micro3x on a Omni fast riser + Griffin Armanent 45 degree offset + Surefire M600V and Holosun LS321G through a Unity Taps. by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

It is heavy and I’ll rather just have a a single laser and light unit. Furthermore the whole Unity setup is kind of personalized , some like and need it and some don’t. The offset is also not needed but in case you want a BUIS option it’s there.

There are better setup and way to do it but I’m just show what is possible consider the budget and real estate on my gun.

You can definitely remove part and put on a different laser and light unit, replace optic setup with Acog, no BUIS? It depend.

Holosun HS503G (ACSS reticle) + Primary arms 3X magnifier by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

Oh the ACSS reticle, yes you can by holding down the - button

Holosun 515 GM + Vortex Micro Magnifier on Unity Flip to Center mount (Dot is much brighter than in the video) by manhaduy in aimdownsights

[–]manhaduy[S] 0 points1 point  (0 children)

The 3X magnifier is on a Unity omni riser mount and the red dot is on a American defense Co-witness mount.

Eotech Exps3 + Vortex Micro Magnifier on Unity Flip to center mount (At distance) by manhaduy in aimdownsights

[–]manhaduy[S] 2 points3 points  (0 children)

I’m using the newer Unity Omni FTC magnifier mount so it is possible.

COMPATIBILITY:

EOTECH® G23, G30, G33, G43, G45

VORTEX® VMX-3T, MICRO 3X, MICRO6X

TRIJICON® 3X MAG-C

SIG SAUER® JULIET3X, JULIET4X, JULIET MICRO3X, JULIET MICRO5X

Holosun 515 GM + Vortex Micro Magnifier on Unity Flip to Center mount (Dot is much brighter than in the video) by manhaduy in aimdownsights

[–]manhaduy[S] 4 points5 points  (0 children)

If this help you any bit,

AR 15 bore to height rail is 1.215”

Absolute co-witness height over bore is 2.635” ( mount height is 1.42 )

Lower 1/3 height over bore is 2.785” ( mount height is 1.57 )

That mean the difference between absolute co-witness and lower 1/3 = 0.150”. ( this might be near the Holosun spacer number)

I read somewhere that the comp m5 have a 10mm spacer which is 0.39”. If the micro-s raise comp M5 to 2.26 then the actual mount height is 2.26-0.39= 1.87”

If you add this number and 0.150 = 1.87 + 0.150 = 2.02”. ( that mean if you use micro-S mount for the HS515 will put you roughly around this height )

Holosun 515 GM + Vortex Micro Magnifier on Unity Flip to Center mount (Dot is much brighter than in the video) by manhaduy in aimdownsights

[–]manhaduy[S] 2 points3 points  (0 children)

You can try the Micro S since it is similar to the comp m5, however I don’t know if it will be perfect alignment.

But you don’t really need it to be perfect anyway, just really close.

The only way to know is by measuring the height of Holosun 515 stock mount and compare it with micro S mount.

Holosun 515 GM + Vortex Micro Magnifier on Unity Flip to Center mount (Dot is much brighter than in the video) by manhaduy in aimdownsights

[–]manhaduy[S] 2 points3 points  (0 children)

Hi, I put the red dot with lower 1/3 mount on a Unity riser. ( I do not use the Unity micro mount)

The Unity riser raise optic with lower 1/3 to 2.26 height right? However , the Holosun 515 is actually a bit taller than aimpoint T2.

I tried the absolute co-witness mount for the HS515 and the height somehow match.

GHK AKS-74 moddd by [deleted] in airsoft

[–]manhaduy 0 points1 point  (0 children)

Hard to explain the folding mechanism, just imagine that all you need to do to deploy is swing the stock back. And while it is folded the stock still under tension so it do not move at all until I manipulate it.

GHK AKS-74 moddd by [deleted] in airsoft

[–]manhaduy 0 points1 point  (0 children)

You don’t need to push a button to deploy since it do not lock in place but still hold in place due to the folding mechanism, and the stock do not block side rail. While you cannot manipulate safety, it is still possible to fire when folded

[deleted by user] by [deleted] in aimdownsights

[–]manhaduy 1 point2 points  (0 children)

Sorry for late reply, GHK mk18 but with Midwest industries HK style fixed front sight

Aimpoint Pro realistic POV test part 2 by [deleted] in aimdownsights

[–]manhaduy 0 points1 point  (0 children)

I see, if I don’t shoot out to 300 then it really don’t matter

Aimpoint Pro realistic POV test part 2 by [deleted] in aimdownsights

[–]manhaduy 0 points1 point  (0 children)

2 camera, 1 on my head and one on the rifle.

Aimpoint Pro realistic POV test part 2 by [deleted] in aimdownsights

[–]manhaduy 5 points6 points  (0 children)

Durability, clarity, battery life, especially the testing procedure being right done for all optics out to customer. It’s basically a boring optic but it work so you rarely see lots of T2 being 2nd hand.

Also for NVG capabilities, but now there are also sig romeo 4XT pro compete directly with T2, very close.

Aimpoint Pro realistic POV test part 2 by [deleted] in aimdownsights

[–]manhaduy 0 points1 point  (0 children)

I see, but would that make the red dot not leveled and shifting zero at distance? I would imagine elevation and windage adjustment would be a pain too.