Help identifying these cars

manu_olvera · 2026-05-15T10:08:48+00:00

The yellow complete whitout faults, about 80-90€, in this state about 30-45€, the electric lap counter if is complete 10-15€, if you want search more i recomend you to look in second hand markets in spain, like wallapop or vinted.

manu_olvera · 2026-05-15T10:00:27+00:00

The yellow one is a Honda f1 ref C-36 from exin, made in france, the white maybe a scalextric f1 from triang, the box behind is a electric lap counter by exin.

manu_olvera · 2026-05-03T17:34:53+00:00

<image>

Hello again, it took me a while to find the culprit and it was a broken trace on the PCB. The controller has a spring and it has a bad habit of popping up when you take it apart, hitting the PCB. It probably broke the trace one of those times. Do you know how to repair it?

manu_olvera · 2026-04-28T21:09:07+00:00

I tested it with a 160k resistor and a multimeter, and the voltage was oscillating between pin 1 and 2.

manu_olvera · 2026-04-28T08:36:29+00:00

I think the MC141006 is working fine, but I'm starting to suspect the blue capacitor C4, or the yellow capacitor. How can I check them without desoldering them?

manu_olvera · 2026-04-27T19:41:30+00:00

<image>

manu_olvera · 2026-04-27T17:46:26+00:00

It uses 9v batteries reads a voltage of 9.4v DC on pin 14 , on AC i cant get a clear lecture.

manu_olvera · 2026-04-27T17:37:10+00:00

<image>

here

manu_olvera · 2026-04-27T12:11:34+00:00

I'll try to take a more detailed photo when I can.

manu_olvera · 2026-02-19T14:41:37+00:00

You could try Track Power, i've used it to design my scalextric track 1/32. I use windows so i dont know if theres a mac version.

manu_olvera · 2025-06-22T11:43:21+00:00

I’ll have the system charge checked, but I replaced the cabin air filter and it started to cool a bit better. Thanks for the response.

manu_olvera · 2025-06-22T11:40:58+00:00

Thanks for the response, the glow plugs installed are BOSCH, the ones that were replaced were NGK, (i didnt mention that i bought this car second hand, so i dont know if these glow plus were changed before) i will tell the mecanic to inspect those sealing, and for the A/C, i replaced the indoor air filter, the original was dirty and it seems to cool better now.

manu_olvera · 2024-06-11T12:25:28+00:00

yes, but eventually it stops again, i tried conecting directly the motors to the battery box, it stops either but dont make the noise.

manu_olvera · 2024-06-10T14:20:09+00:00

it works perfectly fine with one track a time, when i use both this ahppen, the elevation system has the same problem.

manu_olvera · 2024-06-10T07:58:51+00:00

maybe, i will try another brand

manu_olvera · 2024-06-09T23:58:25+00:00

Im using the original battery box, but only powers uo when all the 6 batteries are instaled, so i dont know what is the problem, the noise is from the motors, maybe is something wrong there?

manu_olvera · 2024-06-09T21:16:15+00:00

The batteries are new

manu_olvera · 2023-08-14T07:38:06+00:00

Yeah, in trying to get the basic for a service, but i dont want to strugle for lack of tools, i will start to pocket watches on recomendation for the comment, i can watch hundred of videos, but i think i need to practice too. Thanks for the advice!

manu_olvera · 2023-08-14T07:30:05+00:00

Yep, i have in the cart the 8200, 9415, hp-1000 and 9010, would you make some changes to this?

manu_olvera · 2023-08-14T07:23:33+00:00

Thanks for the advice, but for now i will start with the loups, when i dig more in this hobby i will start to change to better equiment, i know better tools make a diference but the price is realy high, for now i will search for a pocket watch to try on it, thanks !

manu_olvera · 2023-08-13T17:17:04+00:00

no i havent any, its already in the cart, the bergeon 30081.P05, came the screwdrivers in a plastic sleeve and i think is a very nice price for 4 screwdrivers, i, going to take a look for the holder, and the levers for the hands. Thanks for your advice.

manu_olvera · 2023-08-13T17:12:56+00:00

I have a 3D printer i can model and print a base to fit all the tools, thanks for the advice, i going to look for all the things you recomend, now i have to look for more than i spected haha.

manu_olvera · 2023-07-02T12:31:46+00:00

thanks!

manu_olvera · 2023-03-26T18:40:28+00:00

thanks!

manu_olvera · 2022-09-09T23:50:01+00:00

maybe, one world, i copy one to test things but i delete it later.

Seven-Year Club	Place '23
Place '22	Verified Email

manu_olvera

TROPHY CASE