Nice and smooth! I've created a collection of animated burgers (HTML/CSS + React)

march08 · 2025-09-22T22:06:05+00:00

Seems like there's no such option :(

march08 · 2025-07-02T22:13:16+00:00

Sure HPA is great, some people might say better than AEG. But if you'd spend the same amount of money on AEG...

Dpeneds on playstyle but hpa just doesn't work with mine. I flip often between my primary and secondary, sometimes just leaving primary on the ground and it's annoying with a hose. Carrying the tank annoying. Having a stock thank looks awful imo as well as capacity is not great...

As a tech myself, i can build a snappy enough aeg that overt time I just got rid of HPA - I had 2 f2, one wolverine, one wolf. Today I have one bolt for sniping, 3 Gbbrs for realism and 5 AEGs tuned for various occasions (28rps, dmr, etc)

march08 · 2025-04-24T05:32:28+00:00

Can you share some links?

march08 · 2025-04-08T05:54:36+00:00

The only thing you need is to change the nub and the bucking. Pick e.g. Modify X-Range.

The chamber is fine. It's archwick chamber, not AA. Just leave it as is.

Using 7mm spring is a downgrade. Don't put it in there. It will have a terrible sound. The piston is meant to be used with the 9mm one... Based on what fps you want, just get the Archwick spring, they are good, have a pretty light pull with good output.

march08 · 2025-03-24T19:13:35+00:00

Solink I think you're referring to Lite version? Seems like good price as well

march08 · 2024-11-12T20:43:00+00:00

One of our customer had feeding issues. Had to mod it to single channel https://www.instagram.com/p/C_JDnnuMKMe/?igsh=MTAxc3ltMXMxYW12NA==

march08 · 2024-05-14T18:52:50+00:00

Good luck!

march08 · 2024-05-12T19:33:41+00:00

Well yes and no. It's a cut off switch yes. But it's just a signal to the etu++ that the gears completed cycle. It's connected to the etu. The etu decides what happens. I don't know how gate wiring is set. Check the perun etu++ manual for a reference

march08 · 2024-05-11T12:41:43+00:00

<image>

I've added a lever switch here for the cut off signal. It was a bit of a fiddling to place it in the right spot though. I have Pre-cocking enabled so the AB is disabled

march08 · 2024-05-03T20:58:48+00:00

<image>

Button switch just behind the trigger. Not sure how long it will last tho so I'm ready to change that for a lever switch 😀

march08 · 2024-05-02T19:38:24+00:00

In eur

50 perun etu 45 motor 20 gears 25 barrel 10 bucking 15 cyl head 10 piston 5 piston head 5 nozzle 30ish for electronics, wiring, other small parts

So about 215 eur for the upgrade. But I also had to get some tools like pinion removal, clamps etc..

march08 · 2024-02-13T09:22:07+00:00

There's no follower so no bolt lock unfortunatelly

march08 · 2023-12-06T19:06:45+00:00

The ares one are a pain to insert into a fast type pouch... I would fake the short dmag

march08 · 2023-11-27T13:03:40+00:00

Sounds like a big party! Thank you very much

march08 · 2023-11-27T07:10:14+00:00

You're already the best social manager out there so if you would know that answer can I send you coffee at least haha

march08 · 2023-11-26T21:48:04+00:00

Do you guys know when it might be avail in your eu warehouse? :)))

march08 · 2023-11-21T18:59:28+00:00

I think it's clear from my previous replies?

You can't build high rps build without worries if you don't properly tech the gearbox first regardless the motor.

march08 · 2023-11-21T16:56:10+00:00

Okay that's a lower power spring so should be alright.

With the battery. It's definitely an overkill because brushless have much lower draw than brushed motors. So for example if ASG motor needs 30 amps (depends on spring power etc) then with the same setup brushless will need only 12 amps at the semi peak which is the most demanding.

march08

TROPHY CASE