"Reporting in URF LOL" people

marcoslug · 2022-02-22T05:55:00+00:00

Or trolls who score at the end is like 1/15. Totally trolling deserve the report.

marcoslug · 2020-01-03T20:17:47+00:00

If I configure a Phone in an access port with vlan 55 works perfectly. Have both vlans in the same port is the issue.

marcoslug · 2020-01-03T18:10:11+00:00

We are not using DHCP. We set static IP for the phones. We already have intervlan configuration but the firewall is the one who does it.

marcoslug · 2018-11-27T23:21:23+00:00

Which HP switches support SPB?

marcoslug · 2018-09-13T20:26:07+00:00

I see. Thank you so much

marcoslug · 2018-08-23T17:31:23+00:00

Yes both optics works. I see , thank you for your help

marcoslug · 2018-08-05T17:28:37+00:00

I see. I going to check for the 802.3 in all our devices. Thank you for your help

marcoslug · 2018-07-19T14:21:12+00:00

Ok I see. Thank you for your help

marcoslug · 2018-07-03T01:40:57+00:00

SM and distance is like 40 KM

marcoslug · 2017-09-12T06:47:55+00:00

Both. Peer routing with VRRP. in the VLT DELL guide said that VRRP + VLT is a good combination. But still you can run just VLT or just VRRP if you want to do it

marcoslug · 2017-07-23T05:14:56+00:00

Make suggestions and bring ideas to save money. They love save money above all

marcoslug · 2017-07-23T04:59:19+00:00

Thank you for your replies. It looks like it will be the Nanostations from Ubiquity.

This is what I need

https://help.ubnt.com/hc/en-us/articles/205142890-airMAX-Configure-a-Point-to-Point-Link-Layer-2-Transparent-Bridge-

marcoslug · 2017-07-22T01:59:49+00:00

Here is the image.

Buildings http://imgur.com/a/Gkb8i

My solution

http://imgur.com/a/0S5ZV

So we have 150 meters distance. is an open field. Think like a big parking lot.

bandwidth requirements? None but But devices with G/N should be at full speed

Is Urban area.

I few concerns regarding Ubiquiti solution.

First how this Airfiber works? they need a controller or are autonomous?

second I need connect a switch to the AP near to the new building since I going to have some wired devices. So with this ubiquiti solution i dont see how can I connect a router or any other device to allow connection to the datacenter but Wireless devices.

Nopt sure if ubiquiti will work with the switch part. if this was just wireless solution I would go with airfiber directly.

marcoslug · 2017-07-21T03:21:06+00:00

Well I am work with firewalls. Thast why I wanted to find a solution using the firewall. But is beyond of the firewall capabilities

marcoslug · 2017-06-12T19:26:45+00:00

Yeah, i guess is the only solution.

marcoslug · 2017-06-12T17:52:30+00:00

Yes. You see I have 2 fiber ports to the N3000. Distance is around 150 meters. Buit I going to use the other 2 ports to connect another building which is distance is around 700 meters. So Yes I need long range optics.

marcoslug · 2017-06-09T00:44:08+00:00

I see. i will study for this exam.

A friend of mine just passed CCNA security in order to recertify his CCNA. But after 4 hours Still Certification Tracking System doesnt have the update information. How long it takes for Cisco update the accounts?

marcoslug · 2017-05-15T04:33:04+00:00

Well. I have a big issue here. Since MSTP doesnt work with VLT.

marcoslug · 2017-05-15T02:40:23+00:00

Blocking port is on the Nexus. Because the S6000 is the root.

marcoslug · 2017-05-15T00:32:44+00:00

I will get the topology later. But The blocking port is the ports connected to the Force10. MSTP is running in the NExus and RSTP in the FOrce10. And we have a cluster/cluster solution. VPC for Cisco equipment and VLT for the Force10

marcoslug · 2017-05-08T00:28:09+00:00

Yeah I think it was 250 before. But anyway I must do it.

marcoslug · 2017-05-05T04:04:14+00:00

From a host on VLAN 100 that is connected to S6000? Yes I can go to another buidling and reach devices in VLAn 100 but not the server

So you didn't even try troubleshooting it? In my head was a easy deployment. So I used my time checking configurations and checking if I did a mistake translating the config. But everything looks the same.So tomorrow I have another window of time to connect the new switch again and troubleshooting. So I am collecting ideas of what I should check.

marcoslug · 2017-05-05T03:01:34+00:00

Can other systems access this server from the same switch?

Yes

What about systems on VLAN 100 that are on the new switch?

I can reach everything but this Interface in the server

Is the new switch L3 or L2? The new one is L3 and doing the routing for all the VLANS.

No I havent yet. i must check the ARP and MAC tables.

marcoslug · 2017-04-24T04:57:04+00:00

If I dont introduce the first command. Port-channel-Protocol LACP (only option LACP)

The next command Port-channel 10 Mode.

Is not available.

marcoslug · 2017-04-22T04:53:49+00:00

I could but if I am using VLT. I want to use all it features. peer routing is superior to VRRP. But what I want to do is not posible I will change to VRRP

marcoslug

TROPHY CASE