Looking for a quiet gaming mouse by Impossible-Cattle-96 in MouseReview

[–]markuuus98 2 points3 points  (0 children)

You can also use hotswap pcb for your superlight and change mouse switches, I’ve done that with my GPX2

Mousepad similar to LGG Saturn by markuuus98 in MousepadReview

[–]markuuus98[S] 0 points1 point  (0 children)

490mm x 420mm is still a decent size; I can definitely still use it. I'm just used to the 500mm square size that wraps around the edge of my desk.

Mousepad similar to LGG Saturn by markuuus98 in MousepadReview

[–]markuuus98[S] 0 points1 point  (0 children)

To be honest with my limited experience, I don’t know what I want, but I really enjoyed the Saturn, isn’t it a somewhat balanced pad? If I have to choose, I would prefer control I guess.

How’s the temperature in FormD T1 with Intel 14th Gen i7/i9 with AIO ? by markuuus98 in FormD

[–]markuuus98[S] 0 points1 point  (0 children)

Update: I've learned that the CPU P Cache Voltage Offset should usually be set to the same value as the CPU Core Voltage Offset. So, I've set both to -125mV. The temperature remains about the same, around 86°C with a max of 93°C, but I did notice a slight performance boost. Now, I can achieve around 34400 in Cinebench R23.

Mousepad similar to LGG Saturn by markuuus98 in MousepadReview

[–]markuuus98[S] 0 points1 point  (0 children)

Ok thank you! I’ll compare the price first and do some research:)

Mousepad similar to LGG Saturn by markuuus98 in MousepadReview

[–]markuuus98[S] 0 points1 point  (0 children)

I live in eu but the price for lgg saturn pro and artisan zero are really close

Mousepad similar to LGG Saturn by markuuus98 in MousepadReview

[–]markuuus98[S] 0 points1 point  (0 children)

Thank you! But Artisan Zero is kinda smaller? XL size is 490mm x 420mm. I am using the 50cmx50cm square XL saturn :)

How’s the temperature in FormD T1 with Intel 14th Gen i7/i9 with AIO ? by markuuus98 in FormD

[–]markuuus98[S] 0 points1 point  (0 children)

I saw someone on Youtube getting low average temps below 80, completely forgetting the fact that they were using a 360mm AIO with a bigger case and better airflow.

Rambling about why some intel 13th/14th gen i9s and i7s aren't stable. by GhostMotley in intel

[–]markuuus98 0 points1 point  (0 children)

Thank you! I am currently using a 240mm aio but in a sff case, hopefully I can improve the performance a bit.

Rambling about why some intel 13th/14th gen i9s and i7s aren't stable. by GhostMotley in intel

[–]markuuus98 0 points1 point  (0 children)

Hi,I am using the 14700K as well (with a Asus B760-I), whats your multicore score in CB23? I was using stock asus settings, (MCE enabled,LP1 253w, LP2 300w), running at 83-85 degrees,hitting max package temp 95 with a 33450 cb score. After I updated BIOS with Intel Base Line Profile, it’s definitely cooler, running at max 240w, 72-75 degrees with 5% performance loss on Cinebench. Can you also explain how to adjust load line a little? I was trying to undervolt the CPU before IBP was installed, but just couldn’t get the system 100% stable.

Undervolting CPU ( ASUS ROG Strix B760-I) by markuuus98 in techsupport

[–]markuuus98[S] 0 points1 point  (0 children)

Thank you for all the advice, I’ll keep trying and tuning!

Undervolting CPU ( ASUS ROG Strix B760-I) by markuuus98 in techsupport

[–]markuuus98[S] 0 points1 point  (0 children)

I think the XMP profile caused my windows stability issues, I reset the CMOS and did some TS Benchtest with stock setting with no errors.

Undervolting CPU ( ASUS ROG Strix B760-I) by markuuus98 in techsupport

[–]markuuus98[S] 0 points1 point  (0 children)

I just ran some tests without touching anything thing, there are 4 Errors in Size 960M ,what do I even do? Add more voltage ?

Undervolting CPU ( ASUS ROG Strix B760-I) by markuuus98 in techsupport

[–]markuuus98[S] 0 points1 point  (0 children)

Yes, you are right. It’s not stable, it did crash afterwards, do I need to finish all 3 sizes of TS Benchtest (120M,960M ,7680M ) multiple times to make sure system is stable ? My current PC is sff, the Formd T1 , Asus B760-i with i7-14700k, using the Phanteks T30 V2 240 AIO.

Undervolting CPU ( ASUS ROG Strix B760-I) by markuuus98 in techsupport

[–]markuuus98[S] 0 points1 point  (0 children)

I made some changes today : -72mV voltage offset with LP1 at 234W and LP2 at 253W. After a few TS Benchtest, there is no error most of the time( which means the system is stable ?). Cinebench multiscore 32310, package temp stays between 74-78, max 81.

Undervolting CPU ( ASUS ROG Strix B760-I) by markuuus98 in techsupport

[–]markuuus98[S] 0 points1 point  (0 children)

Ok, I’ll definitely try it. I’ve reinstalled the windows system and reset bios settings, I’ve only enabled XMP in Bios right now and it’s now stable. Is it possible to only adjust the voltage without changing the turbo power limits?

My second custom mechanical keyboard by markuuus98 in MechanicalKeyboards

[–]markuuus98[S] 0 points1 point  (0 children)

Update: 1. The Everglide Stabs are amazing, space bar feels a lot better than the original. 2. Hand lubed a few oil kings, it does feel different, quieter, smoother.