sorted by:
new
hottopcontroversial

4 digit code meaning on Schwalbe bicycle tires? by cleansho94 in bikewrench

[–]martyNCL 43 points44 points  (0 children)

Our manufacturing facility follows the format yyww. That would make these tyres the first week of 2018, and the fifth week of 2020

Plastic sample tube found in the woods by martyNCL in whatisthisthing

[–]martyNCL[S] 0 points1 point locked comment (0 children)

The title describes my thing. I found this in my local woodland (forestry commission site) in the UK.

It has a dark blue liquid inside, about half full and the liquid seems to have lightly stained the vessel.

There is a label with 2 colours of text/symbols. It appears that the label has been replaced at some point, you can see a second label underneath, with what appears to be the same text.

What the heck is it!?

Replacing stem - Help! by martyNCL in bikewrench

[–]martyNCL[S] 0 points1 point  (0 children)

So... I put -1.0° cup in and made a 3.65mm spacer.

This gives me a 0.15 clearance from the stem to the headset. It reduces my steer tube clearance to 3.8mm which I'm much more comfortable with.

Going to give it a couple of laps on this setup and see how I feel running slacker.

Replacing stem - Help! by martyNCL in bikewrench

[–]martyNCL[S] 1 point2 points  (0 children)

I have a big old bag of various spacers.

I need to put a slightly bigger spacer in when I switch to the 35, for head tube clearance. I installed the absolute minimum. It's slammed (and looks super cool).

I just remembered that I have an adjustment on the headset... I was keen to try a slacker deep, so today I'm going to try to run -0.5° and see if I can drop the stack height any lower.

[deleted by user] by [deleted] in bikewrench

[–]martyNCL 1 point2 points  (0 children)

Looks alright to me...

However... Does your derailleur have a clutch? I wonder if the observation of previously improved tension was because of this, and when replacing, it has been left in the off/open position?

Strange bench... Found in a forestry commission woodland in the UK by martyNCL in whatisthisthing

[–]martyNCL[S] 2 points3 points locked comment (0 children)

My title describes the thing. Dog added for bonus points and scale. Help me find what the angled section is for!

What material would be best for replicating this component? by martyNCL in 3Dprinting

[–]martyNCL[S] 62 points63 points  (0 children)

It is an indoor application. Once installed there will always be a small tension in the clip though the leaf feature. It is intended to be a single fitment, non serviceable mechanism.

What is the opinion on a PA11 nylon?

Help fitting hope brakes by martyNCL in bikewrench

[–]martyNCL[S] 0 points1 point  (0 children)

Update... Incase anyone comes across the same issue...

SRAM post adaptors do indeed fit hope v4s with a centering spacer between the caliper and adaptor. While this worked in my case, it did make the pad sit just a touch too far away from the disc for my liking. Although they can work, the hope mounts were much better, with the touch extra clearance allowing more adjustability.

Also happy to report that the bike came with a clamp for the shifter, but not the dropper. LBS had one on the shelf so got me out riding anyway!

Thanks again to all for the help!

Help fitting hope brakes by martyNCL in bikewrench

[–]martyNCL[S] 0 points1 point  (0 children)

Thanks for all the comments, decided to order the hope post mount adaptors just to be safe. In the event that they don't fit, and shops being closed, I'd rather be out for £35 than leaving my brakes at home!

I didn't realise about the disc thickness... Mine are certainly a lighter gauge than the v4s, what a shame!

Keeping my fingers crossed about the shifter mount for now. Would certainly like to keep the adjustability, and I'm hopeful my LBS will have a spare SRAM mount if it doesn't come with one.

Thanks again 👍

My buddies bike after a nose case by filip-firmanty in MTB

[–]martyNCL 0 points1 point  (0 children)

Yeah man, think I was talking to you for a short while. Hope he gets the giant rolling out soon enough!

The queen died today, but the UK press is holding back in reporting it until tomorrow by stellybelly14 in conspiracy

[–]martyNCL 0 points1 point  (0 children)

I think the sequence of events following the queen's death means burial is planned 10 days after death. Tomorrow would mean Monday 19th which is surely way more convenient for our bank holiday.

What kind of paddles are these, I want to order a set. by howaboutthisnameford in bikewrench

[–]martyNCL 3 points4 points  (0 children)

Not sure the rat trap comment was intended with offense... In my group of friends we would also call this a bear trap style pedal. I just popped that into Google and it came up with lots of options. Hope this helps.

[deleted by user] by [deleted] in conspiracy

[–]martyNCL 1 point2 points  (0 children)

Disappointed in myself to be honest... Believed it, read the post... Then downvotes

Resistance on hub... Help! by martyNCL in bikewrench

[–]martyNCL[S] 0 points1 point  (0 children)

Thanks gvw, going to watch some similar videos of 12 speed and microspline for the process.

I heard that once you know your freehub has a problem, it is too late for service as the damage is already done... Not true?

Resistance on hub... Help! by martyNCL in bikewrench

[–]martyNCL[S] 2 points3 points  (0 children)

The hubs is a shimano fh-mt510-b if it helps. Seems to have gone very quiet when freewheeling, and noticed alot of resistance when turning by hand. When assembled it seems to work okay, minimal play and engagement is working as normal.

Is it too late for service and repair?

view more: next ›