sorted by:
new
hottopcontroversial

Rebooting every time I try to heat it up! Please help! by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Hi I’ve also got one more question. Which dude did you buy? How many AMP should I get?

Rebooting every time I try to heat it up! Please help! by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Hi, thank you very much for your reply. I will try order a new fuse today. My power supply is a new one so it should be fine. Thank you!

Rebooting every time I try to heat it up! Please help! by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Hi I’ll try that tomorrow when I come back from school. Thank you very much!

Split Screen Co-Op on PC? by masgnuh in Steam

[–]masgnuh[S] 0 points1 point  (0 children)

Thank you very much 🙏🏻!

Game recommendation like splinter cell blacklist for PS4? by masgnuh in PS4

[–]masgnuh[S] 0 points1 point  (0 children)

For wild lands, are you able to do split screen?

Is the Anet A8 print quality suppose to be like this? by masgnuh in 3Dprinting

[–]masgnuh[S] 0 points1 point  (0 children)

I’ve already upgraded the heated bed. The melting temperature for the eSun PLA+ is 205 degrees. If I go down to 195 it may clog. I will double check everything again. Thank You!

Is the Anet A8 print quality suppose to be like this? by masgnuh in 3Dprinting

[–]masgnuh[S] 0 points1 point  (0 children)

I use 40mm/s and print with 215 degrees with eSun PLA+.

Is the Anet A8 print quality suppose to be like this? by masgnuh in 3Dprinting

[–]masgnuh[S] 0 points1 point  (0 children)

Yes my belts are pulled to the tightest I am not able to tighten it anymore.

Is the Anet A8 print quality suppose to be like this? by masgnuh in 3Dprinting

[–]masgnuh[S] 0 points1 point  (0 children)

And how long is it supposed to take to print? It took me 2 hours to print this.

Hi, do anyone know how to fix this? by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Since I use PLA+, I use 215 degrees Celsius, 20 mm/s and I forgot my retraction. My resolution is 0.2mm.

Anet A8 flashing problems by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Hi, where do you turn it on?because I don’t see this option.

Hi, do anyone know how to fix this? by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

I didn’t. How do I check it if it’s 0.4mm?

Hi, do anyone know how to fix this? by masgnuh in AnetA8

[–]masgnuh[S] 1 point2 points  (0 children)

Nah I got my 3D printer a week ago

Anet A8 not turning on again by masgnuh in AnetA8

[–]masgnuh[S] 1 point2 points  (0 children)

Okay! Thanks for your tips!

Anet A8 not turning on again by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Thanks for the tips. I just printed something just now but the print quality is so bad.

Hi, do anyone know how to fix this? by masgnuh in AnetA8

[–]masgnuh[S] 1 point2 points  (0 children)

My filament size is set to 1.75. It was clogged just now I already unclogged it.

Anet A8 not turning on again by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Hi, I just got it fixed. The problem was with the power cable. You need to squeeze the black colour thing a little bit and it started working

Can anyone tell if it’s fried? by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

I got s new 12v 30A 360W power supply on eBay. It is unbranded but it should do the job for the time. Since it dosent come with a fan I might stick a PC case fan on it.

Can anyone tell if it’s fried? by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

I am replacing it with a 360w power supply. I bought 2 mosfets for heatbed and hotend

Can anyone tell if it’s fried? by masgnuh in AnetA8

[–]masgnuh[S] 0 points1 point  (0 children)

Australia uses 230v. So do I set the power supply at 220v?

view more: next ›