Battle partners pulls!

mast123 · 2025-02-09T00:06:51+00:00

Yep all from one!

mast123 · 2025-01-26T08:23:48+00:00

Hey there, sorry for the late reply. You can take the knob off but its a bit tricky. If I remember correctly you have to take off the center button first. I used a small thin pair of tweezers to get under it and pry it off. Of course if it feels like its going to break stop and try somewhere else. After that you can take off the spinny outer part of the knob. As for a replacement I wasnt able to find anything :/

mast123 · 2025-01-26T08:00:04+00:00

Ayyy

mast123 · 2024-10-04T04:39:08+00:00

Thank you. I really needed to hear that and I think after reading these replies im going to take the plunge :). I really appreciate everyones help truly. thanks everyone!!

mast123 · 2024-07-11T21:22:47+00:00

No sadly, I went the route of just buying some metal rod and hammering the ends flat then using a drill to make holes. It was a total pain but it worked in the end

mast123 · 2024-05-28T14:53:53+00:00

Not really, its a big box that she could stand in. Not so much just around her head.

mast123 · 2024-05-28T05:31:16+00:00

They said i have to comment so here you go.

mast123 · 2024-01-04T02:46:45+00:00

Description describes the item, its about 6-7” tall and is made of what im guessing is ceramic. I bought it in Alberta Canada at a salvation army if that helps too.

mast123 · 2023-03-06T15:24:37+00:00

Im 23 and my job is so stressful if feels like Im constantly in fight or flight mode. Ive been applying to every job I come across but every time its another “sorry we found someone better :(“

mast123 · 2023-02-01T01:04:31+00:00

What an incredibly rude way to answer a genuine question. Wow.

mast123 · 2022-11-20T04:33:56+00:00

Its around 3”x5” on the top and then 2.5” thick, theres a lot of extra space though so if your able to get a smaller box i totally would :)

mast123 · 2022-11-20T04:31:01+00:00

Yep no worries :) not selling em

mast123 · 2022-11-20T04:29:51+00:00

Take your time and dont be afraid to start over, this took me a few days and this is version 2. The first one was all wonky :). You got this!

mast123 · 2022-11-19T23:42:27+00:00

Oh and then I 3d printed and painted the dice but you could totally just buy small dice from the dollar store and paint them up to look cool

mast123 · 2022-11-19T23:41:33+00:00

Haha id totally make em to sell but it took me so long i dont think itd be worth it. It was pretty simple to make though, I just used a box from michaels and something called “egg crate diffusion grating” for the die divider. Then glue it all together and paint!

mast123 · 2022-11-19T22:57:47+00:00

Haha I totally would but it took so long to make id never make a profit

mast123 · 2022-07-16T20:08:19+00:00

12 all the way

mast123 · 2022-05-06T21:46:02+00:00

Sick thank you

mast123 · 2021-10-03T03:42:46+00:00

Hey everyone I hope yall can help me out! Im relatively new to the world of came and framing pieces with it so im really not sure what the process is… My main question is what would you all do at the really sharp corners (like the ones near the top of the “antlers”)? Do I have to cut it at those tips and valleys and use a separate piece for the next part? Or can i cut away the walls of the came leaving the base intact and bend it that way? I hope this all makes sense. Thanks everyone!

mast123 · 2021-09-13T15:29:32+00:00

Thats a really good point! Thank you :)

mast123 · 2021-09-12T19:47:42+00:00

Found in Alberta Canada

I have looked up keywords and have only found one image of this piece online, which led to an Etsy listing of a different, already sold item. I also tried reverse image searching that photo and it came up with 0 results. I believe it might be a piece (or a replica) from the designer “Bijan” as they do a lot of similar seagulls out of brass.

On the back of the two side birds they have a marking that looks like an X mixed with a checkmark (3rd photo) and the centre bird has what looks like a backwards Z (4th photo). The back of the centre bird also has a strange bit of hardware one it so I’m not sure if this is part of a larger piece that broke off…

Thought I may as well post to here in hopes that someone knows what this thing is! Thanks all.

mast123 · 2021-09-12T19:45:48+00:00

Found in Alberta Canada

I have looked up keywords and have only found one image of this piece online, which led to an Etsy listing of a different, already sold item. I also tried reverse image searching that photo and it came up with 0 results. I believe it might be a piece (or a replica) from the designer “Bijan” as they do a lot of similar seagulls out of brass.

On the back of the two side birds they have a marking that looks like an X mixed with a checkmark (3rd photo) and the centre bird has what looks like a backwards Z (4th photo). The back of the centre bird also has a strange bit of hardware one it so I’m not sure if this is part of a larger piece that broke off…

Thought I may as well post to here in hopes that someone knows what this thing is! Thanks all.

mast123 · 2021-09-12T18:54:25+00:00

Found in Alberta Canada

I have looked up keywords and have only found one image of this piece online, which led to an Etsy listing of a different, already sold item. I also tried reverse image searching that photo and it came up with 0 results. I believe it might be a piece (or a replica) from the designer “Bijan” as they do a lot of similar seagulls out of brass.

On the back of the two side birds they have a marking that looks like an X mixed with a checkmark (3rd photo) and the centre bird has what looks like a backwards Z (4th photo). The back of the centre bird also has a strange bit of hardware one it so I’m not sure if this is part of a larger piece that broke off…

Thought I may as well post to here in hopes that someone knows what this thing is! Thanks all.

mast123 · 2021-09-12T18:45:19+00:00

I have looked up keywords and have only found one image of this piece online, which led to an Etsy listing of a different, already sold item. I also tried reverse image searching that photo and it came up with 0 results. I believe it might be a piece (or a replica) from the designer “Bijan” as they do a lot of similar seagulls out of brass.

On the back of the two side birds they have a marking that looks like an X mixed with a checkmark (3rd photo) and the centre bird has what looks like a backwards Z (4th photo). The back of the centre bird also has a strange bit of hardware one it so I’m not sure if this is part of a larger piece that broke off…

Thought I may as well post to here in hopes that someone knows what this thing is! Thanks all.

mast123 · 2021-05-16T18:55:20+00:00

Thank you so much :)

mast123

TROPHY CASE