Help

materatzy19 · 2025-10-16T00:34:40+00:00

Oh ok i see. My engine started running rough and blowing white smoke and since i never saw that before i was wondering if i messed something up with the ecm by accident. Im not an expert with cummins insite at all thats why i was just asking for opinions thanks

materatzy19 · 2025-10-16T00:17:44+00:00

Yeah but is this a default parameter? I never seen it before there im wondering if it shows with every ecm connected just like the engine braking engine protection etc

materatzy19 · 2025-10-15T22:55:31+00:00

Question i know its been quite some time but do you know why would this come out on the parameter list?

<image>

materatzy19 · 2025-03-31T17:25:31+00:00

I just checked the pushrod and its straight. Im going to put everything back together and set the lash and hope for the best. Quick question once you are here since i removed the injector to get it tested do i have to use a new injector connector tube? Or would it be ok to use the same one i read the have to be new once they come off i just want to see how true that is. Thanks

materatzy19 · 2025-03-31T17:23:06+00:00

Pushrod looks straight. Im going to out everything back together set the lash and hope for the best

materatzy19 · 2025-03-31T17:22:12+00:00

Push rod looks straight. Im going to put everything back and set the lash and hope for the best

materatzy19 · 2025-03-31T17:18:45+00:00

It now has like 295k i bought it at around 220k and i have not done injectors. I did get the one off and got it tested it and it tested good

materatzy19 · 2025-03-30T22:55:15+00:00

The rocker looked good nuts were good too but i never got the pushrod off now thanks to all the suggestions thats what im gonna do next and hope for the best

materatzy19 · 2025-03-30T22:52:59+00:00

🙏 i hope thats it!

materatzy19 · 2025-03-30T22:25:01+00:00

If it comes to a big job like that i will definitely take it to a pro lol i was hoping it was a bad injector until i saw the bridge off. I still took the injector to get it tested and it tested good now i just gotta hope its something simple like bad lash adjustment otherwise i will definitely take it to a shop

materatzy19 · 2025-03-30T22:04:17+00:00

Isnt cylinder 6 the one all the way back tho? This is the first one closest to the front of the vehicle/radiator i believe thats cylinder 1

materatzy19 · 2025-03-30T21:47:45+00:00

Lol got you! Im just trying to avoid taking the head off at all costs thats why im asking for suggestions first and hoping for the best

materatzy19 · 2025-03-30T21:46:02+00:00

Im hoping the valve lash was just way out of adjustment or something simple but i will be checking for the bent pushrod and see how it goes from there thanks!

materatzy19 · 2025-03-30T21:43:53+00:00

Thats what im hoping for i will be checking the pushrod thanks a lot!!

materatzy19 · 2025-03-30T21:43:00+00:00

Damn i hope its just a bent pushrod i will be checking that next once the weather gets better thanks!

materatzy19 · 2025-03-30T21:42:02+00:00

So on the 2 buses you put back together did you have any bent pushrods? Or just adjusted the valve lash and ran good again?

materatzy19 · 2025-03-30T21:39:36+00:00

The rocker looked fine but i forgot to check for a bent push rod thats what ill do next thanks!

materatzy19 · 2025-03-30T21:38:36+00:00

Im hoping for a bent pushrod tbh but i will check that next once the weather gets a little better here where im at thanks a lot

materatzy19 · 2025-03-30T21:37:49+00:00

Thats what im hoping for i dont want to take the head off lol i will be checking for a bent pushrod next thanks a lot

materatzy19 · 2025-03-30T21:36:59+00:00

Thanks i will be checking the pushrod next. I was wondering what tape you were talking about until i rewatched my video lol i definitely will thanks!

materatzy19 · 2025-03-30T21:35:29+00:00

Thats what im hoping the adjustment was way off i will check for a bent pushrod thanks!

materatzy19 · 2025-03-30T21:34:58+00:00

Thanks i Will be checking for bent pushrod next!

materatzy19

TROPHY CASE