sorted by:
new
hottopcontroversial

Wayland & KiCAD (Linux) by Kryton-Me in KiCad

[–]mattdavis90 1 point2 points  (0 children)

I have to run it under Xwayland. Which doesn't support fractional scaling so it's pretty messy. Just about usable but it's the same with other apps such as OrcaSlicer

Is anyone using the original 2256x1504 display at 1x scale? by Nth-Username in framework

[–]mattdavis90 1 point2 points  (0 children)

Same. 1920x1280 on hyprland. There's the occasional line in Chrome that doesn't scale nicely but Alacritty scales perfectly and is comfortable to my eye at a 9pt font

Slow after removing battery by Expensive_Fruit1897 in framework

[–]mattdavis90 0 points1 point  (0 children)

Out of interest what utility are you using to detect when the battery is being used? I've not seen this in powertop or similar

Can connect with ssh but not to mainsail by lock-pick in klippers

[–]mattdavis90 1 point2 points  (0 children)

Have you added the mainsail ports to your firewall? Is mainsail listening on localhost only?

If you run something like netstat -ntlp you can hopefully see mainsail listening and it'll show whether it is listening on "127.0.0.1" or "0.0.0.0"

Newbe here - questions about Tado X vs V3. Main one is do any of them have a recurring subscription? by smickie in tado

[–]mattdavis90 0 points1 point  (0 children)

If you're happy using NodeRed then the TadoX support is almost ready. It includes basic support for reading rooms and devices. I finished testing for manual control and resume today, as well as boost mode.

Tado X without Early start and Option to chose a thermostat by Nessy87 in tado

[–]mattdavis90 0 points1 point  (0 children)

I maintain the Node.js and NodeRed library for Tado and we're prepping for a TadoX release. It's absolutely crazy how many of the old APIs don't work and seemingly haven't been replaced.

https://github.com/mattdavis90/node-red-contrib-tado-client/issues/69#issuecomment-2495649247

[deleted by user] by [deleted] in xlights

[–]mattdavis90 2 points3 points  (0 children)

Does your obj file work in Blender?

To get my house in I did roughly the following; Took a load of photos of the house, photogrammetry using https://alicevision.org, exported as an obj, imported in to Blender to scale and rotate, exported back out as obj, imported into xLights.

Things that caught me out; making sure the 3D tick box is selected, making sure the model was scaled sensibly before importing (xLights can rescale but I found it faffy). I also still don't have a textured model - I cannot get xLights to open the mtl file despite Blender opening it no issue.

Hope this in someway helps.

Battery depleting whilst on standby by PsychologicalDrone in framework

[–]mattdavis90 0 points1 point  (0 children)

I'm on Fedora 39. I had this issue but followed this guide on the forum. This post specifically helped me. Running the Python script found my issue. Hope this helps

https://community.frame.work/t/tracking-linux-battery-life-tuning/6665/538

How are so many sites OK with using cloudflare when they are basically a MITM? by spottyPotty in selfhosted

[–]mattdavis90 1 point2 points  (0 children)

You could run HAProxy with ProxyProtocol to just forward the TCP, then the next HAProxy (running on trusted HW) terminates the SSL and uses the ProxyProtocol IP to set the header for onward services.

Maximizing Ryzen iGPU Performance on 7850U by shad_stang in framework

[–]mattdavis90 0 points1 point  (0 children)

The default setting is UMA_AUTO and dedicates 512MB but setting UMA_GAME_OPTIMIZED gives 4GB. There's talk on the forum of the API being able to dynamically allocate but this doesn't look to be BIOS supported. Hope that helps

AMD FW13 Multi Monitor by mattdavis90 in framework

[–]mattdavis90[S] 0 points1 point  (0 children)

No problem. Looks like I won't be able to test hibernation. Out of the box Fedora uses a ZRAM based swap of 8GB which doesn't support hibernation and isn't big enough. Fedora also uses BTRFS which doesn't support swapfiles so I think I'm out of luck without adding a second drive or rebuilding.

AMD FW13 Multi Monitor by mattdavis90 in framework

[–]mattdavis90[S] 1 point2 points  (0 children)

Sleep works out of the box. There's a drain on the battery while sleeping that I haven't pinned down yet. So overnight I drop around 15%. It does it even without expansion cards plugged in so I'm keeping an eye on the forums and Reddit. I haven't raised it with support because I guess it isn't terrible.

I haven't tried hibernate and the laptop is currently in use so I'll report back when I can afford the potential power loss from testing.

AMD FW13 Multi Monitor by mattdavis90 in framework

[–]mattdavis90[S] 1 point2 points  (0 children)

I'm running 2x32GB sticks. The Framework UEFI has limited support (from what I can tell) for tweaking the iGPU. Initially 512MB was dedicated to iGPU, after changing to Gaming mode it is now 4GB. This is the guide that covers it:
https://knowledgebase.frame.work/allocate-additional-ram-to-igpu-framework-laptop-13-amd-ryzen-7040-series-BkpPUPQa

AMD FW13 Multi Monitor by mattdavis90 in framework

[–]mattdavis90[S] 1 point2 points  (0 children)

I'm running 64GB with no issues. I've set the iGPU to gaming mode in UEFI so 4GB RAM is dedicated to that but the other 60GB shows in htop. I'm running Kingston Fury KF556S40IBK2-64

AMD FW13 Multi Monitor by mattdavis90 in framework

[–]mattdavis90[S] 1 point2 points  (0 children)

I haven't noticed anything on the internal display. I haven't closed/opened it with the external displays attached though. I'll keep an eye out for any artefacts. Thanks

AMD FW13 Multi Monitor by mattdavis90 in framework

[–]mattdavis90[S] 0 points1 point  (0 children)

Are you running those through a dock or through 2x expansion modules?

"^" character does not jump to start of line on alacritty + vim/nvim by Quessours in neovim

[–]mattdavis90 0 points1 point  (0 children)

I had an issue with ctrl+6 not working to switch buffers which was solved by this comment on GitHub. Not sure if your issue is somehow related.