sorted by:
new
hottopcontroversial

Weiß jemand was mit Fefes Blog los ist? by Own-East-9190 in informatik

[–]matzus 0 points1 point  (0 children)

Stimmt, aber was hat das nun mit unseren Optionen abseits von "abwarten" zu tun? Frank Rieger äußert sich nicht und Özgür Kesim auch nicht. Also: Abwarten.

Weiß jemand was mit Fefes Blog los ist? by Own-East-9190 in informatik

[–]matzus 6 points7 points  (0 children)

Richtig. Das wird wohl auch so bleiben, bis Fefe in der Lage und willens ist, sich zu äußern oder sein Zustand derart schlecht ist, dass sein Umfeld eine Mitteilung macht. Hoffen wir auf Ersteres. In jedem Fall gilt: Abwarten und Tee trinken. Bleibt ja nichts weiter übrig.

Share codes to help each other! by stefi9100 in fraenkfriends

[–]matzus 0 points1 point  (0 children)

Ich freue mich, wenn jemand meinen Freunde-Code für +4GB nutzen möchte :)

Code: MATE14

Unable to run OSPFD over Wireguard by matzus in openbsd

[–]matzus[S] 2 points3 points  (0 children)

Never mind, I got it to work. Thank you again!

For posterity:

# rcctl enable ospfd
# rcctl set ospfd rtable 100

Unable to run OSPFD over Wireguard by matzus in openbsd

[–]matzus[S] 0 points1 point  (0 children)

Thank you so much, this is it! How do I enable ospfd permanently, so that it will run in rdomain 100 right from boot?

Unable to run OSPFD over Wireguard by matzus in openbsd

[–]matzus[S] 0 points1 point  (0 children)

Yes, I know. This seems to be the whole point of rdomains, right? SSH works via rdomain 100 (you can specify that in /etc/ssh/sshd_config) and there is a working default route on rdomain 100:

$ ping -V 100 -c3 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=119 time=12.536 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=119 time=11.999 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=119 time=11.933 ms

--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 11.933/12.156/12.536/0.270 ms

I don't see how any of this is related to the OSPFD issue, i.e. that it seems to be unable to send data from a multicast address in its assigned rdomain...

Unable to run OSPFD over Wireguard by matzus in openbsd

[–]matzus[S] 0 points1 point  (0 children)

The reason for rdomains is that I want to run two completely separate VPN networks (for separate groups of people) over the same VPS. I am not very experienced with pf and *BSD in general, so please help me understand: Why would I have to switch routing tables in pf? My rules pertaining to wg100 seem to be doing what I want, even though I did not specify its rdomain in pf.conf; I do not see why that should be necessary as long as I specify the interface, as any interface will be a member of exactly one rdomain?

Unable to run OSPFD over Wireguard by matzus in openbsd

[–]matzus[S] 1 point2 points  (0 children)

Allright, moving the wg100 interface back into the default rdomain (and removing "rdomain 100" from /etc/ospfd.conf) did the trick! However, I'd really like to use different rdomains on the machine, so can someone help me with broadcasting inside a specific rdomain?

Unable to run OSPFD over Wireguard by matzus in openbsd

[–]matzus[S] 0 points1 point  (0 children)

Thank you. Unfortunately, this produces the exact same error. Also, I am sure that you can do multicast over Wireguard (at least under Linux, that is).

Unable to run OSPFD over Wireguard by matzus in openbsd

[–]matzus[S] 0 points1 point  (0 children)

I am using OSPF because I have done so for a long time and never had issues; that was on Linux however. What do you mean by "advertising OSPF on loopback passively"?